BevRC
FY-40A auto stabilization mode and 3D mode
Input Voltage | 4.0 ~ 6.0 Volt; |
Current Draw | 50mA (5V); |
Size | 45mm x 30mm x 9 mm; |
Weight (Excluding Wires) | 17g; |
Temperature Range | -25 ° C ~ +70 ° C; |
Maximum Rate Of Rotation | ≤ 2000 °/s; |
FY-40A has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. By using your remote control, the unit can be turned on or off for the following functions:, Mode 1: FY-40A Deactivated Mode In this mode, the FY-40A stabilization function is turned off. The aircraft is completely under the control of the pilot., Mode 2: Auto Stabilization Mode In this mode, the FY-40A will automatically command the aircraft control surfaces to maintain level flight at all times., Mode 3: 3D Control Mode In this mode, the balancer utilizes its 3-axis gyroscope to sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle position) the FY-40A will lock the current aircraft attitude. This prevents rolling of the aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be easily maneuvered to complete a variety of 3D flight with added stability and smoothness.,
Standard Configuration
FY-40A control module * 1
RC receiver connecting wires * 1
Velcro double sided tape * 2
Instruction manual * 1
Gyro sensitivity adjustment screwdriver* 1
Technical Specification And Working Requirement
Operating Principle And Function
Aircraft Suitability
Traditional layout fixed-wing aircraft
Flying wings with rudder
Flying wings with no rudder
Airplanes with no ailerons (rudder and elevator only)
V-tail airplanes with aileron and with no ailerons
Check price and availability
Found 8 years, 10 months ago