HiModel
WFLY 2.4G 9-CHANNEL RECEIVER WFR09S
| Receiver Model | WFR09S |
| Range test in ground | more than 900M |
| Dual MCU, dual antenna receiver | Contains two receivers working independently |
, , , , , , Specifications:, , , , , , , , , , , 2.4GHz receiver (WFR09S) 9 channel 2.4GHz dual MCU, dual antenna receiver, Use in：airplane, helicopter, glider, car, boat, Band：2.400GHz-2.4830GHz ( varies with different country and region), Receive sensitivity：-97dBm, Fail safe, quick recover signal, Modulation：PPM/PCMS 1024/PCMS 4096, Power：4.8-6V, Dimension：44.8×27.9×16.39mm, Weight：14.8g, Features:, Choose the optimum signal for antenna, More reliable, Quicker response, Better anti-interference, Longer range, , ,
Features: A. Hopping frequency is high Speed. WFLY 2.4G adopted ...5 Reviews
HiModel
FRSKY SENSOR HUB FSH-01
| Dimension | 37*30*8mm |
| Operating Voltage Range | 4~10V |
| Operating Temperature Range | -20~80℃ |
| Feature | Firmware upgradable |
, , , , , , Specifications:, , , , , , , , , , , Weight:, Installation:, It is recommended to take the length of all sensors’ wires into consideration before mounting, and use double-sided tape to install FrSky sensor hub at an appropriate place in the model., , ,
Features: FrSky Sensor Hub (FSH-01) FrSky Sensor Hub is recommended ...HiModel
FRSKY TEMPERATURE SENSOR TEMS-01
| Accuracy | 1 degree Celsius/ 1 degree Fahrenheit |
, , , , , , Specifications:, , , , , , , , , , , Up to two temperature sensors can be used at the same time. They are commonly used to read temperatures of model accessories, such as electric motor, ESC, glow and gas engine cylinder head, battery, muffler, voltage regulator, BEC, tailpipe and ambient air. Measurement Range: -30~250 degrees Celsius/ -22~482 degrees Fahrenheit, Installation: Use zip ties to hold the temperature sensor tightly against the accessory that requires temperature reading., , ,
Features: Different sensors facilitate to monitor different data, such as ...HiModel
FRSKY LIPO VOLTAGE SENSOR FLVS-01
| Model | FLVS-01 |
| Dimension | 45*21*7mm |
| Weight | 5.2g |
| Measurement range | 1S~6S (The first lipo voltage should be more than 3.55V) |
| Cell voltage display range | 0.20~4.20V |
| Voltage display resolution | 0.01V |
| Voltage detection precision | 0.03V |
| Current of the board | 15.5mA |
| Operating temperature range | -30℃~70℃ |
| Pixel | 128*64 with OLED display screen |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, ﹡Note:, To make the FLVS-01 works with sensor hub and FLD-02/DHT-U to display total voltage and cell voltages as connected, you may need to upgrade your firmware of sensor hub and DHT-U to version 2.0, refer to included instruction manual for details., , ,
Features: Different sensors facilitate to monitor different data, such as ...HiModel
FRSKY 2.4G 3/16 CHANNEL FUTABA FASST COMPATIBLE RECEIVER W/SB PORT TFR4SB
| Model | TFR4SB (3/16 channel FASST compatible receiver with SB port) |
| Dimension | 41*24*6mm |
| Weight | 6.0g/4.2g (naked) |
| Operating Voltage Range | 3.5 ~ 10V |
| Operating Temperature Range | -10℃~ 80℃ |
| Servo Frame Rate | 14ms (FS - Normal Speed Mode) |
| FASST 2.4G Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, |
| FASST 2.4G Surface Systems (C1 Mode) | 3PK, 4PK, etc. |
, , , , , , Specifications:, , , , , , , , , , , Specifications:, 7ms (HS - High Speed Mode), Compatible systems, TM-14, T14MZ, etc., Compatible servos at SB port, Futaba S.BUS servos, FrSky servo D12MB, , ,
Features: Features: 1) Compatible with FASST 2.4G: Air Systems (7CH ...HiModel
WFT06II 2.4GHZ 6-CHANNEL RADIO SYSTEM
| Model | WFT06II |
| Use in | Airplane,Helicopter,Car,Boat |
| Band | 2.400-2.483GHz |
| Output Power | ≤100mW |
| Modulation | 2.4GHz DSSS(spread Spectrum)+Frequency Hopping |
| Memory | 8-model memory |
| Power | 3.7-6.0V ≤190mA |
| Transmitter programe language | English |
, , , , , , Specifications:, , , , , , , , , , , Transmitter stick mode: both mode 1 and mode 2 are available, mode 2 (throttle on left hand) will be sent by default. If you need mode 1, you can specify the stick mode in the Remark field on the last step when place the order., , ,
Features: THIS IS THE NEW WFT06II. ● Great choice for ...2 Reviews
HiModel
WALKERA DEVO 6S 2.4G 6-CHANNEL DSSS RADIO SYSTEM W/RX601
| 1). Encoder | ARM micro computer system |
| 2). Frequency | 2.4Ghz（DSSS） |
| 3). Output power | -5dBm~20dBm |
| 4). Battery | 1.2VX4 NiCard or1.5VX4 AA dry batteries |
| 5). Current Drain | ≤220mA |
| * Stick mode | both mode 1 and mode 2 are available, mode 2 (throttle on left hand) will be sent by default. |
, , , , , , Specifications:, , , , , , , , , , , 6). Number of model storage: 12, , ,
Features: 1). 2.8 inch colored touch screen, Icon menu display，fashionable ...1 Reviews
HiModel
HIMODEL 3900KV BRUSHLESS MOTOR 3.17MM SHAFT B2835-8T
| Model | B2040-7T |
| Voltage Range | 6-12V |
| No Load Current(A) | 2.0 |
| Kv(Rpm/V) | 3900 |
| Resistance | 0.054Ω |
| Dimension | Φ28×35 (diameter is 28.2mm) |
| Weight(g) | 98g |
| Shaft diameter | Φ3.175 mm |
| Max Efficiency | 81% |
| Max Power | 250 W/60S |
, , , , , , Specifications:, , , , , , , , , , , Max Efficiency Current(A):35, Max Load Current (A/60S):40, , ,
Includes/Requires: Includes:1 x brushless motorHiModel
HOBBYWING 40A / 60A 2-6S ELECTRIC BRUSHLESS SPEED CONTROLLER (ESC) TYPE PLATINUM-40A
, , , , , , Specifications:, , , , , , , , , , , Platinum Series, , Normal Voltage ESC（Supports 2 to 6 Cells Lipo), , , , , , , , , , , , , , , , Class, , Model, , Cont., Current, , Burst, Current, , BEC, Mode, , BEC, Output, , User, Programmable, , Battery Cells, , Weight, , Size, , Lipo, , NiMH, , L*W*H, , 40A, , Platinum-40A, , 40A, , 60A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 38g, , 59*27*12, , 60A, , Platinum-60A, , 60A, , 90A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 68g, , 70*34*16, , 80A, , Platinum-80A, , 80A, , 120A, , Swicth, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 77g, , 70*34*16, , 100A, , Platinum-100A, , 100A, , 150A, , Switch, , 5.25V or 6V, 3A, , Yes, , 2-6, , 5-18, , 82g, , 70*34*16, , 150A, , Platinum-150A-OPTO, , 150A, , 220A, , None, , None, , Yes, , 2-6, , 5-18, , 125g, , 88*55*15, , High Voltage ESC（Supports 5 to 12 Cells Lipo), , , , , , , , , , , , , , , , 50A, , Platinum-50A-HV, , 50A, , 75A, , None, , None, , Yes, , 5-12, , 15-36, , 68g, , 70*34*16, , 70A, , Platinum-70A-HV, , 70A, , 105A, , None, , None, , Yes, , 5-12, , 15-36, , 82g, , 70*34*16, , 100A, , Platinum-100A-HV, , 100A, , 150A, , None, , None, , Yes, , 5-12, , 15-36, , 123g, , 88*55*15, , 120A, , Platinum-120A-HV, , 120A, , 180A, , None, , None, , Yes, , 5-12, , 15-36, , 125g, , 88*55*15, , , ,
Features: ► High performance microprocessor brings out the best compatibility ...4 Reviews
HiModel
830KV OUTRUNNER BRUSHLESS MOTOR TYPE FC2835-10T (REAR MOUNT)
| Model | FC2835-8T(R) |
| KV (rpm/v) | 830 |
| IO(A) | 1.1 |
| Ni-Mh Ni-Cd Battery(cell) | 8-12. |
| Lipo Battery (cell) | 3 - 4 |
| Running Current (A) | ＜20 |
| Weight | 68g / 2.4oz |
| Shaft Diameter(mm) | 4.00 |
| Thrust | 1200g / 42.3 oz |
, , , , , , Specifications:, , , , , , , , , , , Max Current (A): 25, Propeller:, , ,
Features: THIS IS THE REAR MOUNTING TYPE Includes/Requires: Includes:1 x ...1 Reviews
HiModel
4650KV 3.17MM SHAFT OUTRUNNER BRUSHLESS MOTOR FOR 450 CLASS HELICOPTER TYPE H2214-6
| Model | H2214-6 |
| KV (rpm/v) | 4650 |
| Size | 27.3(D) x 35(L)mm |
| Lipo Battery (cell) | 2 - 3 |
| Working current (A) | 20 to 40A |
| Power | 430W |
| Weight | 59g / 2.08 oz |
| Shaft Diameter(mm) | 3.17 |
| Application sample | 450 class electric heliocpters |
, , , , , , Specifications:, , , , , , , , , , , Io=3.1A (at 10V), , ,
Includes/Requires: Includes:1 x motor1 Reviews
HiModel
1:72 CHALLENGER II MBT（IRAQ WAR）07215
| Model Brief Length | 161.2mm Width |
, , , , , , Specifications:, , , , , , , , , , , Scale 1:72, Total Plastic Parts 105pcs, Box Size 25.5X16.3X4.8cm, Metal Parts n/a, Barcode 6922803672151, Resin Parts n/a, Qty. / Ctn 60pcs, Photo Etched Part n/a, MEAS. 55X50X52cm, Film Parts n/a, Total Sprues 7pcs, Decal Marking British ARMY, More Features n/a, , ,
Features: The Challenger 2 Main Battle Tank is the current ...HiModel
1:72 CHALLENGER II MBT （KFOR）07216
| Model Brief Length | 161.2mm Width |
, , , , , , Specifications:, , , , , , , , , , , Scale 1:72, Total Plastic Parts 99pcs, Box Size 25.5X16.3X4.8cm, Metal Parts n/a, Barcode n/a, Resin Parts n/a, Qty. / Ctn 60pcs, Photo Etched Part n/a, MEAS. 55X50X52cm, Film Parts n/a, Total Sprues 7pcs, Decal Marking British ARMY, More Features n/a, , ,
Features: The Challenger 2 Main Battle Tank is the current ...HiModel
1:72 JAPAN TYPE90 TANK 07219
| Model Brief Length | 136.1mm Width |
, , , , , , Specifications:, , , , , , , , , , , Scale 1:72, Total Plastic Parts 149pcs, Box Size 25.5×16.3×4.8CM, Metal Parts n/a, Barcode 6922803672199, Resin Parts n/a, Qty. / Ctn 60, Photo Etched Part n/a, MEAS. 55×50×52 CM, Film Parts n/a, Total Sprues 9PCS, Decal Marking Hokkaido 7th Div. 72nd Tank Rgt. 1st Co./3rd Co., More Features n/a, , ,
Features: The studying of 90 types tank and developing work ...HiModel
1:72 STURMTIGER ASSAULT MORTAR(LATE TYPE) 07247
| Model Brief Length | 87.1 mm width |
, , , , , , Specifications:, , , , , , , , , , , Scale 1:72, Total Plastic Parts 125PCS, Box Size 25.5X16.3X4.8cm, Metal Parts n/a, Barcode n/a, Resin Parts n/a, Qty. / Ctn 60pcs, Photo Etched Part n/a, MEAS. 55X50X52cm, Film Parts n/a, Total Sprues 6pcs, Decal Marking Germany Army, More Features n/a, , ,
Features: The Sturmtiger based on the Tiger I was armed ...