RCModelScout.

BevRC

FY-41AP LITE FOR FIXED WING AIRPLANE

Product including :, 1. FY-41AP-Lite Module, Flight stabilization is achieved via an integrated 3 axis gyro, 3 axis accelerometer and a barometric pressure sensor. This enables the module to accurately measure flight attitude, earth azimuth & relative altitude to achieve:, - Extremely stable conventional flight pattern, Feiyu tech kindly remind you: You should to do the firmware upgrade separately for FY-41AP Lite control module and OSD module . UART1 is the interface connects to the data radio, computer serial port to do the firmware upgrade for FY-41AP Lite control module.If you want to upgrade the firmware of FY-41AP Lite OSD module,please click on here, Integrated OSD Video Overlay System, FY-41AP Lite overlays flight telemetry information onto video image. Information displayed includes: Altitude, Speed, Direction, Home Direction and many more.,

ReadyMadeRC

AIMDROIX EVO ONE - Y6

Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., Y6 Specs:, -Aprox frame,

ReadyMadeRC

AIMDROIX EVO ONE - QUAD/X8 MULTIROTOR FRAME

Frame configurations:, The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately., Main Frame and landing gear:, The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes., Camera mounting system:, The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications., Designed for the Aimdroix Aluminum Arms:, The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market., Key Features:, -Innovative vibration isolated camera system., QUAD Specs:,

HobbyKing

FUTABA 12FGH PCM G3 2048 W/R6014HS 2.4GHZ RECEIVER (MODE 1)

,

HobbyKing

ORANGERX R410 SPEKTRUM DSM2 COMPATIBLE 4CH 2.4GHZ RECEIVER

NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,

HobbyKing

SPARTAN FUTABA 512K ULTRA-PAC-II

The UltraPAC range of memory modules is fully compatible with the following transmitter sets:, Futaba 9Z, 9ZWC, 9ZWC2 (a.k.a. ZAP/ZHP), Features:, Equipped with a large memory capacity giving you the equivalent of up to eight individual 64K CAMPacs,

HobbyKing

EAGLETREE HEAVY DUTY E-LOGGER V4 WITH WIRE LEADS, 80 VOLTS, 150 AMPS

NEW: Eagle Tree continues to innovate in data collection with the eLogger V4. In addition to greatly enhanced resolution and accuracy, the V4 now supports voltage to 80 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!, Here are the key features of the MicroPower:, Logs pack current to +/- 100 amps and voltage from about 4.5 volts to 45 volts, NEW: Accepts optional inexpensive sensors for Temperature, RPM (brushless, magnetic or optical), GPS, Airspeed, Altitude, Servo Current, Throttle Movement, and more, available below,

HobbyKing

HITEC HS-225MG MIGHTY MINI SERVO 3.9KG/31G/0.14SEC

Specifications:,

HobbyKing

SKYFUN JET (KIT ONLY)

Specification:, Dry Weight:, 302g (No Electronics), Motor:, 28xx-1800kv Brushless Outrunner (Required), Required:, 28xx-1800kv Brushless Outrunner, Note:, For a more powerful setup try the following.,

LowPriceRC

IRODA SOLDER PRO 50 30W-70W

,

HobbyKing

ORANGERX R910 SPEKTRUM DSM2 9CH 2.4GHZ TWINPORT RX

NOTE:, 1) Accepted by the MAAA in Australia, see the MAAA MOP58 for guidance,

R2Hobbies

EAGLE TREE ELOGGER V3 WITH WITH WIRE LEADS, 70 VOLTS, 150 AMPS (MPRV3-LEADS-150)

R2Hobbies

EAGLE TREE ELOGGER V3 WITH INTEGRATED CONNECTORS, 70 VOLTS, 100 AMPS (MPRV3-CONN-100)

R2Hobbies

1/10 RC GP 4WD .15 ENGINE RTR OFF-ROAD RACING MONSTER TRUCK BUGGY

LowPriceRC

LIPO SAFE GUARD BATTERY CHARGING OR STORAGE BAG (SMALL)

,