HobbyKing
3DSPINNER FOR HP-50 / DLE55 / DA50 / JC51 (41X41X26MM) RED
| Shaft size | 10mm |
| Bolt hole | 5mm |
5 Reviews
HobbyKing
BMS-661DMG+HS SUPER FAST DIGITAL SERVO (MG) 6.4KG / .08SEC / 46.5G
| Weight | 46.5g / 1.66oz |
| Dimensions | 40.5 x 20 x 38mm / 1.60" x 0.78" x 1.54" |
| Torque At 6.0V | 6.4kg/cm , 89 oz/in |
| Speed At 6.0V | 0.08 sec / 60° at no load |
| Operating voltage | 4.8 - 6.0V |
5 Reviews
HobbyKing
TURNIGY 26HP-S 26CC GAS ENGINE 3.0HP
| Performance | 3.0hp |
| RPM | 1,200-7,200rpm |
| Idle | 2,000rpm |
| Suggested prop | 16x8 ~ 18x8 |
| Spark Plug | CM-6 |
| Bore/Stroke | 34 x 28mm |
| Weight | 850g |
| Fuel | 2 Stroke oil/fuel mix (25 |
5 Reviews
HobbyKing
X8R 2.4GHZ 8CH RECEIVER
,
The time to upgrade is now. The X8R 2.4ghz receiver ...5 Reviews
HobbyKing
SEAGULL GLIDE WIRELESS SAILPLANE FLIGHT SYSTEM
Here are just a few of the features found only on the Glide system:,
Seagull PRO Wireless Sailplane Flight System, 900mhz We are pleased ...5 Reviews
HobbyKing
KB45-12L 1400KV BRUSHLESS INRUNNER
| Weight | 449g |
| Shaft | 6mm |
| Size | 63x45mm |
| Voltage | 36v |
| Highest rated power | 2246W |
Kv: 1400RPM/V,
KB45-12L 1400kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
SPINNER FOR FOLDING PROP (LARGE)
| Weight | 24g |
| Diameter | 45mm 1.75inch |
3 Reviews
HobbyKing
FUTABA 12FGH PCM G3 2048 W/R6014HS 2.4GHZ RECEIVER (MODE 1)
,
Taking twelve-channel control to the next level! When you improve ...5 Reviews
HobbyKing
SPINNER 56DIAM / 5MM SHAFT
| Weight | 63g |
3 Reviews
HobbyKing
X8 R4 4CH 2.4GHZ RECEIVER
| Weight | 3.2g |
Size:, 36 X 14 X 3mm (1.97 X 1.02 X 0.39 inch),
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
TOKI BIOWIRE 1G MICRO SERVO (WORLD FIRST)
| Dimensions | 38 x 9 x 3 (mm) |
| Weight | 0.8g (except a horn, a connector and cable) |
| Actuator | BMF65 x 120 mm (wight |
| Materials | body; ABS, built in parts and horn ; POM, PC boad ; Lead-free solder |
| Torque | approx. 15 gCm |
| Operational Angle | 30 degrees, right and left each side |
| Power Supply Voltage | 3-5V |
| Max. Current Consumption | 80mA, 0.3W (at right or left end point @ 4.8V ) |
| Input Line | 3 wire type; power supply (red +, black -), signal (white) |
| Control Signal | positive PWM signal of 1.5ms ± 0.5ms in every 20ms |
| Operating Temperature | 0-40 degrees (Celsius) |
5 Reviews
HobbyKing
S24011 HEAVY DUTY HIGH SPEED SERVO 24.7G / 2.4KG / .08SEC
| Torque | 2.40kg |
| Speed | 0.08sec / 60deg |
| Weight | 24.7g (33.3oz) |
| Voltage | 4.8-6v |
| Plug | JR type |
Features:, High speed of 0.08s/60deg @ 4.8V,
S24011 24.7g / 2.4kg / .08sec Standard Heavy Duty High ...2 Reviews
HobbyKing
HXT ALLOY COMPOSITE FIREWALL MOUNT (85/36MM)
: 32g, : 85mm ~ 36mm (Adjustable),
Light weight composite alloy makes this mount very light and ...5 Reviews
HobbyKing
HOBBYKING ULTRA MICRO SERVO 1.7G FOR 3D FLIGHT (LEFT)
| Size Category | Ultra Micro servo |
| Type | Digital |
| Application | Ultra-Micro Aircraft |
| Speed | 0.12sec |
| Torque | 80g |
| Voltage | 3.7V~4.2V |
| Dimensions | 20.8 x 15 x 11mm |
| Weight | 1.7 g |
| Gear Type | Nylon |
| Connector type | Micro JST |
Specifications:,
A light weight linear servo with inbuilt controller for 1S ...5 Reviews
HobbyKing
3D SPINNER FOR DLE111 / DA100 / TMM-53 /TMM-106 / 3W 50-100 (BLUE)
| Shaft size | 10mm |
| Dimensions | 55x33mm |
| Bolt hole | 5mm |