SDSHobby
Hobbywing EZRUN Brushless System Combo (25A ESC + 2030 12T Motor +Program Card) for 1/18 Car On-Road Racing Car/ Off-Road Buggy
| ESC | EZRUN-25A-Sensorless 1pcs |
| Motor | EZRUN-2030 12T Brushless motor 1pcs |
| Program Card | Digital LEDs Program Card 1pcs |
| Output | Continuous current 25A, burst current 90A |
| Input | 4-9 cells Ni-MH/NiCd or 2-3 cells LiPo |
| BEC Output | 6V/1.5A |
| Resistance | 0.005 Ohm |
| Motor Supported | Sensorless Brushless motor |
| u With 4-6 cells Ni-MH/NiCd or 2 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| u With 6-9 cells Ni-MH/NiCd or 3 cells Lipo | On-Road≥18T, Off-Road≥24T; |
| Suitable Car | 1/16 or 1/18 scale car for sportful race |
| Size | 31.5mm (L) * 27.5mm (W) * 16mm (H) |
| Weight (Without wires) | 23g |
| With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock Crawler mode. |
| Turns | 12T |
| KV value | 7800KV |
| Diameter | 20mm |
| Motor length | 30mm |
| Extend shaft Diameter | 2.0mm |
| Length of extend shaft | 10mm |
| Weight | 46g |
The Combo Includes the Following Products:, Suitable Brushless Motor:, Features for ESC:, Compatible with all sonsorless brushless motor, Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection., Features for Motor:, Aluminum shell (case),
1/18 or 1/16 Ezrun Brushless ESC for Car 25A
:
Use top quality electronic components to enhance the current endurance ability of the ESC.
Excellent start-up, acceleration and linearity features.
With 4 steps of maximum reverse force adjustment
Proportional ABS brake function with 4 steps of maximum brake force adjustment,
8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
With 9 start modes (Also called "Punch”) from "Soft" to "Very aggressive" to suitable for different tracks.
With 8 steps of timing adjustment to get the best compatibility with various of motors
Easily program with only one button and compatible with pocket-sized program card
The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box.
1/18 and 1/16 EZRUN-2030 Brushless Motor for Car 12T
:
High quality magnets
Copper wires of high temperature endurance
Good quality bearings
Dustproof design for the motor
Check price and availability
Found 11 years, 7 months ago