HobbyKing
HOBBYKING BELATRIKE 2.15M ALLOY GONDOLA KIT
| Height | 455mm |
| Fan Housing Diameter | 320mm |
| Length | 335mm |
| Weight | 711gram |
| Wheel Size | 75mm x 22mm |
| ESC | 40Amp (Required) |
Specs:, Motor:, 35xx Brushless Outrunner (Required), Battery:, 11.1v 3S1P 4000mAh 20C Lipoly (Required), Servo:, 2 x Standard Servos (Required), Required:, HobbyKing Paraglider Parafoil 2.15m, Recommended Setup:, Turnigy 4000mAh 3s 20c Lipo battery,
Designed specifically for use with the Popular HobbyKing 2.15m Paraglider ...5 Reviews
HobbyKing
HOBBYKING POWERLOG 6S MULTIFUNCTION MONITOR & DATALOGGER
| Dimensions | 70mm x 38mm x 12.8mm |
| weight | 29g |
| Includes | Mini USB cable |
Specifications:, Functions:, Wattmeter with simultaneous Volts/Watts/mAh/Amps/Time display,
The HobbKing Powerlog 6s is a low cost, compact unit ...5 Reviews
HobbyKing
AP19 BRUSHLESS MOTOR
| Dimension | 24mm x 20mm |
| Diameter of shaft | 3mm |
| Voltage | 2S ~ 3s Lipoly |
| Max current | 8A (10A Burst) |
| Idle Current | 0.3A/7v |
| Pull | 205g ~ 310g |
Weight:, 23g (inc prop driver o-ring & screws), KV:1580rpm/v, Prop driver:, O-ring Prop saver (inc),
Max performance; Ideal for F3P models less than 180g and ...5 Reviews
HobbyKing
GEAR BOX 3MM - 22T - 64T
| Weight | 17g |
| Diameter of shaft | 2.8mm threaded |
| Length of front shaft | 30mm |
| Motor mount hole spacing | 16mm |
Dimension:, 62mm (total inc shaft) x 42mm, 13mm(cage only, not inc main gear pinion),
Gear Box 3mm - 22T - 64T for use with ...5 Reviews
HobbyKing
GEAR BOX 3MM - 10T - 40T
Dimension:, 38mm (total inc shaft) x 33mm, 16mm(cage), Weight:, 13g (inc prop adapter), :4mm threaded, :21mm,
Gear Box 3mm - 10T - 40T. This Hobbyking alloy ...5 Reviews
HobbyKing
MICRO P-40 WITH BRUSHLESS MOTOR
| Length | 470mm |
| Wingspan | 520mm |
| Flying weight | 90-100g |
| ESC | 5A/2S |
| Prop | 4 inch |
| Servos | 2x2.5g |
| Battery | 7.4V 2S 200mah Lipo |
Specifications:, Motor:, C10 Brushless outrunner, Required:, 5A/2S Brushless ESC,
The Micro P-40 comes 80% pre-built and includes a C10 ...5 Reviews
HobbyKing
182 LIGHT AIRCRAFT DELUXE VERSION (ARF)
| Length | 780mm / 30.7in |
| WingSpan | 980mm / 38.6in |
| Weight | 600g w/ battery |
| Servos | 9g x 4 (Required) |
| Prop | 8 x 6 (Included) |
Prop:, 8x6 (Spare Included), Motor:, Turnigy 2409 1600kv Bell Motor or similar (Required), ESC:, 25A brushless (Required), Battery:, 11.1v 1000mAh 3S1P (Required), Battery Compartment:, 110 x 34 x 32mm (MAX),
One of HobbyKings all time best selling models, the Deluxe ...5 Reviews
HobbyKing
DSR-30 SERIES MOUNTING BRACKET
Weight:6g,
DSR-30 Series Mounting Bracket - This plastic bracket is ideal ...HobbyKing
HOBBYKING MINI J3 CUB (ARF) (YELLOW)
| Wingspan | 680mm |
| Length | 510mm |
| Weight | 240g |
| Required | Your Own 4Ch TX/RX |
Spec:,
The Hobbyking Mini Cub is a stunning EPO (super tough ...5 Reviews
HobbyKing
FRSKY D6FR ACCST 6 CHANNEL RX
| Operating voltage | 3.5v~10v |
| Power consumption | 50mA |
| Resolution | 3072 |
| Latency | 18ms (FS) 9ms (HS) |
| Range | 1.5km |
| Dimensions | 42x22x11mm |
| Weight | 7.1g |
| Compatible with FrSky 2 way telemetry modules | DFT, DJY, DHT, DHT-U |
Features:, Advanced Continuous Channel Shifting Technology (ACCST is our advanced tecnology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., Receiver Specification:, Number of channels: 6,
FrSKY ACCST technology is proven, approved by many model associations, ...5 Reviews
HobbyKing
OFFSET OLEO LEG 160MM-12KG
| Specifications | Length |
| Pin | 6mm |
| Axle | 5mm |
: 160mm (To axle centreline), : 78g,
Offset Oleo Leg 160mm-12kg, for scale models up to 12kg ...5 Reviews
HobbyKing
HOBBYKING 3A SINGLE CELL ESC - BRUSHED MICRO MOTORS
| Net Weight | 0.4g |
| Weight with wires | 1.6g |
| Dimensions | 11.5 x 8.6 x 4mm |
| Voltage Range | 2.6~5.5v |
| Low Voltage Cut Off | 2.75v |
| Max Surge Current | 5A (3 seconds) |
:, Max Continous Current:3A,
The Hobbyking 3A Single Cell Brushed Motor Speed Controller is ...5 Reviews
HobbyKing
OFFSET OLEO LEG 175MM-12KG
| Pin | 6mm |
| Axle | 5mm |
Specifications:, Length:, 175mm (To axle centreline), : 85g,
Offset Oleo Leg 175mm-12kg, for scale models up to 12kg ...5 Reviews
HobbyKing
STIRRUP [NOSE-LEG) OLEO LEG 160MM-12KG
| Pin | 6mm |
| Axle | 5mm |
| Weight | 84g |
Specifications:, Length:, 160mm (To axle centreline),
Stirrup [Nose-leg) Oleo Leg 160mm-12kg, for scale models up to ...5 Reviews
HobbyKing
TRAILING LINK OLEO LEG 145MM-12KG
| Pin | 5mm |
| Axle | 5mm |
Specifications:, Length:, 145mm (To axle centreline), : 120g,
Trailing Link Oleo Leg 145mm, for models up to 12kg ...5 Reviews