GetFPV
IFLIGHT GIMBAL MOTOR GBM3508-130T
| Weight | 78g |
| Motor Dimensions | 42x17mm |
| Stator Dimensions | 35x8mm |
| Copper wire(OD) | 0.21mm |
| Configuration | 12N14P |
| Resistance | 14.3 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 200-400grams |
GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
TIGER MOTORS 18AMP ESC
| Output | Continuous 18 amps, burst 22 amps up to 10 Seconds |
| Input Voltage | 2-4 cells Lipo battery or 5-12 cells NiCd/NIMh battery |
| BEC | 2A / 5V (Linear mode) |
| Max Speed | 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM |
| Size | 45mm (L) * 24mm (W) * 11mm (H) |
| Weight | 19g |
| Multiple protection features | Low-voltage cut-off protection / over-heat protection / throttle signal loss protection |
| 3 start modes | Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters. |
NOTE: The sticker placed on these ESCs incorrectly states 2-3 cell lipo compatible. However, the manufacturer has rated these for 2-4 cell lipo usage. We have done extensive testing on 4 cell and these ESCs perform great with 4 cell lipos. Some of these stickers also read "20 amps" instead of "18 amps".,
Details This is a high quality, 18amp ESC by Tiger ...GetFPV
MOTOR MOUNT KIT (6PCS)
Motor Mount Kit and Upgrade for version 1.0 kits to v1.1 and up of the kit. This upgrade includes 6 Delrin plates total: 4 regular motor mounts and 2 Yaw motor mounts. This kit only includes the Delrin plates and does not include motor mounting hardware. You can separately purchase the available outrunner mounting hardware to mount outrunners with 16mmx19mm M3 mounting threads. This motor mount upgrade enables you to mount HobbyKing AX-2213N, NX-4000, and DT-750 motors as well as regular outrunners. The hardware from your original v1.0 kit enables you to mount AX-2213, DT-750, or similar motors. The NX-4000 series motors require M2.5x20mm screws (not included), but you can use the black spacers included in the v1.0 kit.,
Details Motors and motor mounting hardware not included.GetFPV
IFLIGHT GIMBAL MOTOR GBM2208-80T
| Weight | 43g |
| Motor Dimensions | 28x22mm |
| Stator Dimensions | 22x8mm |
| Copper wire(OD) | 0.16mm |
| Configuration | 12N14P |
| Resistance | 14.6 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 100-200grams(GoPro size) |
GetFPV
IFLIGHT GIMBAL MOTOR GBM4008-150T
| Weight | 102g |
| Motor Dimensions | 50x17mm |
| Stator Dimensions | 40x8mm |
| Copper wire(OD) | 0.21mm |
| Configuration | 12N14P |
| Resistance | 16.3 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 400-800grams(Nex6 and Nex7 Size) |
GetFPV
TIGER GB4006-120 BRUSHLESS GIMBAL MOTOR
| Motor Dimensions | 44.35x22mm |
| Stator Bore | 19x25mm 4-M3 |
| Rotor Bore | 15x15mm 4-M2.5 |
| Wire Length | 330mm including JR plug |
| Camera range | 400-800grams(Nex6 and Nex7 Size) |
GetFPV
TIGER GB2208-80 BRUSHLESS GIMBAL MOTOR
| Motor Dimensions | 27.5x22.5mm |
| Stator Bore | 19x16mm 4-M3 |
| Rotor Bore | 12x12mm 4-M2 |
| Wire Length | 190mm including JR plug |
| Weight | 42g |
Camera range:, 100-200 grams (GoPro Size),
Details The GB2208-80 is a high quality gimbal motor by ...GetFPV
IFLIGHT GIMBAL MOTOR GBM2212-80T
| Weight | 55g |
| Motor Dimensions | 28x26mm |
| Stator Dimensions | 22x12mm |
| Copper wire(OD) | 0.16mm |
| Configuration | 12N14P |
| Resistance | 15.6 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | 16 and 19mm center to center |
| Top mounting holes | 12mm center to center |
| Camera range | 100-300grams(GoPro Size) |
GetFPV
IFLIGHT GIMBAL MOTOR GBM5208-150T
| Weight | 168g |
| Motor Dimensions | 63x25mm |
| Stator Dimensions | 52x8mm |
| Copper wire(OD) | 0.27mm |
| Configuration | 12N14P |
| Resistance | 10.2 ohms |
| Wind type and termination method | Star style |
| Bottom mounting holes | (3 holes) 32mm center to center,(4 holes)25mm center to center |
| Top mounting holes | (2 holes)12mm center to center,(3 holes)17mm center to center |
| Camera range | 600-1500g |
Flexible Mounting Holes:,
Details This GBM5208-150T is a very powerful gimbal motor capable ...GetFPV
TIGER MOTOR U8-16 100KV U-POWER PROFESSIONAL MOTOR
| No load current | .6A/22.2V |
| Max Watts/Time | 750W/180s |
| Max Amps/Time | 24A/180S |
| Resistance Ohm | 186m |
| Case Height/Length | 86.8x26.5mm |
| Weight | 240g |
| Recommended ESC | 30amp-40amp |
| Recommended Battery Configuration | 6-12s |
| Recommended CF Prop | (T-motor style) - 26-29" |
KV: 100kv,
Details The U8 series motor by Tiger Motors is the ...GetFPV
TIGER MOTOR MN3110-26 470KV
,
Details Designed specifically for multi-rotors, the Navigator Series from Tiger ...GetFPV
TIGER MOTOR MT-2212-13 980KV
,
Details The Tiger T-Motor MT series motors are specifically designed ...GetFPV
TIGER MOTOR MN-4012+4014 SERIES BEARINGS
,
Details Tiger Motor upper and lower replacement bearings for the ...