HobbyWireless
PARKFLYER SWITCH-MODE BEC
| Model | ParkBEC |
| Specifications | Input voltage |
| Output current | 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 standard servos) |
| Weight | 6.2g/.22oz |
| Weight Without Wires | 4.1g/.14oz |
| Applications | Parkflyers |
Details:, , Description:, The ParkBEC is the smallest and lightest switch-mode BEC on the market. ParkBEC powers your receiver and servos much more efficiently than a standard BEC. As many as six sub-micro servos can be powered without worrying about an overheating BEC. ParkBEC works great up to very high voltages, and is especially suited for running parkflyer type aircraft. ParkBEC is often a necessity at 4s and above., Guide:, How to move between airplanes, Datasheet:, Installation guide.doc,
Many people don't realize that their ESC's BEC rating is ...HobbyWireless
NANO MICROPHONE W/VOLUME CONTROL
| Red | DC Power, 4VDC to 15VDC (connect to your transmitter's red wire) |
| Black (or Brown) | Ground (connect to your transmitter's black wire) |
| White (or Orange) | Audio Out (connect to your transmitter's white wire) |
Details:, If you liked the Tiny-Mic product, the new Mini-Mic should really excite you. It is the same quality adjustable volume, micro-phone as the Tiny-Mic, but is only 1/4 the size and weight, making it the ideal microphone for smaller models where size/weight are issues., Features:, , Wires functions:, , Volume Adjustment:, , Note:, The Nano Mic is NOT reverse polarity protected. Incorrect connections may cause damage and will void the warranty.,
It comes complete with 3-pin Futaba plug, or you can ...HobbyWireless
MINI GSM-GPRS-GPS TRACKER
| - Weight | 44g |
| - Band | 850/ 900/1800/1900Mhz or 900/1800/1900Mhz |
| - GPS Chip | SIRF3 Chip |
| - GPS Sensitivity | -159dBm |
| - Power | 3,7V (bateria li-ion incluida) |
Details:, Here is a powerful FPV device to track down your R/C model in case you lose it., - Size: L:71mm x A:44mm x A:20mm, The package includes:, - GPS / GSM Receiver,
The Tracker has a very sensitive GPS with a built-in ...HobbyWireless
LVBOOST - BOOST CONVERTER
Details:, LVBoost is a boost converter that can take voltages as low as 0.5V and convert them into higher, more useful voltages like 3.3V or 5V. It has an exceptionally low quiescent draw - typically under .4mA. these features make LVBoost a great choice for powering projects from solar or other renewable energy sources., Model:, , Specifications:, , Applications:,
From a 3V input, 500mA @5V out is easily achievable, ...HobbyWireless
INTELLIGENT LITHIUM CUTOFF
| Input voltage | 1s to 12s Lithium or Lithium Polymer |
| Cutoff voltage | 3.0V/cell |
| Weight | 3.5g/.13oz |
Details:, LipoShield is a low voltage cutoff device which enables any ESC to be used with lithium battery packs. It installs easily between your receiver and ESC and provides a reliable 3.0V per cell soft cutoff to prevent over-discharge damage to your expensive lipo packs., Model:, , Specifications:, , Applications:, , Instructions:,
LipoShield is a soft cutoff, so it is appropriate for ...HobbyWireless
ASR-25 - ADJUSTABLE SWITCHING REGULATOR
Details:, The DE-SWADJ 3 is a larger version of our DE-SWADJ adjustable step down voltage regulator. Previously it was necessary to put multiple DE-SWADJ units in parallel to achieve ratings over 1A, which was bulky, expensive and carried with it a considerable increase in dropout voltage. The DE-SWADJ 3 is designed to be stronger, faster and better. It can process 3A of current, typical ripple is 25mV and under ideal circumstances the regulator can be up to 96% efficient., Model:, , Performance:, , Applications:, , Datasheet:,
It continues the ease-of-use of the DE-SWADJ, making it simple ...HobbyWireless
ASR-10 - ADJUSTABLE SWITCHING REGULATOR
Details:, The ASR-10 is the adjustable version of our step down voltage regulators. It is designed to be the easiest possible way to add an adjustable voltage source to a new or existing project with all the efficiency benefits of switch-mode power. The ASR-10 is pin-compatible with the common 78XX family of linear voltage regulators, and has a small screw on top that allows you to change the output voltage as your project evolves. It has integrated decoupling capacitors, so external capacitors are not generally necessary., Model:, , Performance:, , Applications:,
ASR-10 can deliver a maximum of 10 Watts. The screw ...HobbyWireless
MINI RECEIVER VD5M 5 CH/ LED
| Compatibility | ► FrSky modules |
| ► Dimension | 21*16*5.8mm |
| ► Weight | 2.0g / 1.6g (naked) |
| ► Operating Voltage Range | 3.0V-7.2V |
| ► Operating Current | 20mA |
| ► Operating Range | >300M |
Details:, Super small and light weight, the FrSky VD5M is a perfect choice for park flyers and indoor models. It weighs in at only 2 grams!, Specifications:, ► Number of Channels: 5, Features:, ► Super small and light, designed for park flyers and indoor air crafts;,
Additionally, this RX is part of the FrSky "two way ...HobbyWireless
MINI RECEIVER TFR6M 6 CHANNEL/ LED
| ► Dimension | 31*23*7mm |
| ► Weight | 3.4g / 2.7g (naked) |
| ► Operating Voltage Range | 3.5V~10V |
| ► Operating Temperature Range | -10℃~60℃ |
| ► Ground Range | >300m |
Details:, Super small and light weight, the FrSky TFR6M is a perfect choice for park flyers and indoor models. It weighs in at only 3.4 grams!, Compatibility:, ► FASST 2.4G Air Systems, Specifications:, ► Number of Channels: 6, Features:, ► Lighter weight and physically smaller， designed for park flyers and indoor aircrafts;,
This micro receiver is compatible with FAAST 2.4G Air Systems ...HobbyWireless
LIPO VOLTAGE SENSOR FLVS-01
| Specs | # Model |
| # Dimensions | 45x21x7mm |
| # Weight | 5.2g |
| # Measurement range | 1~6S lipoly |
| # Cell voltage display range | 0.20~4.20V |
| # Voltage display resolution | 0.01V |
| # Voltage detection precision | 0.03V |
| # Current of the board | 15.5mA |
| # Operating temperature range | -30°C~70°C |
Details:, A colorful, easy to read OLED display screen. It can be used as a stand-alone unit for checking the voltage of your lipoly cells, or can be used in conjunction with the FrSky DHT-U telemetry display system as an add-on sensor to monitor your battery., Pixel:,
The sensor cable (for use with DHT-U ) is included. ...HobbyWireless
FRSKY DHT 8CH DIY TELEMETRY COMPATIBLE TRANSMITTER MODULE
| Operating voltage | 6.0V-13.0V (can handle 3S!) |
| Power consumption | 50mA |
| Resolution | 3072 (11bit) |
| Dimensions | 55x34x8mm |
Details:, FrSKY ACCST technology is proven, approved by many model associations, tested and reviewed as the leading Chinese 2.4Ghz R/C Technology. If you think DSM2 or FASST is the best, think again!, Features:, Advanced Continuous Channel Shifting Technology (ACCSTis our advanced technology it shifts channel hundred times per second and there is no signal conflicts and interruptions) robust frequency agility., :, Output Power:: 60mW, :, 1 x DHT DIY Transmitter Telemetry module,
The Two-way Radio System developed by FrSky provides an additional ...HobbyWireless
FEIYU TECH GPS RECEIVER
| Model | FY-GPS |
| Shipping Weight | 0.05 |
| Manufactured by | FeiYu Tech |
Details:, ,
This is the 10Hz GPS receiver and wiring used with ...HobbyWireless
(FUTABA TYPE) PLUG AND PLAY CABLE FOR SN555 CAMERAS
Details:, - Replacement cable for FPV plug & play systems only. It fits our SN555 and older models such as SN380 and SN480 cameras.,
- Power and video connector "Futaba" type, 100% compatible with ...HobbyWireless
EASY STAR II - MULTIPLEX
| Construction | Elapor foam on the fuselage, wing and tail section Wings |
| Radio | 3-channel Servos |
| Wingspan | 54" (1370mm) Wing Area |
Details:, Updated and upgraded, the quick-to-build and easy-to-fly EasyStar II is sure to become one of your favorite models. Based on one of the most popular aircraft, the original EasyStar, this improved kit boasts larger internal space, more payload capability and optional ailerons. It is designed to accept a powerful brushless motor which makes it a versatile, durable aircraft sure to impress both the beginner and more advanced pilots. Its gentle gliding characteristics and ease of transport make the EasyStar II effortless hobby fun., FEATURES:, INCLUDES:, Foam fuselage, wings, and tail section, prop, spinner, decals, instruction manual, and hardware, REQUIRES:, SPECS:, COMMENTS:, This model is NOT made from polystyrene foam. For this reason, it is not possible to use white glue or epoxy glue. ,
HobbyWireless
EASY STAR - READY TO FLY - RC RADIO & ELECTRONICS INCLUDE
| Model Specifications | Wing Length |
| Wing Area | 372 sq. in. |
| Wing Loading | 10.76 oz. | sq. ft. |
| Fuselage Length | 34 in. |
| Motor | Permax Speed 400 6V (Included) |
| Battery | 6 Cell NiMH 1100mAh (Included) |
| Speed Control | X-08 ESC (Included) |
| Weight (English) | 24 oz. |
| Flight Characteristics | Trainer |
| Target User | Beginner |
Details:, The Easy Star was designed for first time pilots in mind, one of the best models for FPV , because it offers incredibly stable flight characteristics and durability. It’s powered by a powerful Permax Speed 400 motor mounted on the top, so hard landings won’t break the prop or hurt the motor. The Easy Star flies with little input and has the ability to recover easily. Made from Multiplex’s durable ELAPOR Foam, the Easy Star will take a tremendous amount of abuse without breaking. When it does break it's easily repaired with CA (super) glue. Even after many crashes, the Easy Star will be ready for more. This is a great plane to teach someone to fly where other trainers would be ready for the trash can!, Ready to Fly Version Includes Everything You Need:, * Hitec Neon SS 72 MHz FM 3 Channel Transmitter,
* No Painting Required, Prefabricated and Colorful Parts made of ...