BevRC
Mastor-G refurbished full function combo
| Weight | 232g without camera |
| roll | 0.07 degrees; pitch |
| 12-hours angle drift | 0.12-1.5 degrees |
| Suitable payload | 120g-400g |
| Suitable flying wind Speed | < 38km/h |
Specs:, Based on STM32 32-bits high-speed MCU(tens of times faster than other open-source solutions), Size:, 10.7(12.5)*11*12cm, Roll angle limit:, > 360 degrees, Pitch angle limit:, >180 degrees, can be controlled by any p, : roll: 178 degrees/s; pitch: 182 degrees/s, Control accuracy:, Recommend camera:, gopro hero1,hero2, hero3, or similar cameras, Power:, 2-4 cell lipo, 3-cell recommend, can be powered as high as 6-cell(the high voltage input need to be reduce the power output parameters in the configuration tool.), COG adjustment range: X: 28mm Y:12mm Z:36mm,
The refurbished verson are mainly coming from the RMA processing, the mainly reasons are faulty IMU, wrongly COG adjusted, burned driving board or controlling board, all refurbished mastor-G has been re-configuration and changed new boards by mastor factory's engineers and flashed the latest firmware, we guarantee the performance is totally the same as the new one after our double check before shipment.
All accessories are included, including the carbon filber frame for gopro hero3.
It shares the same warranty service as the new one.
The package box maybe old or no-mark ones.
The Mastor-G brushless gimbal is equipped with stand-alone IMU controller and 2 custom high-toque pan and tilt brushless motors, also with the AV damping balls to offer you stable video quality during your flight.
Support Gopro Hero1/2/3 HD camera and some small DC under 200g
Super easy to configure based on intelligent PID adaptive algorithm, nearly plug and play, what you need is just to adjust the COG of different cameras, and adjust the power output parameter according to the weight of the camera, no need PID adjustment.
Suitable for multi-rotor bigger than 450mm wheelbase, 700 class or bigger
helicopter
and airplanes with wingspan over 1.8m
roportional channel
(stick or knob, recommend)
,
3-positional
switch channel
Stabilizing speed
Current：160mA ~ 400mA
Support AV out
What's new for this brushless gimbal?
Higher toque custom motor ensure the better performance, 2.3 times toque compared to Yun-1
Drived by a strong 32bit STM32 MCU with special designed IMU algorithm, support 90-degree face to the ground.
No instant current as high as 4A when power on, smooth driving, longer life
No 12k noise when working
Support continuous over 360 degrees movement for both
Pitch and roll
, can be set up in any aircraft indeed.
Check price and availability
Found 11 years, 3 months ago