ReadyMadeRC
QAV500 FPV QUADCOPTER FRAME V1.2
| NOTE | Landing Gear not included! |
ReadyMadeRC
PRO TRICOPTER DELRIN KIT V1.2
| Frame parts made from precision laser cut Delrin | 3 Motor mounts, complete Yaw mechanism, 2 main body frame parts |
| . Kit frame and motor mounts | 150g, kit hardware |
| Includes all frame and motor mounting hardware | screws, nuts, ball bearings, servo to motor pushrod using ball links, Yaw axle, and stand-offs |
Weight:, Fully flight ready built kit with all electronics, flight controller, motors, escs (without battery) weighs,
Quick Overview The v1.2 Pro Tricopter Delrin Kit by fpvmanuals ...ReadyMadeRC
FY-91Q NAVIGATION EDITION WITH COMPASS AND GPS
,
FY91Q MULTI ROTOR SYSTEM Basics on how the system works: ...ReadyMadeRC
FY-30A ORANGE INERTIAL FLIGHT STABILIZATION SYSTEM
,
GREAT NEW FEATURE! The FY30A can now also control multi-rotor ...ReadyMadeRC
8 CHANNEL SERIALIZER PWM TO PPM ENCODER
,
This serializer, also called a "PWM to PPM encoder" allows ...ReadyMadeRC
12 CHANNEL SERIALIZER PWM TO PPM ENCODER
,
This serializer, also called a "PWM to PPM encoder" allows ...ReadyMadeRC
1.3GHZ RECEIVER W/SAW UPGRADE (V3 WITH 1258 MHZ!)
| Excellent filtering | won't get interference from UHF LRS systems like some of the other receivers do. |
| CH1 | 1258 MHz |
| CH2 | 1280 MHz |
| CH3 | 1320 |
| CH4 | 1360 |
Frequencies:, ,
Known as being one of the best quality receivers, now ...ReadyMadeRC
1.3GHZ RECEIVER (V3 WITH 1258 MHZ!)
| Excellent filtering | won't get interference from UHF LRS systems like some of the other receivers do. |
| CH1 | 1258 MHz |
| CH2 | 1280 MHz |
| CH3 | 1320 |
| CH4 | 1360 |
Frequencies:, ,
Known as being one of the best quality receivers, now ...ReadyMadeRC
LOW PASS FILTER FOR 900MHZ ANTENNAS
| Features | Low insertion loss |
ReadyMadeRC
5V REGULATOR WITH A/V PASS-THROUGH 6-17V INPUT
| Input Voltage Range | 6-17VDC |
| Output Voltage | 5V 500mA Max |
| Size | 38mm x 17mm x 10mm |
Specs:, , Weight: 4g,
This custom Ready Made RC, LLC power adapter can help ...ReadyMadeRC
CAMERA/TRANSMITTER CABLE COMBO WITH OSD CABLE OPTIONS
Below is a list for compatibility of the various camera and transmitter cables:, , Transmitter Cables:,
Take out the guesswork and get a better deal by ...ReadyMadeRC
G-FORCE MICROSENSOR - HIGH G SENSOR
| Resolution | approx. 0.05 G in each axis |
| Power input (Standalone Mode) | 4V to 16V (6V max for High G Sensor) |
| Weight | approximately 4 grams (0.15 oz) |
| Dimensions | approximately 28 mm x 16 mm x 10 mm (1.1” x 0.62” x 0.4”) |
ReadyMadeRC
LC COMMON MODE POWER FILTER
| Revision | Rev3 March 2013 |
| Type | passive common-mode low-pass power ripple filter |
| Modes | common mode, single mode - jumper selectable |
| Maximum voltage | 16V DC |
| Maximum current | ~1.5A |
| Cutoff frequency at -3dB | 127 Hz (attenuates higher frequencies/noise) |
| Voltage drop over filter | 180mV at 900mA |
| Maximum voltage ripple | 120mV |
| Capacitor | Japanese Polymer Capacitor |
| Impedance/ESR | 0.012 Ohm at 100kHz/16V |
| Ripple current | 5000mA rms |
| Choke | German Common-mode Choke |
| Series resistance (DC) | 0.205 Ohm/path |
| Wire / trace thickness | twisted 22 AWG / 32 mils |
| Operating temperature | -40 °C to +105 °C |
| Dimensions | 37.7 L x 8.8 W x 14.5 H mm |
| Weight | 8.1 grams (inc. JST connectors) |
Specifications:,
LC power filter - LPF-01 LPF-01 LC Power Filter This ...ReadyMadeRC
RCA MALE TO RMRC SERVO STYLE CONNECTOR
,
This will help you to connect a standard video source ...