HobbyKing
3 WAY AIR RETRACT LANDING-GEAR SYSTEM (TRIKE-LARGE)
For Models Up to | 6kg Flying Weight |
Air Tank Capacity | 300ml |
Retract Dimensions | 86mmx42mmx25mm |
Retract Weight | 64g (per unit) |
Undercarriage Pin | 5mm |
System Total Weight | 355g |
Depth | 24.56mm |
Mounting Plate | 39.55mmx42.20mm |
Mounting Holes | 27.70mmx32.20mm |
Mount Pin Rear Legs | 5mm |
Wheel Axle | 4mm |
Specs:, Retract Dimensions:, Total Length:, 86.30mm (Inc Nipple), Landing Gear Strut Dimensions:, Length Rear Legs:, 115mm (Not Inc Mount Pin), Length Front Leg:, 117mm (Not Inc Mount Pin), Front Leg:, Bronze bushing for steering,
Complete air up/down Tricycle landing gear system that features adjustable ...5 Reviews
HobbyKing
SEAFURY FUNFIGHTER - EPO 600MM (PNP) INCL. HIGH-SPEC (3S~4S) ESC
So, you want a fast parkflyer!?Forget boring scale details and shelf queen good looks this Seafury is built for speed and all out fun! Dog fight with friends on 3S or use a 4S pack for heart pounding high speed passes, either way the Fun fighters have you covered. The combination of the light weight EPO airframe, a high power brushless motor and a simple aileron and elevator setup place these models amongst the most exhilarating park flyers to hit the market this year. Dont be left out of the fun! This model comes plug and fly and only requires a few minutes of assembly time and flies like its on rails thanks to the one piece molding technique used in the construction. All you will require to have the Seafury in the air is a 3~4S 850mAh 20C Lipoly battery and your own transmitter and receiver (Tx/Rx) Specs.Length: 520mmWing Span: 600mmFlying weight: 305gProp: 5.5x4.5 (x3 Included)Motor: 2825-1950kv Brushless outrunner motor (Included)ESC: 20A High-Spec 3~4S (Included)Servo: 3 x 8gram (Included)Battery: 850mAh 3~4S 20C Lipoly (Required) Required.850mAh 3~4S 20C Lipoly BatteryYour own transmitter and Receiver Note: For a truly Ballistic upgrade try the Turnigy nano-tech 850mAh 4S 45~90C Lipo Pack. See the related items below.,
5 Reviews
HobbyKing
CORONA CS238MG METAL GEAR SERVO 4.6KG/ 22G/ 0.14SEC
Model | CS238MG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 300mA / 400mA |
Stall Torque | 4kg.cm / 4.6kg.cm |
Size | 29X13X30mm |
Weight | 22g |
Dead Band | ≤5uSec |
Ball bearing | MR106 |
Gear | Metal |
Connector wire | 215mm |
Operating Temperature Range | -20c+60c |
Operating Speed:, 0.15sec.60º/ 0.14sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 3 slider/Direct Drive,
Corona CS238MG Metal Gear Servo 4.6kg/ 22g/ 0.14sec5 Reviews
HobbyKing
CORONA DS238MG DIGITAL METAL GEAR SERVO 4.6KG/ 22G/ 0.14SEC
Model | DS238MG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 300mA / 400mA |
Stall Torque | 4kg.cm / 4.6kg.cm |
Size | 29X13X30mm |
Weight | 22g |
Dead Band | ≤3uSec |
Ball bearing | MR106 |
Gear | Metal |
Connector wire | 215mm |
Operating Temperature Range | -20c+60c |
Operating Speed:, 0.15sec.60º/ 0.14sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 3 slider/Direct Drive,
Corona DS238MG Digital Metal Gear Servo 4.6kg/ 22g/ 0.14sec5 Reviews
HobbyKing
CORONA DS329MG DIGITAL METAL GEAR SERVO 3.8KG / 32G / 0.11S
Model | DS329MG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 300mA / 400mA |
Stall Torque | 3.8kg.cm / 4.5kg.cm |
Size | 32.5 x 17 x 34.5mm |
Weight | 32g |
Dead Band | ≤3uSec |
Ball bearing | MR106 |
Gear | Metal |
Connector wire | 300mm |
Operating Temperature Range | -20J+60J |
Operating Speed:, 0.12sec.60º/ 0.11sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 5 slider/Direct Drive,
Corona 939MG Digital Metal Gear Servo 2.7kg/ 12.5g/ 0.13sec5 Reviews
HobbyKing
CORONA DS339MG DIGITAL METAL GEAR SERVO 4.4KG / 32G / 0.15S
Model | DS339MG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 300mA / 4000mA |
Stall Torque | 4.4kg.cm / 5.0kg.cm |
Size | 32.5 x 17 x 34.5mm |
Weight | 32g |
Dead Band | ≤3uSec |
Ball bearing | MR106 |
Gear | Metal |
Connector wire | 300mm |
Operating Temperature Range | -20J+60J |
Operating Speed:, 0.14sec.60º/ 0.15sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 5 slider/Direct Drive,
Corona DS339MG Digital Metal Gear Servo 4.4kg / 32g / ...5 Reviews
HobbyKing
CORONA DS939HV DIGITAL METAL GEAR SERVO 2.8KG/ 12.5G/ 0.12SEC
Model | DS939HV |
Operating Voltage | 6.0V / 7.2V |
Operating Current | 200mA / 240mA |
Stall Torque | 2.6kg.cm / 2.8kg.cm |
Weight | 12.5g |
Dead Band | ≤3uSec |
Ball bearing | MR85 |
Gear | Metal |
Connector wire | 215mm |
Operating Temperature Range | -20C+60C |
Operating Speed:, 0.13sec.60º/ 0.12sec.60º, Size:, 22.5X11.5X24.6mm(0.88"x0.45"x0.96"), Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
Corona DS939HV Digital Metal Gear Servo 2.8kg/ 12.5g/ 0.12sec5 Reviews
HobbyKing
NTM PROP DRIVE SERIES 42-38 750KV / 785W
Max current | 55A |
Shaft | 5mm |
Weight | 169g |
ESC | 60A |
Cell count | 3s~4s Lipoly |
Bolt holes | 25mm |
Specs:, Model:, NTM Prop Drive Series 42-38 750kv, Kv:750rpm/v, Max Power:, 403W @ 12v (3S) / 785W @ 15v (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Tests:, 13x10 - 11.1V - 344W - 31A - 1.79kg, Note:, An accessory pack is available for this motor. Please see the related items below.,
NTM Prop Drive motors are rock-solid performance outrunners with tight ...5 Reviews
HobbyKing
TURNIGY 1256TG DIGITAL TITANIUM GEAR SERVO 57G/8.5KG/.08SEC
Model | TGY-1256TG |
Operating Voltage | 4.8V / 6.0V |
Operating Current | 300mA / 400mA |
Stall Torque | 7.0kg.cm /8.5kg.cm |
Size | 40.1X20.1X37.3mm |
Weight | 57g |
Dead Band | ≤2uSec |
Motor | Coreless Type |
Ball bearing | 2BB |
Gear | Titanium |
Connector wire | 300mm |
Plug | JR Type |
Operating Temperature Range | -20c+60c |
Operating Speed:, 0.09sec.60º/ 0.08sec.60º,
5 Reviews
HobbyKing
FRSKY FLD-02 TELEMETRY DISPLAY SCREEN
Specifications | Model |
Compatibility | FrSky DFT, DJT and DHT |
Dimension | 55*40*12mm |
Pixel | 128*64 |
Blade | Blade Number |
Volt ratio | A1 & A2 Voltage Division Ratio |
Unit Set | Speed (m/s or MPH) |
Alarm Set | A1_1/2, A2_1/2, RSSI_1/2 |
Features:, 1) Show all connected sensors data;, Installation:, Connect FrSky FLD-02 to the UART and power connection on FrSky telemetry module (Rxd, Txd, +5V, GND) by the provided cable. Confirm the orientation is correct and make sure both switches on the telemetry module are OFF., Screen structures:, Main Screen:, FrSky Logo, Menu Screen:, Note:, Make sure the battery voltage division ratios are programmed in accordance with those of connected battery voltage sensors., Data Screen:, Screen-1:, GMT (H/M/S), Screen-2:, Altitude, Screen-3:, Total Voltage, Note:, Screen-3 shows up only when FrSky Lipo Voltage Sensor (FLVS-01) is connected, otherwise Screen-4 will show up after Screen-2., Screen-4:, Acceleration X/Y/Z, *Note:, Please see "Files" tab for user manual.,
FrSky FLD-02 Telemetry Display Screen 2) Capable of programming alarm ...5 Reviews
HobbyKing
CORONA DS929HV (7.4V) MG DIGITAL SERVO 2.4KG/ 12.5G/ 0.09SEC
Model | DS929HV |
Operating Voltage | 6.0V / 7.4V |
Operating Current | 200mA / 240mA |
Stall Torque | 2.2kg.cm / 2.4kg.cm |
Size | 22.5X11.5X24.6mm |
Weight | 12.5g |
Dead Band | ≤3uSec |
Ball bearing | MR85 |
Gear | Metal |
Connector wire | 215mm |
Operating Temperature Range | -20c+60c |
Operating Speed:, 0.10sec.60º/ 0.09sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 2 slider/Direct Drive,
Corona DS929HV (7.4v) MG Digital Servo 2.4kg/ 12.5g/ 0.09sec5 Reviews
HobbyKing
NINE EAGLES J6 PRO 6CH 2.4GHZ TRANSMITTER (MODE 1/MODE 2)
The J6 PRO is compatible with the following Nine Eagles models | Solo Pro 328 |
Dual rates | Yes |
Expo | Yes |
CCPM mixing | Yes |
Channel reversing | Yes |
This is the Nine Eagles J6 PRO 6CH 2.4gHz radio. This is a high quality radio that allows for binding with many Nine Eagles models such as the Solo Pro 100 and 180 helicopters. The J6 Pro offers many great features for both airplanes and helicopters such as:, Airplane and Glider:, Channel reverse function, Helicopter:, Channel reverse function, Specs:, Channels:6, Model type:, Airplane and glider/Helicopter, Flight mode:, Mode 1 or Mode 2 (user selectable by switch on back of radio), *Note:, This is the radio only - no receiver included,
Dual rate set General wing-mix Throttle curve setup Exponential setup ...HobbyKing
CORONA DS558HV DIGITAL METAL GEAR SERVO 14KG/ 58G/ 0.18 SEC
Model | DS558MG |
Operating Voltage | 6.0V / 7.4V |
Operating Current | 300mA / 400mA |
Stall Torque | 12kg.cm / 14kg.cm |
Size | 20X40X38.5mm |
Weight | 58g |
Dead Band | ≤3uSec |
Ball bearing | MR106 |
Gear | Metal |
Connector wire | 300mm |
Operating Temperature Range | -20c+60c |
Operating Speed:, 0.20sec.60º/ 0.18sec.60º, Operating Travel:, 40º/one side pulse traveling 400us, Potentiometer:, 5 slider/Direct Drive,
Corona DS558HV Digital Metal Gear Servo 14kg/ 58g/ 0.18 Sec5 Reviews
HobbyKing
SOLO PRO 180 3G FLYBARLESS 3D MICRO HELICOPTER - YELLOW (AUS PLUG) (RTF)
Rotor Diameter | 12.52" (318mm) |
Overall Length | 14.17" (360mm) |
Weight | 3.7oz. (105g) |
Battery | 3.7V 680mAh lipoly |
The J6 PRO 6CH 2.4gHz radio also comes included with this package. This is a high quality radio that allows for binding with other Solo Pro helis such as the Solo Pro 100, and with many great features such as:, Model Type Selection, Radio Type:, Mode 1 or Mode 2 (user selectable by swith on back of radio),
The Solo Pro 180 3G Flybarless 3D Micro Helicopter has ...5 Reviews
HobbyKing
SOLO PRO 180 3G FLYBARLESS 3D MICRO HELICOPTER - RED (AUS PLUG) (RTF)
Rotor Diameter | 12.52" (318mm) |
Overall Length | 14.17" (360mm) |
Weight | 3.7oz. (105g) |
Battery | 3.7V 680mAh lipoly |
The J6 PRO 6CH 2.4gHz radio also comes included with this package. This is a high quality radio that allows for binding with other Solo Pro helis such as the Solo Pro 100, and with many great features such as:, Model Type Selection, Radio Type:, Mode 1 or Mode 2 (user selectable by swith on back of radio),
The Solo Pro 180 3G Flybarless 3D Micro Helicopter has ...5 Reviews