Skip to content

HobbyKing

TURNIGY NANO-TECH 6000MAH 6S 25~50C LIPO PACK

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance! Turnigy Nano-Tech High discharge batteries & deliver full capacity as well as being the best value batteries in the hobby market today!Spec.Capacity: 6000mAhVoltage: 6S1P / 6Cell / 22.2VDischarge: 25C Constant / 50C BurstWeight: 908g (including wire, plug & case)Dimensions: 167x49x55mmBalance Plug: JST-XHDischarge Plug: 4mm Bullet-connectorSuited to the following models: MIKADO LOGO500/500SE, ALIGN T-REX600   * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly. Advantages over traditional Lipo batteries.Power density reaches 7.5 kw/kg.Less Voltage sag during high rate discharge, giving more power under load.Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.Greater thermal control, pack usually d,

Read more

5 Reviews

HobbyKing

HOBBYKING 928BB SERVO 2.0KG/ 9G/ 0.13SEC

ModelHK-CS928BB
Operating Voltage4.8V / 6.0V
Operating Current200mA / 240mA
Stall Torque1.8kg.cm / 2.0kg.cm
Dead Band≤5uSec
Ball bearingMR85
GearPlastic
Connector wire215mm
Operating Temperature Range-20J+60J

Operating Speed:, 0.14sec.60º/ 0.13sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Weight:9g, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,

HobbyKing 928BB Servo 2.0kg/ 9g/ 0.13sec

Read more

5 Reviews

HobbyKing

DIGITAL METAL GEAR SERVO 16G/4.6KG/.16SEC

ModelHD-2213MG
Voltage4.5v~6v
Speed0.16sec @ 6.0v
Torque4.6kg.cm @ 6.0v
Bearings1BB
GearsMetal
Weight15.8g
Size22.8x12x29.4mm

Read more

5 Reviews

HobbyKing

TURNIGY NANO-TECH 1800MAH 3S 25~50C LIPO PACK

Capacity1800mAh
Dimensions115x35x21mm
Balance PlugJST-XH
Discharge PlugXT60

Voltage:, 3S1P / 3 Cell / 11.1V, Discharge:, 25C Constant / 50C Burst, Weight:, 161g (including wire, plug & case), Suited to the following models:, ALIGN T-REX450, E-flite Blade 450 3D/400 3D, BEAM E4, MSH Protos Mini, Furion 450, ThunderTiger E325/Mini Titan SE, Caliber 450V.,

More than just a fancy name. TURNIGY nano-tech lithium polymer ...

Read more

5 Reviews

HobbyKing

HK EDF64 BRUSHLESS POWER SYSTEM 3500KV & 45A ESC

Size64mm
Weight139g
Dimensions100x77mm
No.Of cells4S(14.8V)
Shaft diameter3.0mm
Output Power520w
Max Current(<60s)35A
Thust1100g(38.8oz.)
Recommended model weight600-800g

Motor:, 2836 Brushless outrunner, Blade type:5,

Boost the power of your stock 64mm jet with this ...

Read more

5 Reviews

HobbyKing

HK2839 EDF OUTRUNNER 2800KV FOR 70MM

SpecsKv-
Dimensions64 x 28mm
Shaft diameter4.0mm
Shaft length15mm
Voltage14.8V
Weight95g
Output Power550w
Max Current(<60s)36A
Thrust1200g(42.33oz.)
Recommended model weight800-1200g
Recommended model fans70mm Fans
Mounting Hole Bolt Circle18mm & 20mm
Mtg. Hole Number & Size4 x M2
HK2839 EDF Outrunner 2800kv for 70mm 2800

Read more

5 Reviews

HobbyKing

TURNIGY 1800A SERVO 8G/1.7KG/.10SEC

ModelTGY-1800A
Speed0.10sec
Torque1.7kg/cm
Size22x11.7x24.3mm

Voltage:6v, Weight:8g,

Micro analog servo. Precise, jitter free response for small parkflyers ...

Read more

5 Reviews

HobbyKing

DIGITAL HIGH TORQUE BEARING SERVO 41G/4.1KG/.17SEC

ModelHD-4180BB
Voltage4.5v~6v
Speed.17sec
Torque4.1kg/cm
Bearings2BB
GearsPlastic
Weight41g
Size41x20x36mm

Read more

5 Reviews

HobbyKing

GWS 8CH DUAL CONV 35MHZ FM RECEIVER

ModelGWRXS001
Channels8ch
SystemFM (PPM) Dual Conversion
Voltage4.8~7.2v
Current Drain10mA
Weight22g/.78Oz
Size65x25x15.5mm
Range600mtr+ / 2000ft
Adjacent channel rejectionbetter than 65dB at ± 10k Hz
Image rejectionbetter than 65dB
Spurious rejectionbetter than 80dB
nter modulationbetter than 65dB

Sensitivity : 1,

GWS 8ch Dual Conv 35mhz FM Receiver The compact, lightweight ...

Read more

5 Reviews

HobbyKing

POLYQUEST 2550MAH 4S 25C LIPOLY (VERSION 2)

Capacity2550mAh
Cell ModelPF 7138110XP
Voltage14.8V
Charge Current(2C)5.0A
Continous Dis.(25C)62.5A
Dimension(mm)136 * 38 * 27
Weight256g
http//www.enerland.com
http//www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8790
Polyquest 2550mAh 4S 25C Lipoly (Version 2) Polyquest packs are ...

Read more

5 Reviews

HobbyKing

SCM 3213 1750KV BRUSHLESS OUTRUNNER

Battery2-3 Lipoly
Max Eff81%
Max Current7 to 11A (over 74% efficiency)
Int. Resistance89mohm
10v no Load current.75A
Dimensions25.7 x 26mm
Shaft3mm
Weight45g
Model Sizeup to 300-630g
Recommended Prop9x5 3S / 10x5 2S

Kv: 1750rpm/v,

Spec.

Read more

3 Reviews

HobbyKing

D-MG16 METAL GEAR 2.9KG/.08SEC/18.8G

ModelD-MG16
Weight18.8g
Torque2.9kg @6v
Speed.08sec
Voltage4.8 to 6v
Size29 x 11.2 x 29mm
GearMetal
Our new favourite servo. The D-MG16 packs a high-torque punch ...

Read more

5 Reviews

HobbyKing

GWS NARO+D 10G DIGITAL SERVO

ModelNaro+D
Voltage4.8v~6.0v
Speed.16sec
Torque1.6kg/cm
Weight10g
Size22.2x11.0x24.95mm
GWS Naro+D 10g Digital Servo

Read more

5 Reviews

HobbyKing

TURNIGY NANO-TECH 1800MAH 4S 25~50C LIPO PACK

More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo  nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots! Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!Spec. Capacity: 1800mAhVoltage: 4S1P / 4 Cell / 14.8VDischarge: 25C Constant / 50C BurstWeight: 207g (including wire, plug & case)Dimensions: 117x36x28mmBalance Plug: JST-XHDischarge Plug: XT60 ConnectorSuited to the following models: RAVE450 * The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. 1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity. 2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.Advantages over traditional Lipo batteries;-Power density reaches 7.5 kw/kg.-Less Voltage sag during high rate discharge, giving more power under load.-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.-Greater thermal control, pack usually doesnt exceed 60degC-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly during heavy load.-Higher capacity during heavy disc,

Read more

5 Reviews

HobbyKing

NTM PROP DRIVE SERIES 35-36A 1400KV / 550W

Max current55A
Max Power550W
Shaft4mm
Weight117g
ESC60A
Cell count3s~4s Lipoly
Bolt holes18.9mm & 25mm
Suggested Prop8x4 ~ 11x5.5

Specs:, Model:, NTM Prop Drive 35-36A 1400, Kv:1400rpm/v, Turns:7, Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 8x4 - 14.8v - 621W - 42A,

NTM Prop Drive motors are rock-solid performance outrunners with tight ...

Read more

5 Reviews

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby