ReadyMadeRC
RMRC Anaconda - PNP (with installed Motor, ESC, and Servos)
Wingspan | 2,060mm |
Wing Area | Approx. 4,900cm |
Length | 1,410mm |
Motor | RMRC Tiger Motor Brushless Outrunner AT3520-5, 800kv (6mm prop adapter shaft) |
Propeller (sold separately) | Recommend |
ESC | RMRC Tiger Motor 80A ESC with switch mode BEC (T-Plug connector) |
Servos | 3x 30g and 2x 17g Metal Gear Digital (does not include 2x servos for flaps) |
Recommended Flap servos | HS-81 |
Battery | Li-Po 4s 5,000mAH - 20,000mAH (Additional nose weight needed with smaller batteries) |
Center of Gravity | 1/3 of wing from leading edge on the main spar |
Approximate flight duration | 45 minutes to over an hour depending on configuration |
Fuselage dimensions (Inside) | L 66cm (26.5") x W 15cm (6") x H 8cm (3") |
Features:, , Specifications:, , RMRC's Setup for the Anaconda:, , RcGroups.com Unboxing Video with Jim Graham:, , Looking inside the fuselage:, , Notes:, , Can be broken down for transport:, Picture courtesy of ducatirdr from RCGroups.com,
Anaconda PNP - with installed Motor, ESC, and Servos
After months of testing,
we are proud to introduce the RMRC Anaconda! The wait is finally over for this highly anticipated air frame. The Anaconda features a twin boom, inverted-V tail pusher design, with FPV flying and amateur aerial photography being its main purpose. It has been described as a "pilot's air frame", meaning that while it maintains excellent stall characteristics, it does not self correct while in a turn. When paired with the Vector OSD and stabilizer, this is the ultimate combination.
We pulled out all of the stops
with the Anaconda to make sure to offer the quality product that you have come to expect from RMRC. It was our main objective from the start to offer you the best product possible. From the high quality hardware and control horns, the ultra smooth foam with minimal mould flashing, and graphics designed by the artist known as Chicken Sashimi, we know you will be proud to fly this new air frame.
Easy to tear down for travel!
Modular nose camera bay (We can supply drawings for others to make camera pods!)
Adjustable center of gravity tray (no need to move batteries themselves)
Ample room in the fuselage for equipment with easy access to all areas.
Allows for a gimbal to be mounted under the nose for a clear view
Optional flaps - Both leading and trailing edge for stable slow flight performance
(hardware and servos not included for flaps)
Strong landing gear with steerable nose wheel
Optional mounting positions for GPS and/or transmitter on tail booms
Premium custom RMRC branded Tiger Motor and ESC included with PNP version
2
/
HS-85
Maximum measurements
*AUW - Bare PNP Version Weigh
s ~5.25lbs
out of the box
Stock PNP Electronics
2x RMRC 5100 4s batteries wired in parallel
Eagle Tree Vector flight controller
Feiyu-Tech 3-Axis Gimbal with adapter
Nose mounted Pro-700N Camera
APC 15.5x4E Prop
HS-85 Servos for Flaps
Anaconda User Manual found
HERE
Important Notice!
When un-boxing your Anaconda, please check that stereo jacks are glued securely in their housings. We have found a few that were loose as shown below.
(9/15/14)
The Anaconda is
not
intended for beginners since it does not have self correcting tendencies. Instead, we recommend that beginners start with more gentle airframes such as the Penguin.
Not intended to be a "belly lander" due to size of prop and camera mounts
Not designed for hand launching
Includes Green Decal Sheet
RcGroups.com
REVIEW
Shipping Size - 43x15x13
Check price and availability
Found 7 years, 8 months ago