HobbyKing
Multistar Elite 3508-268KV High Voltage Endurance Motor
| KV(RPM/V) | 268KV |
| Lipo cells | 4-8 s |
| Max current | 330W |
| Max Amps | 11A |
| No Load Current | 0.13A/10V |
| Internal Resistance | 0.618 ohm |
| Number of Poles | 12/14 |
| Dimensions(Dia.xL) | 35×8 mm |
| Motor Shaft | 4mm |
| prop shaft | 5mm |
| Weight | 96g |
| bolt hole spacing | 19*25 mm |
| Lamination thickness | 0.2 mm |
| Magnets | N45 SH |
| Bearing | EZO Japan |
| Balancing spec | 0.005g |
The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficacy/power to be optimized.
Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from EZO Japan bearings, n45sh Magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, Perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art
The Elite 3508 268kv Has been optimized for 8s operation and a 12~14inch propeller. The Motor comes with removable/replaceable knurled prop shaft and direct bolt style propeller mounting options. The high efficiency and low amp draw of HV setups take advantage of higher density/low C batteries, and offer record breaking flight times.
Multistar Elite is unmatched in quality and value, and the performance speaks for its self.
• EZO Japan Bearings
• N45SH Magnets
• .2mm Laminations
• 180deg oxygen free Copper wire
• .005g Or ...
Check price and availability
Found 5 years, 4 months ago
at
HobbyKing