Hobby-Lobby
I-METER 7 IN 1 MULTIMETER
| Technical Specifications | i-Meter 7 in 1 Multimeter Specs |
| Voltage measurement range | 60V |
| Voltage display resolution | 0.001V |
| Volt Port | 2.54mm pitch pins, 9 pins |
| Max current | 100A |
| Shunt resistance | 0.0001ohm |
| Displayed resolution A | 0.01 |
| Temperature resolution | 1 Celsius / 1 Fahrenheit |
| PPM signal output | 750uS - 2150uS |
| Propeller testing range | 1-5 blades |
| Propeller RPM range | 1-60,000 |
| Unit Dimensions | 3-3/4 in. x 2-7/8 in. x 3/4 in. |
| Net Weight | 85g |
,
Jason Says: "Simply the best. If performance and service matters, ...Hobby-Lobby
CHARGER WIRE WITH SPEED 400 CONNECTOR & BANANA PLUGS
,
Charger Wire with SPEED 400 Connector & Banana Plugs Plugs ...Hobby-Lobby
JST CONNECTOR LEAD FOR BATTERY PACKS
,
The connectors used on micro helicopters 7" length. This is ...Hobby-Lobby
JST CONNECTOR LEAD FOR CHARGER
,
The connectors used on micro helicopters 7" length. This is ...Hobby-Lobby
13" SPEED 400 CONNECTOR LEAD, YELLOW
,
13" SPEED 400 Connector Lead, Yellow 13" yellow motor wires ...Hobby-Lobby
EZ-PEAK CHARGER WITH TRAXXAS CONNECTOR
EZ-Peak Charger Highlights:, Easy plug-and-charge operation,
EZ-Peak Charger by Traxxas Traxxas, the pioneer in Ready-To-Race® R/C, ...Hobby-Lobby
TWIN PEAK AC/DC DUAL PEAK CHARGER
,
Twin Peak AC/DC Dual Peak Charger The new Twin Peak ...Hobby-Lobby
X4 FOUR-CHANNEL DC MULTICHARGER
| Input | DC 11 - 15V |
| Needed to Complete | Power supply (20A minimum) |
X4 Four-Channel DC Multicharger Highlights:, Type:, 4-Channel Multicharger, # Cells:, 1-6 Cells LiPo/LiFe, 1-15 Cells NiMH/NiCD, 2-20V Pb, Current Discharge:, 0.1 - 1.0A (up to 5W [total units 20W]), Charge Rate:, 0.1 - 6.0A (up to 50W [total units 200W]), Battery Type:, LiPo, LiFe, Li-ION, NiCD, NiMH, Pb, Cooling Method:, Sensored twin cooling fans, Dimensions (WxLxH):, 225.4 x 158.6 x 62.4mm,
X4 Four-Channel DC Multicharger The Hitec X4 Multicharger is a ...Hobby-Lobby
TP820CD DUAL PORT 20A DC LIPO CHARGER W/ BALANCERS
| Technical Specifications | TP820CD Dual Port 20A DC LiPo Charger w/ Balancers Specs |
| Input | 10.5-28.0V DC (40 amps max) |
| # Cells | 1-8S LiPo/LiIon/LiFe (A123), 1-24 cell NiCd/NiMH and 6-30V Pb (lead-acid) |
| Charge Rate | Adjustable from 0.2 to 20A per port |
| Input Connector | 4mm bullet connector or alligator clips |
| Output Connector | 4mm bullet/banana |
,
TP820CD Dual Port 20A DC LiPo Charger w/ Balancers The ...Hobby-Lobby
JST CONNECTOR LEAD FOR BATTERY PACKS
,
The connectors used on micro helicopters 7" length. This is ...Hobby-Lobby
JST CONNECTOR LEAD FOR CHARGER
,
The connectors used on micro helicopters 7" length. This is ...Hobby-Lobby
13" SPEED 400 CONNECTOR LEAD, YELLOW
,
13" SPEED 400 Connector Lead, Yellow 13" yellow motor wires ...Hobby-Lobby
7-CELL STICK 3300MAH NIMH
,
7-Cell Stick 3300mAh NiMH Battery by Traxxas Traxxas models are ...Hobby-Lobby
SERIES 4 NIMH 7 CELL FLAT 8.4V
| Series 4 NiMH 7 Cell Flat 8.4V | TRA Connector Highlights |
| Series 4 NiMH 7 Cell Flat 8.4V | TRA Connector Specs |
| Type | NiMH |
| Capacity | 4000mAh |
| Voltage | 8.4V |
| Configuration | Flat |
40% greater capacity than typical sport packs for more punch,and longer run times, Technical Specifications:, Connector Type:, Traxxas High Current, Wire Gauge:12, Number of Cells:7,
Experience faster acceleration, faster top speeds The Series 4 cells ...Hobby-Lobby
POWER SERIES 1 7.2V NIMH
| Type | NiMH |
| Voltage | 7.2V |
| Connector Type | Traxxas |
| Wire Gauge | 16 AWG |
| Length | 4.75 in. (121mm) |
| Width | 1.25 in. (32.0mm) |
| Height | 0.75 in. (19.0mm) |
Specs:, Technical Specifications:, Length:, 4-3/4", Width:, 1-1/4", Height:, 3/4", Weight:, 12 oz.,
Power Series 1 for your 1/16 Slash and E-Revo Whether ...