HobbyWireless
FPV-PRO905 Kit 500mW 900MHz Double Reception - Best 900 MHz system - Camera is optional
| Nominal output impedance | 50 ohms |
| Operating Voltage | 10.5 - 13 volts DC |
| 75-ohm impedance | 1Vp-p |
| 10k ohm impedance | 1Vp-p |
| Sub carrier frequency | 6.5MHz |
| Operation temperature | -10 to 40 degrees Celsius |
| Storage temperature | -40 to 80 degrees Celsius |
| Operating humidity | 20 to 80% |
Details:, If you're looking for a rock solid FPV system with great front and back reception and minimum video drops, then you've got to have this kit., This kit comes with: 1x Plug and Play Transmitter, 2x Receivers, 2x High Gain Antennas and 1x Diversity controller, Connectors/Wires, and you can add a battery, pan and tilt and camera to this kit., For patch antennas position: Place each antenna opposing each other (back to back) pointing 45° or less towards the sky and your video reception will be fully covered front, above and behind., The plug and play board main features:, , Package includes:, - 1x Plug and Play transmitter 500mW 900MHzwith built-in microphone with, Specifications:, , Notes:, - The transmitter will have only the channel 1 (910 MHz) available to USA users to comply with FCC rules., Disclaimer:, Hobby Wireless is not responsable any damage, loss, illegal operation or changes made by the user to the transmitter will be totally the user's responsibility.,
Besides this kit with can also be used with your 2.4 Ghz Radio Control radio without concern of interference.
The transmitter with antenna and most of the mini cameras weight around 80 to 90 grams (3oz)
.
It's a complete plug and play wireless system combo, and within few seconds you have everything connected and working wirelessly.
The Diversity Controller allows you to have two receivers with one antenna each getting video signal from the transmitter at the same time.
The Diversity Controller measures the video signal strength from each receiver then selects the video and audio stream from the receiver that is getting the strongest signal. This switching process happens so fast causing no interruption os missing video frame.
The system uses PLL (Phase-Locked Loop) technology to prevent frequency drift.
- High quality microphone
- Audio volume control
- High quality 5v voltage regulator (no heat and noise free)
- Reverse-Polarity Protection (avoids damage if you plug the battery pack inverted)
- Dual power output (provides selectable power for 5 and 12 volts cameras)
- Molex connector with safety latch (prevents connection to come loose while in use)
- Power LED (helps to identify bad power connection, reminds you to disconnect power when it’s not in use)
The transmitter
four (4) selectable channels
and it is a powerhouse providing 500 milliwatts of pure RF output, perfect for long range applications and even with all this power it only weights around .8oz (22g).
It’s highly recommended to install the transmitter as far as possible from the model's receiver, also highly recommended to install the transmitter in ventilated areas, to allow air flow to keep it cool.
The transmitter can be powered through a JST connector and the receiver using a regular power plug. Any power source from 10.5 to 13 volts DC, example a 3S 11.1v lithium battery will perfectly power your system.
The receiver has high sensitivity providing an extraordinary signal reception, this quality of reception is part of the success of this wireless system.
Now you can add your favorite camera to this combo, by just selecting it from a list below. There is no hassle to connect it, just Plug and Play
.
* HERE WE HAVE SOME SIMPLE TUTORIAL VIDEOS THAT MAY BE HELPFUL *
four (4) selectable channels - Only CH1 is available to US users
- 2x High Sensitivity Receiver R900-STD Standard 900MHz receiver * (upgrade is available below).
- 1x Diversity controller (Please select below either
Oracle
or
EagleEyes)
- 2x Power Plug for receiver is included
-
Universal camera leads are included
- 2x 8dBi Patch antennas
- 3S 11.1 volts 800mAh Lipo battery is optional, you can choose to add or not to this combo.
- 2x A/V output cable with RCA connectors
- 1x stock whip antenna for the transmitter
- Camera is not included, but you can add your favorite camera to plug and play with this combo, see the options below
Fully compatible with any camera PAL or NTSC
Consumption Current 250mAh
Video input voltage
Audio input voltage
CLICK HERE TO CHECK OUR TECHNICAL HELP PAGE FOR SOME EXTRA INFORMATION.
- Do not turn this transmitter on and leave it on for several minutes without air flowing through, it gets hot. This is 500mW transmitter in a tiny little metal box !!!
-
No license is required to purchase it, however i
n order to legally operate within USA an
amateur radio license
is required.
Check price and availability
Found 11 years, 9 months ago