HobbyKing
HOBBY KING 2.4GHZ 4CH TX & RX V2 (MODE 2)
Note:, Only HK-T6A receiver is comptible with HK-T4A transmitter.,
HobbyKing 2.4Ghz 4Ch Tx & Rx V2 (Mode 2)(THROTTLE ON ...5 Reviews
HobbyKing
HGD DIGITAL 260MG METALGEAR SERVO 21G / .16 / 2.7KG
Speed | .16sec/60deg |
Stall Torque | 3.2kg |
Dynamic | 2.7kg |
Weight | 21g |
Size | 38x30x13mm |
5 Reviews
HobbyKing
680MM MS COMPOSIT 3D NIGHT MAIN BLADES
Length | 680mm |
Width | 60mm |
Grip | 12mm |
Hole | 4mm |
5 Reviews
HobbyKing
SPINNER 30DIAM / 3MM SHAFT
Weight:9g,
Spinner suits motors with a 3mm shaft. Diameter is 30mm ...5 Reviews
HobbyKing
KB45-10XL 1200KV BRUSHLESS INRUNNER
Weight | 557g |
Shaft | 6mm |
Size | 77x45mm |
Voltage | 36v |
Highest rated power | 2880W |
Kv: 1200RPM/V,
KB45-10XL 1200kv Brushless Inrunner This size motor will fit our ...5 Reviews
HobbyKing
SPINNER 45DIAM / 5MM SHAFT
Weight | 33g |
3 Reviews
HobbyKing
EAGLETREE HEAVY DUTY E-LOGGER V4 WITH WIRE LEADS, 80 VOLTS, 150 AMPS
http | //www.eagletreesystems.com/MicroPower/micro.htm |
NEW: Eagle Tree continues to innovate in data collection with the eLogger V4. In addition to greatly enhanced resolution and accuracy, the V4 now supports voltage to 80 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!, Here are the key features of the MicroPower:, Logs pack current to +/- 100 amps and voltage from about 4.5 volts to 45 volts, NEW: Accepts optional inexpensive sensors for Temperature, RPM (brushless, magnetic or optical), GPS, Airspeed, Altitude, Servo Current, Throttle Movement, and more, available below,
EagleTree MicroPower E-Logger Current is measured with a true Hall ...5 Reviews
HobbyKing
DIGITAL SERVOLESS RETRACTABLE SYSTEM (1PC) 54G
Working voltage | 4.8~6V |
Speed | .08s/60deg 4.8v - 0.6s/60deg 6v |
Angle limit | 90 degree when retracted |
Operating temp | -10~50C |
Dimensions | 73.5x44x28mm |
Weight | 54g |
Shaft size | 5mm |
Mounting area size | 44mm x 41mm |
Length | 74mm |
Features:, Robust landing gear strut and mounting bracket,
The easiest way to put retracts in your plane. No ...5 Reviews
HobbyKing
BMS-825DMG+HS HIGH PERFORMANCE DIGITAL SERVO (METAL GEAR) 9.1KG / .10SEC / 58G
Weight | 58g / 2.04oz |
Dimensions | 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 inch |
Torque At 4.8V | 9.1kg/cm , 126 oz/in |
Torque At 6.0V | 10.6kg/cm , 144 oz/in |
Speed At 4.8V | 0.10 sec / 60° at no load |
Speed At 6.0V | 0.08 sec / 60° at no load |
5 Reviews
HobbyKing
TURNIGY 480L V-SPEC INRUNNER W/ IMPELLER 1370KV
Diameter of shaft | 4mm |
Length of front shaft | 13mm |
Battery | 4 Cell 4S/14.8V |
RPM | 1370kv |
Max current | 60A |
No load current | 1.0A |
Internal resistance | 57.10ohm |
Data | 4S 14.8V |
Max Current | 17.7A, 19.5A, 25A |
Pull | 1030g, 1120g, 1300g |
ESC | 60A |
Battery Type | 4S Only |
Dimension:, 57mm x 30mm, 70mm(with shaft), Weight:, 143g (kv1500) (not including connectors), Lamination thickness: ., Prop:, APC12x8, APC12x6, APC8x3.8,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
TURNIGY G160 BRUSHLESS OUTRUNNER 245KV (160 GLOW)
Battery | 9~10 Cell /33.3~37V |
RPM | 245kv |
Max current | 60A |
No load current | 10V/1.45A |
Current capacity | 78A/15sec |
Internal resistance | 0.03 ohm |
Diameter of shaft | 8mm |
Dimensions | 89x64mm |
Weight:, 649g (not including connectors),
Designed to be a direct swap out for your 160 ...5 Reviews
HobbyKing
PROP ADAPTER W/ ALU CONE M5X2.3MM SHAFT (GRUB SCREW TYPE)
,
Propeller adapter. To suit; 2.3mm Motor Shaft. 5mm Propeller Shaft. ...5 Reviews
HobbyKing
C2222 MICRO BRUSHLESS OUTRUNNER 2850KV (15G)
Diameter | 22.2mm |
Length | 24mm |
Shaft | 5mm |
Weight | 15g (with 10cm wire) |
Power | 60W |
Resistance | 485 |
Idle Current | .7A |
Max amp | 10A (15sec burst) |
Voltage | 2-4cell Lipoly |
Kv: 2850rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
HOBBYKING 40A BLUESERIES BRUSHLESS SPEED CONTROLLER
Brake | off |
Low voltage cutoff threshold | Medium (3.0V/65%) |
Timing setup | Automatic |
Soft Acceleration Start Up | Medium |
Governor mode | OFF |
Frequency | 8kHz |
Low voltage cutoff type | Reduce power |
Cont. Current | 40A |
Burst Current | 60A |
SBEC | 5.5V/ 4A Output |
Size | 52*23*7mm |
Weight | 30g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-6 Cell Lipo / 5-18 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
160W DREMEL STYLE ROTARY HAND-TOOL W/ 33PC SET 230V
Voltage | 230V-50Hz |
Maximum output | 160W |
No load speed | 8,000-35,000rpm |
Collet chuck capacity | 2.0-3.2mm dia. |
Specifications:,
An indispensable tool for any hobbiests workshop. This quality built ...5 Reviews