Skip to content

ngHobbies

FORCEFLY

http//nghobbies.com/forum/index.php?topic=100.0

Demo Video:, Features:, Fully programmable flight control:,  Control the aircraft roll, pitch, and yaw (twist grip) with one hand, as well as throttle, programmable settings allow complete configuration of each axis – travel adjustment, dual rates, exponential, reverse, trim, etc., Force feedback control:,  Active force feedback – pushes the flight stick according to changes in aircraft attitude, Gyro Stabilisation:,  Mixes gyro feedback directly to control axes to provide automatic gyro flight stabilization, Model memory:,  Save up to eight different models in the ForceFly, PPM Channel Assignment:,  Assign any axis to any output channel, Interface ports:,  Optional head tracker interface (also for future expansion), Pacakge content:, - ForceFly circuit, Fully Supported Joystick:, - Logitech G940 Flight System (Highest Recommandation), Limited Support for:, - Microsoft Sidewinder 2, Documentation:, Quick Start Manual:, Click here, Detailed user guide on Wiki:, Click Here, Support thread:, New Firmware:, On October 7th, 2011, Version 1.10 firmware has been released. The firmware can be uploaded to all revious Forcefly versions as well using the PicKit 3 programmer kit, available here:, Pickit 3, A full documentation for the firmware upgrade procedure is still pending, till then you can download the firmware by clicking on the following link:, Download Firmware Version 1.10,

The ForceFly is another exciting FPV tele-presence product from EMR ...

ngHobbies

VIDEO OSD PRO EXPANDER

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro.   Here are some examples:, GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more), Advanced Features:, The OSD PRO advanced features include "RADAR," Voice Alerts, Return to Home,failsafe, and Waypoints., :, The plane icon labeled “RADAR” above serves two purposes: the direction the icon is pointingindicates your present course.   And, the location of the icon on the screen provides a synthetic map, similar to RADAR:  the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model’s location. The maximum distance and the “up” direction is configurable., Voice Alerts/Variometer:, Imagine hearing the status of your model through earbuds connected to your video receiver!  The OSD Pro fully supports voice warnings and status updates, via theaudio channel of your video transmitter.   Most of the available parameters can be programmed to provide voice alerts., For example, you can program the OSD Pro to periodically update you on altitude once a minute: “Altitude 3-9-1 Feet”.   And, you can also program a low voltage warning “WARNING- Voltage 12-point-5 Volts”.    Voice alerts can be combined with your camera’s microphone, so you do not lose motor or other flight sounds when there are no alerts., Return to Home and Failsafe:, , Flight Simulator:, A built-in flight simulator is included, letting you fly the RADAR icon around the screen, controlling altitude, throttle and turns with your RC Radio. Since the control surfaces of your model will move at the same time, this feature makes it easier to configure Return to Home and test your alarms and settings, and is also fun on rainy days!, Waypoints:, Up to 3 waypoints (within visual range of the takeoff point) can be programmed into the OSD Pro, for aerial photography or just for fun.   The locations of the waypoints are displayed on the RADAR display,

The OSD Pro is a powerful, modular, fully configurable Video/Audio ...

ngHobbies

AEROSIM RC TRAINING SIMULATOR

Features:, - Very realistic flight characteristics. The flight performance and physics of the models is very realistic - this usually is found only at a much higher priced simulators., See it in action here:, AeroSIM RC - Simulador Aeromodelismo Radio Control Flight Simulator, Download the trial version:, Click here,

The AeroSIM RC is the first simulator which was developed ...

ngHobbies

GPS EXTERNAL ANTENNA

The Expander will pick between the strongest of the two signals (from the built-in antenna or this External Antenna) which can improve reception if your model is upside down, etc. Includes cable with MMCX jack. NOTE: if you have our older GPS module (not GPS-5HZ) please check to make sure it has the gold MMCX connector protruding from the red heatshrink., Manual:, eLogger Manual,

External Active Antenna for GPS Expander Module. This tiny external ...

ngHobbies

NGH EV-622A

There are different charging modes for all requirementsCharging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc.

Features:, Input Voltage range:, 11V-18V, Charging current range:, 0.1A - 10A, Charge power limit:, Max. 200W, Discharge power limit:, 25W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-18cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-6 cell, Pb battery voltage:, 2-24V, Weight:, 510g, Dimensions:, 145x98x30mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor,

The EV-622A is a low cost high preformance Li-Po, Li-Ion, ...

ngHobbies

NGH V680AC

There are different charging modes for all requirementsCharging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc.

Features:, Input Voltage range:, DC: 11V-18V, AC: 110/240V, Charging current range:, 0.1A - 6A, Charge power limit:, Max. 80W, Discharge power limit:, 10W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-18cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-6 cell, Pb battery voltage:, 2-24V, Weight:, 640g, Dimensions:, 145x145x56mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor, USB,

The V680AC is a low cost high preformance Li-Po, Li-Ion, ...

ngHobbies

NGH EV-815A

There are different charging modes for all requirementsCharging-Auto/Balance, Fast charging cycle, Charging for storage, Cyclic charging, etc.

Features:, Input Voltage range:, 11V-18V, Charging current range:, 0.1A - 7A, Charge power limit:, Max. 150W, Discharge power limit:, 25W, Balancing current:, max 300mA, NiCd/NiMH cell count:, 1-26cells, Lithium battery types:, Li-Po, Li-Ion, Li-Fe, Lithium battery cell count:, 1-8 cell, Pb battery voltage:, 2-36V, Weight:, 510g, Dimensions:, 145x98x30mm, Model Memory:, 5, Ports:, DC input, Balancing Port, Output port, Temperature sensor,

The EV-815A is a low cost high preformance Li-Po, Li-Ion, ...

ngHobbies

MIKROKOPTER BASIKSET OKTO XL

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-OktoXL
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER BASIKSET HEXA XL

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-HexaXL
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER QUADRO XL

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-Quadro
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER BASIKSET L4-ME

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included in this kit.
http//www.mikrokopter.de/ucwiki/en/MK-Quadro?action=show&redirect=en%2Fassembly
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, 1 x preassembled FlightCtrl ME V2.1 with Altitude Sensor, Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER BASIKSET HEXA 2

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-Hexa
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER BASIKSET OKTO 2-26

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-Okto
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

MIKROKOPTER BASIKSET OKTO

http//www.nghobbies.com/cart/index.php?main_page=page&id=23
NoteThere is NO battery included with this kit.
http//www.mikrokopter.de/ucwiki/en/MK-Okto
http//www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started
http//www.mikrokopter.com/ucwiki/en/FlightCtrlManual
http//www.mikrokopter.com/ucwiki/en/BrushlessCtrl
http//www.mikrokopter.com/ucwiki/en/SerCon
http//www.mikrokopter.com/ucwiki/en/ElectronicConnections
http//www.mikrokopter.com/ucwiki/en/MikroKopter-Tool
http//www.mikrokopter.de
http//forum.mikrokopter.de/forum-17.html

NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,

pre-order only . We will order this when you place ...

ngHobbies

VECTOR FLIGHT CONTROLLER + OSD WITH DEANS

• FIXED WING and MULTIROTOR Flight Controller with GPS modes and RTH ◦Fixed wingTraditional fixed wing, Elevon, and V-tail planes
◦ MultirotorTricopter, Quadcopter, and Hexacopter
• COMPATIBLEPCM, SPPM and S.BUS receiver support, with 4 types of RSSI
• FLEXIBLEfly with or without your FPV equipment
• REDUCED WIRINGinnovative wire harness with power distribution simplifies hookup
http//www.rcgroups.com/forums/showthread.php?t=2032857
http//fpvlab.com/forums/showthread.php?22260-Vector-FPV-Controller-Everything-we-ve-all-dreamed-about
http//eagletreesystems.com/Manuals/vector.pdf
http//www.eagletreesystems.com/index.php?route=product/product&product_id=136

Years in the making, and built from the ground up with simplicity in mind, the Vector has everything we hobbyists have dreamed about for our recreational FPV models, in one small, lightweight easy to use product:, • SIMPLE to set up and operate "out of the box" for both fixed wing and multirotor, with no PC required, Join the online Vector discussion:, :, :,

• Built-in OSD with COLOR GRAPHICS! ◦OSD display is fully ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby