ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
PARKZONE ARCHER BNF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | AR400 4-channel receiver (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...ReadyMadeRC
PARKZONE - MOSQUITO MK VI BNF PKZ6350
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
C-RAY 180 PNP
| Wingspan | 21.7 in (550mm) |
| Overall Length | 13.5 in (342mm) |
| Wing Area | 126 sq. in. (8.05 sq. dm.) |
| Flying Weight | 4.40 oz (125 g) |
| Motor Size | 180-size, 2500Kv brushless outrunner (installed) |
| Radio | 4+ channel transmitter with elevon mixing |
| Servos | (2) 3-gram super sub-micro servos (installed) |
| CG (center of gravity) | 3/4 in (18mm) in front of the forward edge of the servo casing |
| Prop Size | 4.5 x 4 electric propeller (installed) |
| Speed Control | 3-amp brushless (installed) |
| Recommended Battery | 7.4V 2S 430–450mAh LiPo battery (required) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
Is Assembly Required: No,
Features Fully assembled and hinged with control horns and pushrods ...ReadyMadeRC
UMX BEAST 3D BNF BASIC
| Wingspan | 14.7 in (374mm) |
| Overall Length | 15.7 in (400mm) |
| Wing Area | 83.8 sq in (54.2 sq dm) |
| Flying Weight | 2.54 oz (72 g) |
| Motor Size | BL180 2500Kv brushless outrunner |
| Radio | 4-channel minimum |
| Trim Scheme Colors | Black, Red, Silver |
| CG (center of gravity) | 19mm back from leading edge of bottom wing |
| Wing Loading | 3.4 oz/sq ft (1.01 g/sq dm) |
| Prop Size | 5 x 2.75 inch |
| Recommended Battery | 2S 7.4V 180mAh Li-Po |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Approx. Flying Duration | 5 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Indoor/Outdoor |
Is Assembly Required: No,
Seize the UMX™ Beast® 3D, Equipped with AS3X® Technology, and ...ReadyMadeRC
APPRENTICE S 15E RTF WITH SAFE EFL3100
| Wingspan | 59.0 in (1500mm) |
| Overall Length | 42.5 in (1080mm) |
| Wing Area | 515 sq. in. (33.2 sq. dm.) |
| Flying Weight | 49.0 oz (1390 g) |
| Motor Size | 15-size brushless outrunner |
| Radio | Spektrum DX5e transmitter (included) |
| CG (center of gravity) | 3-1/8 in (79.0mm) back from the leading edge of wing |
| Prop Size | 11 x 8 |
| Speed Control | 30-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 3200mAh LiPo (included) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Charger | 2–3S LiPo balancing charger, 0.5–3.0A (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features SAFE™ technology provides spatial awareness and flight envelope protection ...ReadyMadeRC
MOSQUITO MK VI PNP
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE ARCHER RTF
| Wingspan | 36.8 in (935mm) |
| Overall Length | 25.6 in (650mm) |
| Flying Weight | 16.4 oz (466 g) |
| Motor Size | 370-size 1300Kv brushless outrunner (installed) |
| Radio | DX4e 4-channel transmitter (included) |
| Servos | SV80 servos (installed) |
| Trim Scheme Colors | Red, grey, black and white |
| CG (center of gravity) | 1.6 in (40mm) back from the leading edge of wing |
| Prop Size | 8.25 x 5.5 |
| Spinner Size | 1.0 in (25mm) |
| Speed Control | 10-amp (installed) |
| Recommended Battery | 7.4V 2S 1300mAh 20C Li-Po (included) |
| Charger | 2S DC Li-Po balancing charger (included) |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
Flaps: No, Retracts: No,
Features 4-channel control—throttle, elevator, aileron and rudder Powerful 370-size, 1300Kv ...HobbyKing
TURNIGY MICRO BATTERY CHARGING BOX
Input Power:, Max Charge Current:, Charge Voltage:, Weight:, Dimensions:,
Turnigy makes micro battery charging a breeze with their new ...ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...ReadyMadeRC
BLADE - 180 QX HD BNF WITH SAFE BLH7480A
| Type | Quad-Copter |
| Main Rotor Diameter | 14.0 in (355mm) |
| Gross Weight | 3.35 oz (95 g) |
| Length | 11.5 in (292mm) |
| Motor Size | (4) 8.5mm brushed |
| Kit/ARF/RTF | RTF |
| Minimum Age Recommendation | 14 years |
| Experience Level | Beginner |
| Recommended Environment | Indoor/Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |