Skip to content

SDSHobby

PITTS MODEL 12 EPO/ FOAM ELECTRIC AIRPLANE ARF BRUSHLESS VERSION-RED COLOR

Specification:, , Wing Span:, 1067mm(42in), Overall Length:, 1130mm(44.5in), Wing Loading:, 43g/sq.dm, Servo:, 9g*2pcs,, Speed Controller:, 50A, Motor:, , Flying Weight:, , Material:, , Color:, , CTN Size:, , Recommended equipments (need to buy separately):, , Battery:, 14.8V 2200mAh 25C,

17g*2pcs BM3720A-KV650 1300g(45.9oz) EPO Red Carbon Fiber Roll Tube s ...

SDSHobby

POSITIVE AND IN REVERSE PROPELLERS 8*4.5IN FOR SMQ QUADROTOR/ X4-FLYER/ FOUR ROTOR HELICOPTER OR MULTI-AXIS FLYER

Diameter8in/ 203.2mm
Pitch4.5in/ 114.3mm
Center Aperture DimensionD5 (diameter can be changed by revising the ring group)
Recommended Motor1200-1500KV
Suitable for Shaft Range550-700mm
Positive Propellers1pcs
In Reverse Propeller1pcs

Specifications:, Includes:,

Rings Group*2 set

SDSHobby

POSITIVE AND IN REVERSE PROPELLERS 12*4.5IN FOR SMQ QUADROTOR/ X4-FLYER/ FOUR ROTOR HELICOPTER OR MULTI-AXIS FLYER

Diameter12in/ 304.8mm
Pitch4.5in/ 114.3mm
Center Aperture DimensionD6*H9.7mm (diameter can be changed by revising the ring group)
Recommended Motor700-900KV
Suitable for Shaft Range550-700mm
Positive Propellers1pcs
In Reverse Propeller1pcs

Specifications:, Includes:,

Rings Group*2 set

SDSHobby

PIRANHA 400 ELECTRIC BRUSHLESS RC BOAT FIBERGLASS WITH 2040 KV2604 MOTOR WITH WATER COOLING+30A ESC WITH BEC

Specifications:, Speed:, 40 km/h, Hull Size :, 400*100*65mm, Hull Material:, Fiberglass, Hull Weight:, 380g, Power:, Brushless 2040 motor KV2604 with water cooling, 30A ESC with BEC, Prop:, , Drive System:, Collect 2.3*3.18mm, Drive dog 3.18mm, Flexible axle 3.17mm, Rudder:, length=43mm Height=75mm, Hull Design:, Racing boat, Recommended Equipments (need to buy separately):, Battery:, 7.4V 2200mAh 20C Li Po, Remote Control:, CH-3CH radio (such as FS-GT3B, FS-GT2 & FS-GT3C),

35copper prop with 35mm diameter, 4mm aperture Including Servo

SDSHobby

PIRANHA 600 ELECTRIC BRUSHLESS RC RACING BOAT FIBERGLASS WITH 2858 KV2881 MOTOR WITH WATER COOLING+50A ESC WITH BEC

Speed50 km/h
Hull Size615*155*85mm
Hull Materialfiberglass
Hull Weight850g
PowerBrushless 2858 motor KV2881 with water cooling, 50A ESC with BEC
PropD35mm copper prop with 4mm aperture
Drive SystemCollect 3.18*4mm, 4mm Drive shaft, 4mm Drive dog, 4mm Flexible axle
Rudder75 rudder with length=43mm, height=75mm
Hull DesignRacing boat
Battery11.1V 4000mah Lipo
Remote Control2CH-3CH radio (such as FS-GT3B, FS-GT2 & FS-GT3C)

Specifications:, Recommended Equipments (need to buy separately):,

NOT Including Servo and Radio Control

SDSHobby

PRINCESS ELECTRIC BRUSHLESS RC BOAT FIBERGLASS WITH 3650 KV1500 MOTOR WITH WATER COOLING 120A ESC (W/O RADIO SYSTEM)

length=43mm High=75mm (No502B18)

Specifications:, Speed:, 45km/h, Hull Length:, 970mm, Hull width:, 300mm, Hull depth:, 00mm, Hull Material:, , Hull Weight:, 1540g, Power System:, 3660 Brushless motor KV1660 with water cooling,, Prop:, , Drive System:, 5*4mm collect, 4mm flexible shaft, 4mm drive shaft, 4mm drive dog, Rudder:, Hull Design:, Yacht boat, Recommended Equipments (need to buy separately):, Radio System:, -3 channels (such as FS-GT2, FS-GT3B, FS-GT3C), Battery:, 14.8V,

fiberglass 120A ESC 08 aluminum prop with 48mm diameter, 4.76mm ...

SDSHobby

ROCKET ELECTRIC BRUSHLESS RC BOAT FIBERGLASS WITH 3660 MOTOR AND WATER-COOLING ESC 120A (HIGH SPEED)

Speed50~60km/h (for Standard Equipments)
Speed80~100km/h (for Converted Equipments)
Weight1300g
MotorBrushless 3660
ESCwater-cooling ESC 120A
PropellerD38 plastic propeller
Hull Materialimported glaze, fiberglass.
Hull Colorwhite & red, yellow & black, white & blue, yellow & blue, etc.
Hull Size810mm (L)*240mm (W)*150mm (H)
RudderCNC aluminum alloy 95mm bibulous rudder.
Other Accessoriesaluminum alloy water outlet, antenna set, compartment aluminum ring, stainless steel push rod.
Color Box Dimension990mm*320mm*220mm
Servo1pcs*4.1kg, more details please click our item No.
Battery14.8V 4400mAh (Li-Po)

Specifications:, Shaft & Accessories: copper shaft housing, 4mm soft shaft, tough drive shaft, CNC aluminum alloy shaft bracket and tight connector., Recommended Equipments (need to buy separately):, Radio Control System Not included, suggest using 3-channel Pistol Transmitter, our item No.,

TBL1001 or TBL1002 S3003

SDSHobby

RED & BLUE & WHITE WM EDGE 540 EPP SERIES RC MODEL ELECTRIC AIRPLANE ARF

Servo1.5-2kg/cm;0.1-0.18sec; 9-12g(4pcs)

Specifications:, Wing Span:, 955mm, Length:, 945mm, Wing Area:, 15.2dm, Weight:, 480g (without battery), Features:, Requirements for Ready to Fly Set (need to buy separately):, Motor:, 834, ESC:, 18-30A, Battery:, 3S 11.1V 1000-1300MAH Li-po, Prop:, 10*4.7/11*4.7,

The product is mainly made of EPP material, light-weight and ...

SDSHobby

SCREWS KITS FOR IDEAFLY IFLY-4 QUADCOPTER/ FOUR-AXIS FLYER

Application:, for IDEAFLY IFLY-4 Quadcopter/ Four-axis Flyer,

SDSHobby

SINGLE-AXIS SHOCK ABSORPTION CAMERA GIMBAL FOR BUMBLEBEE ST550

Support for pitch and roll two-axis rotationthe pitch angle

Features:, Total weight:, 100g (include servo), 45, the roll angle:±, Maximum payload:, 110mmx75mm (, Application:, Suitable for Bumblebee ST550 RC quadcopter,

It is made by 1.2mm of carbon fiber board and ...

SDSHobby

ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (PLASTIC TRIPOD) + PLASTIC PROP

Empty Frame Weight900g
Flying Weight1200g
Payload Capability200-500g
Maximum Gross Take-Off Weight1700g
Flight TimeOver 10min
Wheelbase550mm
Height306mm
Length of After Fold784mm
Height of After Fold100mm
Carton Size (L*W*H)415mm *230mm* 80mm
Plastic Prop10*3.8(2pcs), 10*3.8P(2pcs)
Motor2812 brushless motor, KV910, 4pcs
High Speed Brushless ESC20A, 4pcs
Radio Control Systemtransmitter 6 channels or more, receiver 6 channels or more
Battery11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity>20C)

Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Controller*1pcs, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,

Bumblebee Frame*1pcs(Plastic Tripod)

SDSHobby

ST550 BUMBLEBEE FOUR-AXIS FLYER/QUADCOPTER KIT WITH FRAME (CARBON FIBER TRIPOD) +PLASTIC PROP

Empty Frame Weight900g
Flying Weight1200g
Payload Capability200-500g
Maximum Gross Take-Off Weight1700g
Flight TimeOver 10min
Wheelbase550mm
Height306mm
Length of After Fold784mm
Height of After Fold100mm
Carton Size (L*W*H)415mm *230mm* 80mm
Plastic Prop10*3.8(2pcs), 10*3.8P(2pcs)
Motor2812 brushless motor, KV910, 4pcs
High Speed Brushless ESC20A, 4pcs
Radio Control Systemtransmitter 6 channels or more, receiver 6 channels or more
Battery11.1V 3S 2200-5500mAh Li-Po battery (Burst Discharge Capacity >20C)

Performance Parameters:, Including the Following Equipments:, Recommended Equipments for Ready to Fly (need to buy separately):, Kindly Remark:, There are 6 different types for Bumblebee ST550 Quadcopter as follows:,

Bumblebee Frame*1pcs(Carbon Fiber Tripod) Controller*1pcs

SDSHobby

UPPER RACK/UPPER MOUNT PLATE FOR IDEAFLY IFLY-4 QUADCOPTER/ FOUR-AXIS FLYER

Brand:, IDEAFLY, Features:, , Material:, engineering plastic of military equipments, strong shock resistance., Application:, used for IDEAFLY IFLY-4 Quadcopter/ Four-axis Flyer,

SDSHobby

V-LEOPARD LBP4274-2.5Y KV2000 4 POLES INRUNNER BRUSHLESS MOTOR FOR RC CAR

KV (RPM/V)2000
Weight (g)374
Max Power (W)2600
Max Current(A)120
Resistance (ohm)0.0062
No-load Current(7.4V)1.7A
Li-Po Battery3-6S

Specification:, , Motor Diameter (mm): 42, Motor Length (mm): 74, Extended Shaft Length (mm): 20, Extended Shaft Diameter (mm): 5, Banana Plug Diameter(mm): 4, Installation Hole Depth(mm): 7, Max Voltage(V): 25, Features:, , Recommended Equipments (need to buy separately):,

The whole efficiency can reach up to over 90%, and ...

SDSHobby

WM MX2 HEPP RC MODEL AEROBATICS ELECTRIC AIRPLANE ARF TYPE B

Wingspan955mm
Length945mm
Wing Area15.2dm
Weight550g (without battery)
Motor2834;2215; 2217;950-1100KV Brushless outrunner
ESC25-30A
Battery3S 11.1V 1100-1300MAH Li-Po
Prop10*4.7/11*4.7
Servo1.5-2kg/cm, 0.1-0.18sec, 9-12g(4pcs)

Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,

The revolutionary design adds to the structural intensity and the ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby