Flying-Hobby
BERG 7P PROGRAMMABLE RECEIVER(72MHZ)
| Outputs | 1-2-3-4-5-6-7 |
| Channels | Any 7 of channels 1-9 |
| Filtering | Triple tuned RF circuitry |
| Filtering | Steep flank 8 pole IF ceramic filter set |
| Filtering | True DSP filtering in the microprocessor decoder with adaptive |
| Sensitivity | Better than 1.2uV |
| Size | 85 x 1.25 x .5" |
| Weight | (w/wires) .28 oz (8g) |
| Crystal | Berg Micro ONLY |
Additional Features:, Programmable Fail Safe, *Note: If a similar transmitter on the same channel is powered up and is CLOSER to your receiver than your own transmitter, loss of signal/fail safe may be experienced., No. of channels : 7,
Berg 7P Programmable Receiver The standard of excellence in receiver ...Flying-Hobby
KDE DIRECT 450XF-3500 HP BRUSHLESS MOTOR, 3500KV (450-CLASS)
| Maximum Power | 1,200+ W |
| Continuous Power | 725+ W |
| Maximum Efficiency | 90% |
| Optimized Voltage | 11.1 V (3S) |
| Io (@10V) | 3.6 A |
| Rm (Wind Resistance) | 0.009 Ω |
| Magnetic Poles | 8, 12S8P |
| Bearings | Quad, 696ZZ/MR106ZZ |
| Stator Class | 2618, 2D |
| Shaft Length | 18.5mm |
| Motor Diameter | 33mm |
| Motor Length | 36mm |
| Connectors | 4.0mm, 24k Bullets |
| ESC PWM Rate | 12 - 16 KHz |
Specifications:, Kv:3,500 rpm/V, Voltage Range:, 11.1 V (3S) - 14.8 V (4S), Mount Pattern:, M3 x 19mm, M2.5 x 16mm, Shaft Diameter:, 3.5mm (4mm Internal), Motor Weight:, 105 g (115 g with Wires/Bullets), Cooling System:, High-Volume Radial Fan,
This is the KDE Direct 450XF-3500 High Performance Brushless 450 ...Flying-Hobby
PHOENIX EDGE 130 HV (32V 130 AMP) BRUSHLESS ESC
| MIN | 2S LiPo MAX |
Helis:, 550 Class, or 600 Class (use external BEC or RX/servo power source; not included), Fixed wing:, 1.20, Input voltage:, Max continuous amperage at full throttle:, , BEC voltage (voltage regulator for powering radio and sevos):, User selectable choice from 5 to 8.4 volt output, BEC output amperage:, , Width:, 2.0" (50.8mm), Length:, 3.3" (83.6mm), Height:, 0.9" (23.2mm), Weight w/wires:, 5.3 oz (150.6g), Weight w/o wires:, 3.0 oz (86.6g), Programmability:, Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software., Connectors:, , Tools needed for installation:, Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.,
Product description Applications Technical Specs 130 amps* 5 amp peak** ...Flying-Hobby
PHOENIX ICE2 80A HV BRUSHLESS ESC
| ●Surge current | 80Amps |
| ●Supporting motor types | 2 poles to 10+poles in/outrunner brushless motors |
| ●Max Supporting input voltage | 50v(12s Li-Po/36 cells Nicad/NiMH) |
| ●Size | 71.12X33X22.9mm |
| ●Weight | 107.7g(With wires) |
| NOTE | Not including BEC. User need to provide the power for receiver and servo. |
Instructions:, Fearture:, ●Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card., Specification:,
●Comprehensive heli feature set, including direct entry governor mode, autorotation ...Flying-Hobby
SBEC 10A SWITCHING REGULATOR
| Current Output | Peak |
| Continuous | <12 volts input = 7 amps* |
| Length | 1.2” (30mm) |
| Width | 0.6” (15mm) |
| Height | 0.4” (10mm) |
| Weight | 11g |
Output Voltage:, Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately)., Input Voltage:, 5v to 25.2v (2S to 6S LiPo),
<24 volts input = 5 amps**Ratings are determined with a ...Flying-Hobby
MIKADO LOGO 600 3D ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor diameter | 1250mm to 1450mm |
| - Rotor blades | 600/620/650mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 6S to 10S LiPoly |
| pinion | MIK4412 12 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive80HV or Casle Creations Ice 80 HV |
| Battery | 10cell 5000MAH |
Super light, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, - Considerably more transmission efficiency - Very smooth running - Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560, Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600 V-Bar Flybarless version kit. We’ve ...Flying-Hobby
CAPACITOR PACK (12S MAX, 50.0V, 1100UF)
Helis:, CC CapPack is highly recommended for all 500 class and larger heli applications where Y harnesses and long wires can bleed voltage and hard collective pulls can strain even the most powerful batteries., Cars/Trucks:, With their high torque requirements – going from 0 to 100% throttle isn't easy on controllers or batteries - RC cars and trucks put enormous loads on brushless power systems. Use CC CapPack to help your system power through the abuse., Aircraft:, Larger electric power systems lead to larger electric powered aircraft, and sometimes the distance between the battery pack and the ESC grows beyond the length of the wires installed on the components. Adding wire also adds inductance, which can increase the ripple voltage in a system. CC CapPack essentially negates the ripple caused by the addition of up to 8 inches of length to the battery wires., Note: All Castle controllers with data logging capabilities can report the ripple voltage they encounter during use. Ripple voltage peaks should always be less than 10% of the total pack voltage; the smaller the ripple voltage the better. If an application exhibits more than 10% ripple voltage under peak loads, the user should consider using higher discharge (C Rating) batteries, shorter wires, higher current connectors, better gearing or a smaller load.,
CC CapPack is useful in all brushless motor applications, where ...Flying-Hobby
MIKADO LOGO 600SE ELECTRIC HELICOPTER KIT - FBL OPTIONS
| Specifications | - Motor mount |
| - Rotor Blades | 600mm to 690mm |
| - Main gear ratio | 8,1 |
| - Weight | 3,2 kg and up |
| - Battery | 8S to 10S LiPoly |
| pinion | MIK4411 11 tooth |
| Cyclic servos | FutabaBLS 451 or JR 8717 or BLS 253 |
| Tail Servo | Futaba BLS 251 or JR 8900G |
| ESC | Kontronics Jive120HV or Casle Creations Ice 160 HV |
| Battery | 10cells or 12cells 5000MAH |
Superlight, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., The main advantages of the new Herringbone gear design are:, - Considerably more transmission efficiency, Very smooth running, Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560(10cell) or xera-4030-560 (10cells), Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,
This is the Logo 600SE V-Bar Flybarless version kit. The ...Flying-Hobby
T-REX 600E PRO DFC FUTABA 6J 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
T-REX 600E PRO DFC + APS(UAV) COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, , Specification(3GX Programmable Flybarless System) :, , Specification(T-REX 600E PRO DFC) :, , Specification(T-REX 600E PRO DFC) :, , ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, , Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC Kit 1 Castle ICE2 HV 80 ...Flying-Hobby
USB COMPUTER PROGRAMMING KIT FOR PHOENIX CONTROLLERS
,
Is "stick" programming your Phoenix brushless controller getting old? Can't ...Flying-Hobby
T-REX 600E PRO DFC SUPER COMBO + APLUS 65C BATTERY
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...Flying-Hobby
T-REX 600E PRO DFC SUPER COMBO (WITH 3GX)
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, , Specification(3GX Programmable Flybarless System) :, , Specification(T-REX 600E PRO DFC) :, , Specification(T-REX 600E PRO DFC) :, , ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, , Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
●Brand new redesigned 3GX represents a new generation of multi ...Flying-Hobby
T-REX 600E PRO DFC FUTABA 8J 2.4G RTF COMBO
| ●Operating Temperature | -10~60 degree |
| ●X and Y axis Operating Angle Range | -300~+300 degree |
| ●Z axis Operating Angle Range | -600~+600 degree |
| ●Size | 36.5x25.2x15.6 mm Size |
| ●Maximum working voltage | 8.5V |
| ● Length | 1174mm |
| ● Height | 319mm |
| ● Width | 210mm |
| ● Main Blade Length | 600mm |
| ● Main Rotor Diameter | 1347mm |
| ● Tail Rotor Diameter | 260mm |
| ● Motor Drive Gear | 13T |
| ● Main Drive Gear | 112T |
| ● Autorotation Tail Drive Gear | 131T |
| ● Tail Drive Gear | 34T |
| ● Weight(With Motor) | 2290g |
Instruction(3GX Programmable Flybarless System) :, ●Brand new redesigned 3GX represents a new generation of multi function flybarless system. The dramatically improved performance will create immediate impact on any enthusiasts., Specification(3GX Programmable Flybarless System) :, Specification(T-REX 600E PRO DFC) :, ●Features, Specification(T-REX 600E PRO DFC) :, ● Drive Gear Ratio: 1:8.61:3.85, Accessories:, ●T-REX 600E PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),
T-REX 600E PRO DFC 1 Castle ICE2 HV 80 Brushless ...