Skip to content
Discountinued

ReadyMadeRC

Super Sky Surfer 2000 Adjustable Motor Mount


Position 1stock height up to a 9" prop.
Position 2(+) 0.47" for up to a 10" prop.
Position 3(+) .95" for up to an 11" prop.
Position 4(+) 1.42" for up to a 12" prop.
Total Weight41g

Three step installation:, Install base tube into the plastic nacelle and secure in place with the 4 socket head screws (allen wrench included), Included:, 1 - SSS 2000 Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws,  4 base tube socket head screws, 1 allen wrench., Notes:, The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Acceptable bolt patterns (units in mm):, 19x19,

This two piece mount is CNC machined from billet aluminum.  It is designed to adapt a large range of 35mm and 42mm diameter outrunner motors to the X-UAV
Super Sky Surfer 2000
.  It will allow for four different motor mounting heights to accommodate propeller sizes up to 13" in diameter.

With this setup you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quiet platform.

Swapping motors from a 35mm outrunner with a 9" prop to a 42mm outrunner with a 12" prop can easily be done by removing a few screws.  There are a large number of motor / propeller combinations possible with this setup.  This is ideal for those looking to achieve the best performance possible for their FPV platform.

Attach new motor to motor plate with supplied flat head screws.

Attach motor plate to motor base tube at desired height with suppled pan head screws.

Center of Gravity should always be checked and adjusted per the user manual after installation of a new motor.

Compatible Motors

35mm Outrunners

42mm Outrunners

Due to the large variety of compatible motors Please verify motor size and KV will suite flying style

19x25

25x25

25x30

30x30


Check price and availability


Found 11 years, 5 months ago



Related Products


Wing Set for Sky Surfer 1400

View
Wing Set for Sky Surfer 1400

Horizontal Stabilizer for Sky Surfer 1400

View
Horizontal Stabilizer for Sky Surfer 1400

Fuselage for Sky Surfer 1400

View
Fuselage for Sky Surfer 1400

ESC for Sky Surfer 1.4m

View
ESC for Sky Surfer 1.4m

Decals for Sky Surfer 1.4m

View
Decals for Sky Surfer 1.4m
BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby