Discountinued
SDSHobby
Hobbywing EZRUN Brushless System Combo (120A ESC +KV4000 Motor +Program Card) for 1/10 SCT/Scale Short Course Truck
Output Current | Continuous 120A, burst 760A |
Input | 6-12 cells Ni-MH/NiCd or 2-4S Lipo |
BEC Output | 6V/3A (Switching mode)* Note #1 |
Resistance | 0.0004 Ohm |
Motor Supported | Sensorless Brushless Motor |
With 6 cells Ni-MH/NiCd or 2S Lipo | KV≤6000; |
With 7-9 cells Ni-MH /NiCd or 3S Lipo | KV≤4000; |
With 10-12 cells Ni-MH /NiCd or 4S Lipo | KV≤3000; |
Suitable Car | 1/10 4WD SCT, 1/8 2WD and 4WD buggy/SCT (Include TRAXXAS 1/10 SCT) |
Size | 59mm (L) * 38mm (W) * 34mm (H) |
Weight | 113g |
* Note #1 | The cooling fan of EZRUN-WP-SC8 is powered by the built-in BEC. |
KV VALUE | KV4000 |
Motor Diameter | 36mm |
Motor Length | 56mm |
Extended Shaft Diameter | 3.17mm |
Extended Shaft Length | 18mm |
Connector Type | 4.0mm Banana Connector |
Voltage | 7.4V (2S LiPo) |
Weight | 210g |
Size | 88mm (L) *58mm (W) *14mm (H) |
Weight | 40g |
EZRUN-WP-SC8 Water-proof ESC:, Suitable Brushless Motor:, Rotor Pole: 4, Program Card:, Input Voltage: 4.8V—6.0V(Battery Pack is needed to supply power for program card, only if the ESC without BEC output.), Programmable Items:, Running Mode,
EZRUN Brushless Sensorless Motor 3656/
KV4000
:
Drag Brake Force
Low Voltage Cut-off
Start Mode
Brake Force
Reverse Force
Initial Brake Force
Neutral Range of Throttle
Timing
Over-Heat Protection
Motor Rotation
Lipo Cells
Check price and availability
Found 11 years, 8 months ago