RCPlanet
Novak Goat 3S Brushless/Brush ESC NVK3214
, Input Voltage:, 2-3S Li-Po cells or 4-9 NiMH cells (1.2V/cell), Size:, 1.18 x 1.54" (30 x 39.1mm), Weight:, 1.50oz. (42.6g) without wires, Design:, Sensor-based, Motor Limit:, 13.5-turn (2S Li-Po) and 18.5-turn (3S Li-Po), Novak 540-size sensored brushless 27-turn (2S Li-Po), and 33-turn (3S Li-Po) 540-sized brush motor, On-Resistance (brushless):, 0.00070 ohms @ 25°C trans. temp., BEC:, 6.0 volts DC / 5.0 amps, External BEC:, 6.0 volts DC/3.0 amps switching regulator, Rated Current:, 150 Amps @ 25°C trans. temp., Braking Current:, 150 Amps @ 25°C trans. temp., Status LEDs:, 4, Voltage Cut-Off:, 6.25V (2S) or 9.75V (3S) (when LiPo Cut-Off Circuitry is enabled), Power Wires:, 14G Super-Flex Copper-Strand Silicone Wire, ,
Novak's Goat is back and more versatile than ever. The Goat 3S Crawler Brushless/Brush ESC is one of the few crawling-specific, sensored speed controls available and is packed with dozens of features to preserve its superiority on the rock-crawling course. It has the ability to run on either two or three-cell Li-Po batteries, which the speed control automatically detects through Novak's auto-detect software. This feature allows users to run a wider range of batteries and bestows the Goat 3S with even more power than the original 2S Li-Po Goat Crawler ESC (#3219). Additionally, one of its three profiles is specific for worm-drive vehicles - such as Losi's 1/10-Scale Comp Crawler Race Roller and Kyosho's Rock Force 2.2 - which do not require electronic drag brakes.
Though the Goat 3S offers dozens of customizing opportunities, its completely programmable interface is preset to excel in any crawler rig, whether it be worm-drive or standard vehicles. Simply install it, push the One-Touch button and the Goat 3S will easily maneuver through any terrain. The powerful speed control also comes equipped with instant reverse via Novak's Zero Reverse Delay, which provides immediate power delivery in both forward and reverse directions. Additionally, the Goat 3S's third profile features a fully programmable brushed motor option to allow motor experimentation and reduce overall cost.
Fully programmable, user-friendly interface with six adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (5 settings), Drive Frequency in brush mode (7 settings), Li-Po Cut-Off and Reverse Motor Rotation.
No external programming device necessary. Novak's One-Touch Set-Up for quick, easy transmitter setup. Water-resistant case with gasket seal. Sensor-based for excellent braking and low-speed driveability. Four status LEDs for easy programming and troubleshooting. Auto Detect Brushed Motor Mode. Locked Rotor Detection and Thermal Overload Protection.
Requires:
Motor such as the Novak Crawler Series Forty Five Fifty Five or the Novak SS Pro series motors.
Check price and availability
Found 11 years, 7 months ago