ngHobbies
xBee Interface Adapter Pair
| Industrial operating temperature range | -40 ° C to +85 ° C. |
Specifications of the USB module:, pre installed FTDI USB to serial converter chip, no driver is requored for most Windows systems., The following items are included in this kit:, 1 x USB Interface adaptor, Important:, xBee modules are NOT included in this kit., Manual:,
This interface pair has been developed by New Generation Hobbies to provide an alternative option for Mikrokopter users to the WI.232 wireless modems. This package contains 2 interface boards, one with integrated USB and the second for connection to the Mikrokopter. Simple plug and play opertaion, no soldering required.
The USB interface is used to configure the xBee modules (sold separately) to communicate with each other. Once the configuration is complete, one can connect the interface to the Mikrokopter and will have the same wireless link as with the WI.232.
The USB interface replaces the MKUSB, which is NOT required to be used with this link.
powered directly from the USB
built in 3.3V power supply for the xBee and xBee Pro modules.
red LED - power on and operation indicator.
convenient 2 line 10 pin connector so the xBee module can be plugged in directly.
no external components required (except for the xBee modules)
Enhanced Data Rate (EDR) v2.0.E.2 with the specification of 2Mbps and 3Mbps
USB v2.0 compatible
1 x Mikrokopter interface adaptor
1 x 10 cm 10 pin ribbon cable
2 x 2 lines 10 pin snap on connector for the ribbon cable
Note
This is a kit, not a final product. About 10 minutes of work is still required to complete the configuration of the xBee modules.
Click here
This is sold as it is for private, non-commercial use.
xBee and xBee Pro is a Trademark of Digi International Inc..
Check price and availability
Found 11 years, 7 months ago