HobbyKing
BMS-706 LOW PROFILE HIGH SPEED SERVO 4.6KG / .13SEC / 26G
| Weight | 26g / 0.92oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 4.6kg/cm , 65 oz/in |
| Speed At 4.8V | 0.13 sec / 60° at no load |
5 Reviews
HobbyKing
TURNIGY G32 BRUSHLESS OUTRUNNER 770KV
| RPM | 770kv |
| Max current | 42A |
| No load current | 10V/2.4A |
| Current capacity | 55A/15sec |
| Internal resistance | 0.02 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 72x42mm |
Battery:, 3~4 Cell /11.1~14.8V, Weight:, 212g (not including connectors),
Designed to be a direct swap out for your 32 ...5 Reviews
HobbyKing
BMS-760DMG LOW PROFILE DIGITAL SERVO(METAL GEAR) 5.6KG / .18SEC / 34G
| Weight | 34g / 1.19oz |
| Dimensions | 42 x 21.5 x 22 mm / 1.65 x 0.85 x 0.87 inch |
| Torque At 4.8V | 5.6kg/cm , 79 oz/in |
| Torque At 6.0V | 7.2kg/cm , 112 oz/in |
| Speed At 4.8V | 0.18 sec / 60° at no load |
| Speed At 6.0V | 0.16 sec / 60° at no load |
5 Reviews
HobbyKing
BMS-303-JST ULTRA MICRO SERVO 0.7KG / .11SEC / 3.4G
| Weight | 3.4 grams / 0.13 oz. |
| Dimensions | 19 x 7.5 x 15.5 mm / 0.75 x 0.29 x 0.61 inch |
| Torque At 4.8V | 0.7kg/cm , 11 oz/in |
| Speed At 4.8V | 0.11sec / 60 deg at no load |
| Plug type | JST |
5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (880KV)
| Weight | 363g |
| Voltage | 4~8S |
| Max Current | 90A |
| Diameter of shaft | 6mm |
| Length of front shaft | 21.5mm |
| ESC | 100A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:880rpm/V, Turns:8T,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
C2230 MICRO BRUSHLESS OUTRUNNER 1780KV (27G)
| Diameter | 22.2mm |
| Length | 32mm |
| Shaft | 5mm |
| Weight | 27g (with 10cm wire) |
| Power | 98W |
| Resistance | 642 |
| Idle Current | .7A |
| Max amp | 15A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1780rpm/v, Turns: 15,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
X8 R7 7CH 2.4GHZ RECEIVER (SHORT ANTENNA)
Size:, 50 X 26 X 10mm (1.97 X 1.02 X 0.39 inch), Weight:8g,
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
HIGH STRENGTH FIBER TAPE 20MM X 50MTR
| Width | 20mm |
| Length | 50 meter |
5 Reviews
HobbyKing
TURNIGY PARK300 BRUSHLESS OUTRUNNER 1380KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1380kv |
| No load current | 8V/0.4A |
| Current capacity | 9A/15sec |
| Internal resistance | 0.33 ohm |
| Weight | 24g (not including connectors) |
| Diameter of shaft | 3mm |
| Dimensions | 37x28mm |
Max current: 7A,
Designed to provide reliable and clean power for 3D parkflyers. ...5 Reviews
HobbyKing
HEXTRONIK 20GRAM BRUSHLESS OUTRUNNER 2300KV
| Diameter of shaft | 2mm |
| Length of front shaft | 9.8mm |
| Max current | 5.3~8.5A/20S |
| Prop | 6x3~7x3.5 |
| Thrust | 300g |
| Power | 72W |
Dimension:, 23mm x 24mm, 34mm(with shaft), Weight:, 20g (kv2300) (not including connectors), Voltage:2S,
Max performance For 200~300g model airplane (Indoor).5 Reviews
HobbyKing
HOBBY KING 2.4GHZ 6CH TX & RX V2 (MODE 1)
Note:, Only HK-T6A receiver is comptible with HK-T6A transmitter.,
HobbyKing 2.4Ghz 6Ch Tx & Rx V2 (Mode 1)(THROTTLE ON ...5 Reviews
HobbyKing
BMS-L530DMG+HS 1/5 SCALE DIGITAL SERVO (MG) 19.8KG / .15SEC / 140.5G
| Weight | 140.5g / 4.96oz |
| Dimensions | 59.6 x 29.9 x 55.48mm / 2.35" x 1.18" x 2.18" |
| Torque At 4.8V | 19.8kg/cm , 262 oz/in |
| Torque At 6.0V | 24.3kg/cm , 348 oz/in |
| Speed At 4.8V | 0.15 sec / 60° at no load |
| Speed At 6.0V | 0.12 sec / 60° at no load |
3 Reviews
HobbyKing
TCF 23X8 HIGHPRECISION CARBON FIBER SPORT PROPELLER
| Weight | 160g |
| Prop hole | 10mm |
5 Reviews
HobbyKing
KD REPLACEMENT SHAFT KIT 20-S
| Diameter | 3.15mm |
| Length | 36.5mm |
5 Reviews
HobbyKing
D05010MG 5.7G / .61KG / .07SEC DIGITAL METAL GEAR MICRO SERVO
| Torque | 0.51kg ~ 0.61kg |
| Speed | 0.07 ~ 0.09sec / 60deg |
| Weight | 5.7g (.20oz) |
| Voltage | 3.7~5.0V |
| Size | 27x8.7x22mm |
| Plug | JR type |
Features:, Quartz crystal microprocssor V3,
D05010MG 5.7g / .61kg / .07sec Digital Metal Gear Micro ...5 Reviews