SDSHobby
DYNAM BRUSHLESS ESC-50A FOR MODEL AIRPLANES
| Cont. Current | 50A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-70A FOR MODEL AIRPLANES
| Cont. Current | 70A |
| Burst Current (>10s) | 100A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 62g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-60A FOR MODEL AIRPLANES
| Cont. Current | 60A |
| Burst Current (>10s) | 80A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 60g |
| L*W*H (Size) | 70*31*14mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-40A FOR MODEL AIRPLANES
| Cont. Current | 40A |
| Burst Current (>10s) | 55A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-6S |
| Cells of Ni-Cd/Ni-MH | 5S-18S |
| User Programmable | yes |
| Weight | 35g |
| L*W*H (Size) | 55*28*12mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-30A FOR MODEL AIRPLANES
| Cont. Current | 30A |
| Burst Current (>10s) | 40A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 25g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, , Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-25A FOR MODEL AIRPLANES
| Cont. Current | 25A |
| Burst Current (>10s) | 35A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 22g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually reduce the output power) or Cut-Off (Immediately stop the output power). Default is Soft Cut-Off., :, Low / Medium / High, default is Medium., For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., For nickel batteries, low / medium / high cutoff voltages are 0%/45%/60% of the startup voltage (i.e. the initial voltage of battery pack), and 0% means the low voltage cut-off function is disabled. For example: For a 10 cells Ni-MH battery, fully charged voltage is 1.44*10=14.4V, when “Medium” cut-off threshold is set, the cut-off voltage will be: 14.4*45%=6.5V., When using balance discharge monitoring and protection function(i.e. Plugging the balance charge connector on battery pack into the BDMP socket on the Guard series ESC, the ESC monitors not only the voltage of the whole battery pack but also the voltage of each cell). For lithium battery, low / medium / high cut off voltage for each cell is: 2.6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower than the cut-off threshold, the protection function activated., Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model on ground prior to flight!,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
DYNAM BRUSHLESS ESC-18A FOR MODEL AIRPLANES
| Cont. Current | 18A |
| Burst Current (>10s) | 22A |
| BEC Model | switch |
| BEC Output | 5V/3A |
| Cells of Li-Po/Li-ion | 2S-4S |
| Cells of Ni-Cd/Ni-MH | 5S-12S |
| User Programmable | yes |
| Weight | 19g |
| L*W*H (Size) | 45*24*11mm |
| Balance Discharger Protection | N/A |
| means the low voltage cut-off function is disabled. For example | For |
| when “Medium” cut-off threshold is set, the cut-off voltage will be | 14.4*45%=6.5V. |
Specifications:, Features:, Programmable Items:, Ø, Brake Setting:, Enabled / Disabled, default is disabled, Battery Type:, Li-xx (Li-ion or Li-poly) / Ni-xx (Ni-MH or NiCd), default is Li-xx., :, Soft Cut-Off (Gradually, :Low / Medium /, For lithium batteries, the number of battery cells is calculated automatically. Low / medium / high cutoff voltage for each cell is: 2.6V/2.85V/3.1V. For example: For a 3 cells lithium pack, when “Medium” cutoff threshold is set, the cut-off voltage will be: 2.85*3=8.55V., battery, low / medium / high cut off voltage for each cell is:, .6V/2.85V/3.1V. When the voltage of any cell in battery pack is lower, Startup Mode:, Normal / Soft /Super-Soft, default is Normal., Timing:, Low / Medium / High, default is Low. (Note2), Note2:, After changing the timing setting, please test your RC model,
Net Speed controllers for brushless motors are designed for best ...SDSHobby
GENSACE NI-MH SC 4500MAH 9.6V 8S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4500mAh |
| Voltage | 9.6V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 88g |
| Discharge current | 10C; MAX Discharge current |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 4500MAH 8.4V 7S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4500mAh |
| Voltage | 8.4V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 88g |
| Discharge current | 10C; MAX Discharge current |
| Connector | tamiya connector, and the connector can be customized according to customer demand |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 4500MAH 6V 5S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4500mAh |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 88g |
| Discharge current | 10C; MAX Discharge current |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:, Voltage: 6V,
SDSHobby
GENSACE NI-MH SC 4500MAH 7.2V 6S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4500mAh |
| Voltage | 7.2V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 88g |
| Discharge current | 10C; MAX Discharge current |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 4200MAH 7.2V 6S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4200mAh |
| Voltage | 7.2V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 80g |
| Discharge current | 10C; MAX Discharge current |
| Connector | tamiya connector, and the connector can be customized according to customer demand |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 4500MAH 4.8V 4S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 4500mAh |
| Voltage | 4.8V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 88g |
| Discharge current | 10C; MAX Discharge current |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 3300MAH 7.2V 6S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 3300mAh |
| Voltage | 7.2V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 70g |
| Discharge current | 10C; MAX Discharge current |
| Connector | tamiya connector, and the connector can be customized according to customer demand |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,
SDSHobby
GENSACE NI-MH SC 2400MAH 7.2V 6S NI-MH POWER BATTERY FOR RC MODELS
| Capacity | 2400mAh |
| Voltage | 7.2V |
| Single size | Dia 22.5mm Ht. 43mm |
| Single weight | 53g |
| Discharge current | 10C; MAX Discharge current |
| Connector | tamiya connector, and the connector can be customized according to customer demand |
| Usage | Suitable for all kinds of remote control model |
| Charger | You can use a simple charger or smart charger |
Parameters:,