Hobby-Lobby
DS8717HV High Voltage Ultra Speed Servo
Size Category | Standard |
Type | Digital |
Speed | .06 sec/60 degrees |
Length | 1.58 in |
Width | 0.82 in |
Height | 1.57 in |
Weight | 2.6 oz |
Bushing Or Bearing | Bearing |
Bearing | Dual |
Motor Type | Coreless |
Gear Type | Metal |
Gear Material | SuperSteel™ |
Deadband | Less than .001ms |
Technical Specifications:, DS8717HV High Voltage Ultra Speed Servo Specs, Application:, 50-size and larger helis, cyclic, Torque:, 230 oz/in (2S LiPo battery), Connector Type:JR, Voltage:, 7.4V (2S LiPo battery),
DS8717HV High Voltage Ultra Speed Servo
With its new aluminum case, SuperSteel™ gears, a high voltage motor and improved electronics, the 8717 takes helicopter servos to a whole new galaxy of performance.
Plus it maintains JR's legendary reliability and unmatched, true zero-deadband precision.
Battery chemistries such as LiPo, LiIon, and LiFe have become very popular within the RC community. They are the standard for powering electric motors and have also gained popularity as receiver battery packs. The issue is the output voltage of these batteries is higher then the previous standard 4 - and 5-cell NiCd and NiMH packs, 4.8V and 6V respectively. The higher voltage is not an issue with the receivers but can be for the servos. Many servos will not operate at these higher voltages for very long before burning out the motors or electronics.
To get around this issue modelers have had to use a regulator to drop the voltage to an acceptable operating range for their servos, usually around 5 to 6 volts. The addition of a regulator adds a component that, should it fail, can cause the loss of a model.
JR's HV servos are designed with motors and electronics that operate off the direct voltage of a 2-cell LiPo, LiIon, or LiFe receiver battery pack (6.6V to 7.4V nominal voltage). This eliminates the need for a regulator and lowers the chance for a power failure that can cause a catastrophic failure of your model. Also note that the HV servo specs are shown at the higher voltage (7.4V 2S LiPo) but will still operate on a standard 5-cell 6V NiCd, Ni MH battery with a reduction in performance of approximately 10% in speed and torque.
DS8717HV High Voltage Ultra Speed Servo Highlights
Rugged new aluminum case
JR® SuperSteel™ gears for high precision, long wear
Exclusive motor designed for high voltage applications
Outstanding precision combined with outlandish performance
Check price and availability
Found 11 years, 7 months ago