SDSHobby
HOBBYWING PENTIUM V4 VERSION 10A BRUSHLESS ESC FOR IFLY-4 QUADCOPTER/ RC AIRPLANE
| Cont. Current | 10A |
| Burst Current (>10s) | 12A |
| BEC Model | Linear |
| BEC Output | 5V/1A |
| Cells of Li-Po | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Net Weight | 9.4g |
| L*W*H (Size) | 38*18*6mm |
| Application Fields | model airplanes and helicopters |
| Safety arming feature | Regardless of the throttle stick position, the motor will not spin after battery connected. |
| Throttle calibration function | Throttle range can be calibrated to be compatible with different transmitters. |
| Multiple program methods supported | transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. |
| Full protection | Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. |
| Size | 92mm (L) * 52mm (W) * 6mm (H). |
| Weight | 26g. |
| Input Voltage | 4.8-6V |
Specifications:, Equipped LED Program Card (Need to Buy Separately):, The program card is NOT included, any interest please glance over the following information on the, Application Fields (only for hobby wing’s ESC):, Fly Fun (also called "Fentium"), Specification:, Kindly Remark:, This program card is NOT suitable for Platinum series airplane ESC., Programmable Item:,
Features : User can use the program card to program ...SDSHobby
EZRUN-150A-SD BRUSHLESS ESC FOR 1/5 CAR (COMPETITION RACE)
| Model | EZRUN-150A-SD Brushless ESC for 1/5 Car (Competition Race) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 150A, burst current 1080A. |
| 1.2 Input | 6-18 cells NiMH/NiCd or 2-6 cells LiPo. |
| 1.3 BEC Output | 5.75V/3A (Switch mode built-in BEC). |
| 1.4 Resistance | 0.0002 Ohm. |
| 1.5 Motor Supported | Sensorless and sensored brushless motors |
| 1.6 Suitable Brushless Motor | 6T and > 6T |
| 1.7 Suitable Car | 1/5 on-road or off-road cars / trucks for competitive race. |
| 1.8 Size | 68mm(L) * 55mm(W) * 45mm(H). |
| 1.9 Weight | 150g(Without wires) |
| 1.7 Multiple protection features | Low voltage cut-off protection / Over-heat protection |
SDSHobby
EZRUN-60A-SL BRUSHLESS ESC FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| Model | EZRUN-60A-SL Brushless ESC for 1/12 and 1/10 Cars (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 60A, burst current 380A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.0007 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥5.5T, Off-Road≥8.5T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥8.5T, Off-Road≥13T; |
| 1.7 Suitable Car | 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| 1.9 Weight | 32g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and |
| .8 Multiple protection features | Low voltage cut-off protection for lithium or nickel |
1.6 Suitable Brushless Motor:,
1 Specification Features.1 Compatible with all sonsorless brushless motor..2 Use ...SDSHobby
EZRUN-35A-SL BRUSHLESS ESC FOR 1/12 AND 1/10 CARS (VERSION 2.0)
| Model | EZRUN-35A-SL Brushless ESC for 1/12 and 1/10 Cars (Version 2.0) |
| Manual | User Manual |
| Accessory | Program Card for Car ESC |
| 1.1 Output | Continuous current 35A, burst current 190A. |
| 1.2 Input | 4-9 cells NiMH/NiCd or 2-3 cells LiPo. |
| 1.3 BEC Output | 6V/1.5A. |
| 1.4 Resistance | 0.0015 Ohm. |
| 1.5 Motor Supported | Sensorless Brushless Motor |
| With 4-6 cells NiMH/NiCd or 2 cells Lipo | On-Road≥9T, Off-Road≥12T; |
| With 6-9 cells NiMH/NiCd or 3 cells Lipo | On-Road≥12T, Off-Road≥18T; |
| 1.7 Suitable Car | 1/12, 1/10 on-road or off-road cars / trucks for normal race or sportful race. |
| 1.8 Size | 31.5mm(L) * 27.5mm(W) * 24mm(H). |
| 1.9 Weight | 30g(Without wires) |
| .4 With 3 running modes | Racing mode (Forward), Forward/Backward mode and Rock |
| .8 Multiple protection features | Low voltage cut-off protection for lithium or battery /Over-heat |
1.6 Suitable Brushless Motor:,
1 Specification Features.1 Compatible with all sonsorless brushless motor..2 Use ...SDSHobby
NEW STYLE RC EAGLE KITE READY TO FLY (RIGHT HAND THROTTLE)
| Wingspan | 2060mm |
| Length | 740mm |
| Flying weight | Approximately 645g |
| Propeller | 7x6E |
| Control distance | 500m-800m |
| Fuselage & wings | Bamboo wood & Textile |
| Motor | 2212,1400rpm/v brushless motor |
| Li-poly Battery | 11.1V 1250mAh 10C |
| Servo | 9g plastic gear servo x3pcs |
| Radio system | Mode 1 right hand throttle |
| ESC | 18A ESC |
| Charger | 2S-3S balance charger with adapter |
| Package | Brown Carton |
Specifications:, Wing area: 93, Features:, NOTE:,
d m2 40/72MHz 4ch transmitter with FM 5ch receiver Nice ...SDSHobby
NEW STYLE RC EAGLE KITE ALMOST READY TO FLY (NOT INCLUDING THE REMOTE CONTROL AND BATTERY)
| Wingspan | 2060mm |
| Length | 740mm |
| Flying weight | Approximately 645g |
| Propeller | 7x6E |
| Control distance | 500m-800m |
| Fuselage & wings | Bamboo wood & Textile |
| Motor | 2212,1400rpm/v brushless motor |
| Servo | 9g plastic gear servo x3pcs |
| ESC | 18A ESC |
| Charger | 2S-3S balance charger with adapter |
| Package | Brown Carton |
Specifications:, Wing area: 93, Features:, NOTE:,
d m2 Nice appearance. High scale appearance and beautiful painting ...SDSHobby
NEW STYLE RC EAGLE KITE READY TO FLY (LEFT HAND THROTTLE)
| Wingspan | 2060mm |
| Length | 740mm |
| Flying weight | Approximately 645g |
| Propeller | 7x6E |
| Control distance | 500m-800m |
| Fuselage & wings | Bamboo wood & Textile |
| Motor | 2212,1400rpm/v brushless motor |
| Li-poly Battery | 11.1V 1250mAh 10C |
| Servo | 9g plastic gear servo x3pcs |
| Radio system | Mode 2 left hand throttle |
| ESC | 18A ESC |
| Charger | 2S-3S balance charger with adapter |
| Package | Brown Carton |
Specifications:, Wing area: 93, Features:, NOTE:,
d m2 40/72MHz 4ch transmitter with FM 5ch receiver Nice ...SDSHobby
HORNET BRUSHLESS ESC-100A FOR HELICOPTER
| Max. Current | 100A |
| Max. Voltage | 7.4-22.2V (Lipo) |
| Cont. Current | 100A@25 |
| Burst Current (>10s) | 120A@25 |
| BEC Model | Switch |
| BEC Output | 5.7V/ 3A |
| Cells of Li-Po | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 6S-20S |
| User Programmable | yes |
| Net Weight | 59g |
| L*W*H (Size) | 70* 26.8* 23mm |
Specifications:, Features:, Kindly Remark:,
℃ ℃ This product is incorporates the latest SMT hardware ...SDSHobby
HORNET BRUSHLESS ESC-80A FOR HELICOPTER
| Max. Current | 80A |
| Max. Voltage | 7.4-22.2V (Lipo) |
| Cont. Current | 80A@25°C |
| Burst Current (>10s) | 96A@25°C |
| BEC Model | Switch |
| BEC Output | 5.7V/ 3A |
| Cells of Li-Po | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 6S-20S |
| User Programmable | yes |
| Net Weight | 47g |
| L*W*H (Size) | 70* 26.8* 23mm |
Specifications:, , Features:, This product is incorporates the latest SMT hardware technological developments., Kindly Remark:, Even if programming sequences of Hornet Speed Controllers are particularly logical and therefore very easy, using and operating requires some knowledge and a few basic skills. Please read through instructions entirely before attempting to operate with these electronic devices.,
HORNET controllers also have the most intelligent, comprehensive software, which ...SDSHobby
HORNET BRUSHLESS ESC-60A FOR HELICOPTER
| Max. Current | 60A |
| Max. Voltage | 7.4-22.2V (Lipo) |
| Cont. Current | 60A@25°C |
| Burst Current (>10s) | 72A@25°C |
| BEC Model | Switch |
| BEC Output | 5.7V/ 3A |
| Cells of Li-Po | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 6S-20S |
| User Programmable | yes |
| Net Weight | 45g |
| L*W*H (Size) | 70* 26.8* 23mm |
Specifications:, , Features:, This product is incorporates the latest SMT hardware technological developments., Kindly Remark:, Even if programming sequences of Hornet Speed Controllers are particularly logical and therefore very easy, using and operating requires some knowledge and a few basic skills. Please read through instructions entirely before attempting to operate with these electronic devices.,
HORNET controllers also have the most intelligent, comprehensive software, which ...SDSHobby
INNOVA 700 ELECTRIC FLYBARLESS HELICOPTER ARF+EBAR
| 7. Available Colors | red and blue, color will be sent randomly. |
| 8. Length | 1328mm |
| 9. Height | 408mm |
| 10. Main Rotor | 690mm |
| 11.Tail Blade | 105mm |
| 12. Motor Pinion | 12T |
| 13. Main Gear | 115T |
| 14. Tail Drive gear | 42T |
| 16. Gear Ratio | 9.6 |
| 17. Weight (w/o power) | 2500g |
Product Description:, 1. High strength aluminum parts with sand blasting anodizing procedure features elegant appearance., Specification:, 1. Metal spare parts, 15. Tail Gear: 9T,
. Brand new flybarless main rotor head. The configuration of ...SDSHobby
INNOVA 700 ELECTRIC FLYBARLESS HELICOPTER ARF
| 7. Length | 1328mm |
| 8. Height | 408mm |
| 9. Main Rotor | 690mm |
| 10. Tail Blade | 105mm |
| 11. Motor Pinion | 12T |
| 12. Main Gear | 115T |
| 13. Tail Drive gear | 42T |
| 15. Gear Ratio | 9.6 |
| 16. Weight (w/o power) | 2500g |
| 17. Available Colors | red and blue, colors will be sent randomly. |
Product Description:, 1. High strength aluminum parts with sand blasting anodizing procedure features elegant appearance., Specification:, 1. Metal spare parts, 14. Tail Gear: 9T,
. Brand new flybarless main rotor head. The configuration of ...SDSHobby
INNOVA 600 ELECTRIC FLYBARLESS HELICOPTER ARF+ EBAR
| 8. Length | 1280mm |
| 9. Height | 385mm |
| 10. Main Rotor | 610mm |
| 11. Tail Blade | 95mm |
| 12. Motor Pinion | 12T |
| 13. Main Gear | 115T |
| 14. Tail Drive gear | 42T |
| 16. Gear Ratio | 9.6 |
| 17. Weight (w/o power) | 2250g |
| 18. Available Colors | blue and red, colors will be sent randomly. |
Specification:, 1. Metal spare parts, 15. Tail Gear: 9T,
Product Descriptionï1⁄4š 1. High strength aluminum parts with sand blasting ...SDSHobby
INNOVA 600 ELECTRIC FLYBARLESS HELICOPTER ARF
| 7. Length | 1280mm |
| 8. Height | 385mm |
| 9. Main Rotor | 610mm |
| 10. Tail Blade | 95mm |
| 11. Motor Pinion | 12T |
| 12. Main Gear | 115T |
| 13. Tail Drive gear | 42T |
| 15. Gear Ratio | 9.6 |
| 16. Weight (w/o power) | 2250g |
| 17. Available Colors | blue and red, colors will be sent randomly. |
Product Description:, 1. High strength aluminum parts with sand blasting anodizing procedure features elegant appearance., Specification:, 1. Metal spare parts, 14. Tail Gear: 9T,
. Brand new flybarless main rotor head. The configuration of ...SDSHobby
SKYRC WATT METER DC 7.4-60V FOR CURRENT, VOLTAGE, POWER, TEMPERATURE
With watt meter function, it is now easy to determine things like:, •Current through an ESC and motor,
FEATURES •Measures energy (Wh), charge (Ah), power (W), current (A) ...