LowPriceRC
Radiolink 2.4GHz 7-CH RC System for Helicopter & Airplane Mode 1 w/R7EH receiver
Specification of T7F Radio control:,
1648
Radiolink 2.4GHz 7-CH RC System for Helicopter & Airplane Mode 1 w/R7EH receiver Model Number: RAD-T7F-M1
Features:
Improved through functional, performance and stability
Better responsiveness
Each of the 7 channels can be adjusted independently under the CCPM model
The radio detects those channels which have been occupied and selects a channelwhich is still available, automatically after the radio has been switched on.
Each radio has unique identification code, and once the receiver has found and locked the most recent radio's identification code, the receiver will no longer need to match the code again even if it had been power off.
This radio has been integrated with FHSS technology for advanced anti-interference and will never lose control.
This product has passed various safety tests and has received FCC and CE certificates.
Stable control range up to 350 meters from the ground, and 700 meters from the air
Can be controlled by left or right hand
LCD screen on the radio for editing programme, storing up to 7 planes' settings such as model name, dual rate and exponential, end point adjustment and trim settings.
Low power warning if the voltage reached under 8.6v
ACRO Mode & Heli Mode:
ACRO mode: External switches operate dual rates (D/R), landing gear, and trainer cord or “buddy-box†capabilities. Programming features include servo reversing and E.P.A on all channels, dual rates, exponentials and programmable mixing. Additionally, any one of four, factory-set, preprogrammed “wing-type†mixers including flaperon, and V-tail, elevon mixing may be selected.
HELI mode: Dual rate (D/R), Idle up, Throttle hold, and Gyro sense can be operated by switch. Two different gyro senses can be set with RadioLink GY100 Gyro on gyro function of this transmitter. Programming features include servo reversing and E.P.A on all channels, dual rates, exponentials, throttle curve, pitch curve, throttle hold, and pit to rudder mixing(REVO). Additionally, any one of two, factory-set, preprogrammed “swashplate type†mixers, including three servo type 3-S, may be selected.
Transmitting on 2.4 GHz band
Operating system: 2 stick, 7 channel system
Modulation: 2.4 Ghz/ FHSS
Power supply: 12V battery
Current drain: 80mA
Receiver: RadioLink R7EH
RadioLink R7EH receiver :
7 Ch 2.4G Receiver
Power Require: 4.8V - 6V
Current Drain: 9.5mA @ 4.8V
Size: 50 x 24 x 15mm
Weight: 11.5g
Include:
T7F Radio control x1
RadioLink R7EH receiver x1
User manual
Notice: Use only new version of R7EH Receiver with this radio. The previous version may not be compatiable.
Check price and availability
Found 11 years, 8 months ago