ReadyMadeRC
Zeiss Cinemizer HD Glasses + DJI Lightbridge 2.4 HD Video COMBO
DC power input | 11-26V |
Power consumption | 6W (without external USB equipment) Power consumption |
DC power input | 11-26V |
Power consumption | 8W (during normal use) |
Ground unit | 125mm x 89mm x 20mm, |
Air Unit | 67mm x 47mm x 20mm |
Ground unit | 360g, |
Air unit | 70g |
24 Bit RGB color depth- FoV (Field of View) | 30° |
HDMI | 720p, 1080p and 3D (Frame Packing) |
AV-In | 3,5mm / 4pin jack for audio & video (PAL/NTSC) |
Battery-Box | 60 g, HDMI-Adapter 30 g |
Features:, 2.4G Full HD Digital Video Downlink, -Support for two remote controls: one for flight control (10 Channels) and the other for gimbal control(6 Channels). Control signals are received in the air and then transmitted to the flight controller through D-BUS., Specifications:, , It's Time to Upgrade:, It's time to move up to the most advanced and highest quality video glasses available for FPV! With features not seen in other popular FPV goggles such as diopter adjustment (for individuals that wear glasses), ear slider for comfort, and high resolution OLED displays, these are sure to be the new favorite for FPV'ers everywhere!, Display adjustments including:, , Aspect ratio 16:9,
Zeiss and DJI have joined forces to give you the ultimate HD experience in one package!
This combo also includes the Cinemizer FPV sun shield for free!
2.4G Full HD Digital Video Downlink
DJI is announcing DJI Lightbridge, 2.4G Full HD Digital Video Downlink. DJI Lightbridge is an all new revolutionary2.4G Full HD digital video downlink. DJI Lightbridge offers extremely powerful equipment packed into a small and light-weight form factor. By offering 1920 x 1080p@30fps video data transmission from up to 1.7km (1.05miles) away, it's the ideal solution for the professional aerial photographer and FPV users. Set yourself free and remove the limits from low definition analog video transmitters.
-1920x1080 @60fps input and 1920x1080 @30fps output
Extreme Long Distance Transmission
-Less than100mWground unit transmission in full compliance with CE and FCC certification
-5dBi omni-directional antenna offers an enormous distance of up to1.7 km (1.05 miles)
-Optional 14dBipatchantenna boosts transmission distance tremendously to 5km (3.1 miles)
Multiple Input And Output Connections
-AV input
-HDMI input
-DJI Zenmuse gimbal input (Digital Video/Power Supply/OSD Data)
-HDMI HD image output
-USB 2.0 image data output for iOS and Android phones and tablet synchronization
Built-in Remote Control Link
-Uplink remote control transmission and downlink video work simultaneously on2.4GHz.
-Remote control data travels to the uplink via the TX-Thru Port at the same time that video is streamed back down all without interference.
-When used with a non-2.4G radio transmitter, video only transmission operation is supported. The DJI 5.8G radio transmitter is recommended.
Strong Anti-Jamming Technology
-Frequency Hopping Spread Spectrum (FHSS) + Direct Sequence Spread System (DSSS)
technology is used for uplink transmission to enhance stability and offer anti-jamming capability.
-MIMO multi-antenna technology and OFDM modulation methods along with advanced algorithms are utilized for downlink transmission to enhance data bandwidth, improving dynamic performance and increasing stability even in harsh environments.
-Channel interference is constantly monitored during downlink transmission with automatic switching between 8 channels for the best possible signal.
-Up to 8 downlinks can be connected for parallel streaming and work independently without interference.
Low Latency Transmission
Maximum latency of up to 80ms
Built-in OSD On-Screen Display) Function
-No additional equipment required for OSD functions when used with A2/WooKong-M/Naza-M V2 flight controllers. Flight parameters will be displayed onscreen.
-OSD functionality can be turned off via mobile software for HDMI and iOS/Android Output.
Works With DJI Multi-Rotor Flight Controllers
-DJI A2, WooKong-M and Naza-M V2 flight controllers
-Phantom 2, with DJI 5.8G radio transmitter.
Multi-device Operation Mode, Stable And Reliable
-A single air unit can transmit to multiple ground units sending video to multiple screens. (Only one of the ground units can send a control signal while additional ground units will only be able to receive a video signal)
-Encryption ensures only authorized devices can receive data which can be programmed via mobile device software.
Built-in High Capacity Battery
-Ground unit has a built in high capacity 4000mA battery offering up to 4.5hours of use per charge.
-Rechargeable through the supplied charger or via a3S~6S Li-Po power battery. A full charge takes approximately1.5 hours.
-LED battery level indicator
-Also functions as a USB charger for mobile devices prolonging the life of peripheral equipment.
Electromagnetic Interference Shielded Structural Design
-Aluminum alloy casing
-Extreme internal and external shielding for interference protection.
Video Input
HDMI, AV, DVSB(For DJI Gimbals)
Supported
Formats(HDMI)
720p50, 720p60, 1080i50, 1080i60, 1080p25, 1080p30,
1080P50, 1080P60
Supported Formats(AV)
PAL25, NTSC30
Radio Frequency
2.405-2.4835GHz, FCC/CE certified
Interface (Ground Unit)
LED indicator Power switch Charging interface USB 2.0
HDMI
Remote control input (supports two controllers)
Interface (Air Unit)
LED indicator
DBUS HDMI AV
Gimbal Port
Frequency switching button
External Case
Aluminum alloy
Power supply
(Ground Unit)
Built-in lithium battery
Power supply (Air Unit)
Dimensions
Weight
Zeiss Cinemizer OLED Video Glasses
Since a sun-shield is critical for FPV use, all Cinemizer goggles we sell include a
FREE
SUN SHIELD
at no additional cost. That's a $39 value at no additional cost to you! You don't even need to add it to your order, it's already included when you purchase the goggles.
The lightweight and compact Cinemizer OLED is packed with engineering marvels that make it the most comfortable, durable and stylish multimedia eyewear on the market.
The Cinemizer features optical adjustments for each eye that allow you to adjust your view of the High Definition OLED displays so that the image quality is perfect!
Lightweight, comfortable design
High Definition OLED displays
Ear slider
Folding arms for easy storage
Rechargeable Lithium Ion battery
Carrying case
Interchangeable ear buds
Manual adjustment option for 3D input
Volume control
3.5 mm input for headphones
Independent optical adjustments
3D left/right, top/bottom, interleaved
Aspect ratio
Color/contrast
Independent image placement
Technical Details
Image
OLED displays (Organic Light Emitting Diode)
Simulated screen of 40 inch (=1 m) in 2m distance
2 x High resolution displays with 870 x 500 pixel each
3D Support
Side-by-side / Top-Bottom / Line interleaved
Frame Packing via HDMI (720p / 1080p)
Diopter Setting
Continuous prescription setting of -5 to +2 D for each eye
Interpupillary distance (IPD)
The optics supports an IPD range of 59 – 69mm
Input Sources
Video capable iPod & iPhone models via optional accessory
External Connectors
Mini-USB for charging the integrated re-chargeable battery
3,5mm audio jack for external stereo head phones
Light Source
LED-Class 1
Power Supply
Built-in rechargeable lithium-ion battery
Charging via USB; 5 V / 450 mA
Battery life up to 6 hours when fully charged
Charging time 2.5 hours
Weight
Weight on your nose approx. 75 g
Video glasses approx. 120 g
Delivery package approx. 800 g
Ambient Conditions
Operation at 5 °C to 35 °C
Storage and transport at –20 °C to 45 °C
Humidity 10–80%, non-condensing
Delivery Package
Cinemizer OLED incl. re-chargeable battery
Cinemizer HDMI Adapter
Nose pad plus 2 nose pad adapter
USB-Cable
AV-video-cable (3,5mm 4pin to 3 x Cinch)
Quick Guide and safety handling
Earbuds
Travel case
HDMI to Mini-HDMI Adapter-Cable
Retail Package Dimensions
230mm x 180mm x 80mm (WxHxD)
iPhone and iPod are trademarks of Apple Inc. registered in the U.S. and other countries. “Made for iPod,” and “Made for iPhone,” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC in the United States and other countries. cinemizer® is a registered trademark of Carl Zeiss. cinemizer is designed by Carl Zeiss in Germany.
Check price and availability
Found 10 years ago