ngHobbies
HITECH HS-125MG SLIM WING SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed:, 0.17 / 0.13 sec @ 60 deg., Torque:, 41.66 / 48.6 oz.in (4.8v/6v), Size:, 1.18" x 0.39" x 1.33", Weight:, 0.84oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The analog HS-125MG is truly a super thin servo measuring ...ngHobbies
TWINSTAR II ARF ELECTRIC RC PARKFLYER
Assembly goes quickly even for the novice. Most of the foam parts are interlocking and the servo locations are molded in for quick, accurate assembly. Two 6V Speed 400 motors with wiring harness and push on props are included in the airplane kit. Airplane is capable of simple aerobatics; loops and rolls are easily done. Good illustrated instructions. For 4 channels: Ailerons (2 servos), Elevator, Rudder and Throttle.,
56" wingspan, 42-3/4" long, 667 sq. in. wing area, 45 ...ngHobbies
HITECH HS-81 STANDARD MICRO SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, None, Speed:, 0.11 / 0.09 sec @ 60 deg., Torque:, 36.10 / 41.66 oz.in (4.8v/6v), Size:, 1.17" x 0.47" x 1.16", Weight:, 0.58oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
You get two choices with Hitec’s most popular servo the ...ngHobbies
HITECH HS-805BB MEGA GIANT SCALE SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed:, 0.19 / 0.14 sec @ 60 deg., Torque:, 274.96 / 343.01 oz.in (4.8v/6v), Size:, 2.59" x 1.18" x 2.26", Weight:, 5.36oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
Known as the “monster” servo the HS-805BB uses a heavy ...ngHobbies
HITECH HS-785HB WINCH SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Dual Ball Bearing, Speed:, 1.68 / 1.38 sec @ 60 deg., Torque:, 152.75 / 183.31 oz.in (4.8v/6v), Size:, 2.32" x 1.14" x 1.96", Weight:, 3.88oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The HS-785HB sail winch servo with it's large drum wheel ...ngHobbies
NGH V680AC
| There are different charging modes for all requirements | Charging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc. |
Features:, Input Voltage range:, DC: 11V-18V, AC: 110/240V, Charging current range:, 0.1A - 6A, Charge power limit:, Max. 80W, Discharge power limit:, 10W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-18cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-6 cell, Pb battery voltage:, 2-24V, Weight:, 640g, Dimensions:, 145x145x56mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor, USB,
The V680AC is a low cost high preformance Li-Po, Li-Ion, ...ngHobbies
NGH EV-815A
| There are different charging modes for all requirements | Charging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc. |
Features:, Input Voltage range:, 11V-18V, Charging current range:, 0.1A - 7A, Charge power limit:, Max. 150W, Discharge power limit:, 25W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-26cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-8 cell, Pb battery voltage:, 2-36V, Weight:, 510g, Dimensions:, 145x98x30mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor,
The EV-815A is a low cost high preformance Li-Po, Li-Ion, ...ngHobbies
HITECH HS-65MG HIGH TORQUE ULTRA MICRO SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.14 / 0.11 sec @ 60 deg., Torque:, 24.99 / 30.55 oz.in (4.8v/6v), Size:, 0.92" x 0.45" x 0.94", Weight:, 0.42oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
Considered one of the most powerful servos in the micro ...ngHobbies
HITECH HS-56HB DELUX FEATHER SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.12 / 0.10 sec @ 60 deg., Torque:, 13.88 / 16.66 oz.in (4.8v/6v), Size:, 0.88" x 0.45" x 0.94", Weight:, 0.37oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
The HS-56HB Feather Servo is the perfect choice for larger ...ngHobbies
HITECH HS-45HB PREMIUM FEATHER SERVO
Detailed Specifations:, Motor Type:, 3 Pole, Bearing Type:, Top Ball Bearing, Speed:, 0.14 / 0.12 sec @ 60 deg., Torque:, 13.88 / 16.66 oz.in (4.8v/6v), Size:, 0.92" x 0.38" x 0.88", Weight:, 0.28oz, Documentation:, Servo Manual:, Click here, Data sheet:, Click here, Hitec Servo Chart:, Click here,
Hitec’s HS-45HB offers the economy and durability of our other ...ngHobbies
GOPRO CAMERA MOUNT FOR MK HEXA/OKTO NO SERVOS
This GoPro Hero camera mount comes installed underneath, in the center of gravity of the Mikrokpter. It is also possible to install further to the front, so the wide angle of the GoPro will catch only minimal parts from the landing gear or the front outrigger. Installing it in such position we have achieved two important goals:, All motors work equally since nothing is off balance, Features:, Low cost, minimal parts. Pieces are CNC cut from 1.7mm G10/FR4, Package contains:, All necessary plates, screws, nuts and washers, Note:, Assembly required., Cables:, Do not forget to pick up a GoPro FPV cable from here:, GoPro Camera Cables, This GoPro Hero camera mount comes installed underneath, in the center of gravity of the Mikrokpter. It is also possible to install further to the front, so the wide angle of the GoPro will catch only minimal parts from the landing gear or the front outrigger. Installing it in such position we have achieved two important goals:, All motors work equally since nothing is off balance, Features:, Low cost, minimal parts. Pieces are CNC cut from 1.7mm G10/FR4, Package contains:, All necessary plates, screws, nuts and washers, Note:, Assembly required., Cables:, Do not forget to pick up a GoPro FPV cable from here:, GoPro Camera Cables, Demo Videos:, Outdoor testing - click here, Note:, This kit comes with a mounting plate which either replaces of can be sandwitched under the battery holding plate on Hexa and Optokopters. Additional mountig plates for Quads will be available soon., Assembly documentation:, Click here to open or download (2Mb),
New Generation Hobbies is proud to present this low cost ...ngHobbies
VECTOR FLIGHT CONTROLLER + OSD WITH DEANS
| • FIXED WING and MULTIROTOR Flight Controller with GPS modes and RTH ◦Fixed wing | Traditional fixed wing, Elevon, and V-tail planes |
| ◦ Multirotor | Tricopter, Quadcopter, and Hexacopter |
| • COMPATIBLE | PCM, SPPM and S.BUS receiver support, with 4 types of RSSI |
| • FLEXIBLE | fly with or without your FPV equipment |
| • REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| http | //www.rcgroups.com/forums/showthread.php?t=2032857 |
| http | //fpvlab.com/forums/showthread.php?22260-Vector-FPV-Controller-Everything-we-ve-all-dreamed-about |
| http | //eagletreesystems.com/Manuals/vector.pdf |
| http | //www.eagletreesystems.com/index.php?route=product/product&product_id=136 |
Years in the making, and built from the ground up with simplicity in mind, the Vector has everything we hobbyists have dreamed about for our recreational FPV models, in one small, lightweight easy to use product:, • SIMPLE to set up and operate "out of the box" for both fixed wing and multirotor, with no PC required, Join the online Vector discussion:, :, :,
• Built-in OSD with COLOR GRAPHICS! ◦OSD display is fully ...ngHobbies
VECTOR FLIGHT CONTROLLER + OSD WITH XT60
| • FIXED WING and MULTIROTOR Flight Controller with GPS modes and RTH ◦Fixed wing | Traditional fixed wing, Elevon, and V-tail planes |
| ◦ Multirotor | Tricopter, Quadcopter, and Hexacopter |
| • COMPATIBLE | PCM, SPPM and S.BUS receiver support, with 4 types of RSSI |
| • FLEXIBLE | fly with or without your FPV equipment |
| • REDUCED WIRING | innovative wire harness with power distribution simplifies hookup |
| http | //www.rcgroups.com/forums/showthread.php?t=2032857 |
| http | //fpvlab.com/forums/showthread.php?22260-Vector-FPV-Controller-Everything-we-ve-all-dreamed-about |
| http | //eagletreesystems.com/Manuals/vector.pdf |
| http | //www.eagletreesystems.com/index.php?route=product/product&product_id=136 |
Years in the making, and built from the ground up with simplicity in mind, the Vector has everything we hobbyists have dreamed about for our recreational FPV models, in one small, lightweight easy to use product:, • SIMPLE to set up and operate "out of the box" for both fixed wing and multirotor, with no PC required, Join the online Vector discussion:, :, :,
• Built-in OSD with COLOR GRAPHICS! ◦OSD display is fully ...ngHobbies
MICRO 120 DEGREE CMOS CAMERA (PAL)
| Sensor type | CMOS 4.75mm x 3.55mm |
| Resolution | 786x576 (PAL) |
| Signal processing | DSP |
| Lines | 520TVL |
| Sensitivity | 0.008Lux/F1.2 |
| Lens included | 0.5mm pinhole 120 degrees |
| S/N Ratio | 48db |
| Video out signal | Standard 1VPP/75ohm |
| Dimensions | 27.5mm (long) x 17 mm (diameter) |
| Weight | 8gr |
| Cable and conectors | Standard servo type connectors. |
| White | Video Out |
| Red | 5V in |
| Black | Ground |
Specifications:, Scanning type: 2:1 Interlaced, Power: 5V, Connection diagram:, Manual:, none,
This is a very small, cased CMOS FPV camera with ...ngHobbies
ARDUPILOT MEGA 2.0 FULLY ASSEMBLED SYSTEM
,
The ArduPilot Mega 2.0 is a complete open source autopilot ...