RCPlanet
KYOSHO PURT GP FAZER R/S MCLAREN F1 GTR (W/2.4GHZ) KYO31398S-B
, Scale:, 1/10, Length:, 383mm (15.0in), Width:, 200mm (7.8in), Height:, 92mm (3.6in), Wheelbase:, 260mm (10.2in), Weight:, 1,775g (14.6lb), Engine:, GZ-15 with pull start (Nitro), ,
Kyosho, does it again! GP powered 10th scale sedan at ...RCPlanet
KYOSHO PURT GP FAZER R/S ASTON MARTIN DBR9 2008 (W/2.4GHZ) KYO31399S-B
, Scale:, 1/10, Length:, 383mm (15.0in), Width:, 200mm (7.8in), Height:, 92mm (3.6in), Wheelbase:, 260mm (10.2in), Weight:, 1,775g (14.6lb), Engine:, GZ-15 with pull start (Nitro), ,
Kyosho, does it again! GP powered 10th scale sedan at ...RCPlanet
KYOSHO INFERNO NEO TYPE-1 WITH KT-200 KYO31295T1B
, Scale:, 1/8, Length:, 469mm (18.4in), Width:, 307mm (12in), Height:, 189mm (7.4in), Wheelbase:, 325.5 (12.8in), Gear Ration:, 11.704:1, Weight:, 3,400g, Engine:, GX21BK, ,
With an unrivalled record of 8 titles at the bi-annual ...RCPlanet
KYOSHO INFERNO GT2 RACE SPEC ASTON MARTIN RACING DBR9 NO. 53 KYO31834B
| 1st 10.14 | 1, 2nd 7.90 |
, Length:, 515mm, Width:, 310mm, Height:, 135mm, Wheelbase:, 360mm, Tread (F/R):, 262mm?265mm, Tire (F/R):, 97×40mm, Gear Ratio:, Weight:, 3,650g (approx.), Engine:, KE25, R/C System:, KT-201, ,
This is the Kyosho Inferno GT2 Race Spec Aston Martin ...RCPlanet
HPI SLIDE CARBURETOR COMPLETE NITRO STAR K4.6 HPI15260
, Inlet Diameter:, 0.55" (14mm), Base Diameter:, 0.59" (15mm), Length:, 2.4" (62mm) with throttle extended, Height:, 1.1" (28.5mm) when installed on engine, ,
HPI Racing slide valve carburetor has composite construction and three ...RCPlanet
HPI RACING 1/8 SAVAGE X 4.6 RTR TRUCK WITH 2.4GHZ TRANSMITTER HPI109083
, Length:, 534 mm, Width:, 427 mm, Height:, 254 mm, Wheelbase:, 336.5 mm, Tires:, 159 x 85.5 mm, Suspension travel:, 152 mm, Engine:, Big Block 4.6cc, Transmission:, 2-Speed, Drivetrain:, Full-Time 4WD, ,
This is the 1/8 scale HPI Savage X 4.6 RTR ...RCPlanet
HPI NITRO STAR .21 BB PULL START HPI1401
, Displacement:, 3.44cc (0.21 ci. in.), Weight, w/Savage mount:, 490 grams (17.28 ounces), Distance/cylinder head to bottom of mounting flanges:, 3.86" (98mm), Distance/top of cylinder head to bottom of crankcase:, 4.41" (112mm), Crankcase mount hole spacing, front to rear:, 0.83" (21mm), Crankcase mount hole spacing, left to right:, 1.46" (37mm), Savage engine mount bolt hole spacing:, 1.575"(40mm) x 1.807" (46mm), ,
HPI Racing Nitro Star .21 engine w/pullstart from HPI. It ...RCPlanet
GREAT PLANES PETE 'N POKE SPORT 40 KIT .40 GPMA0493
, Wingspan:, 59.5" (1510mm), Wing Area:, 809.2 sq in (52.2 sq dm), Weight:, 5.75lb (2.6kg), Length:, 47" (1195mm), Wing Loading:, 16.4oz/sq ft (50g/sq dm), Airfoil:, Flat Bottom, High Wing, Center of Gravity:, 3-7/8" (98mm) back from the leading edge of the wing, Control Throws, High Rate, Ailerons:, Up & Down 1" (25mm), Elevator:, Up & Down 1½" (38mm), Rudder:, Right & Left 1½" (38mm), Low Rate, Ailerons:, Up & Down 3/4" (19mm), Elevator:, Up & Down 3/4" (19mm), Rudder:, Right & Left 1" (25mm), Incidence, Engine:, 3° right thrust and 3° down thrust, Wing:, 1° positive, Stabilizer:, 0°, ,
Great Planes Pete-N-Poke Sport, slow 'n easy... with a touch ...RCPlanet
GREAT PLANES SUPER STEARMAN 1.20 BIPE ARF .91-1.2,71.5" GPMA1350
| Elevator | Up & Down |
| Rudder | Right & Left |
| Elevator | Up & Down |
| Rudder | Right & Left |
| Engine Thrust | Down |
, Top Wingspan:, 71.5" (1815mm), Bottom Wingspan:, 69" (1755mm), Total Wing Area:, 1466 sq in (94.70 sq dm), Weight:, 14-15lb (6.35-6.8kg), Wing Loading:, 22-23.5 oz/sq ft (67.13-71.71g/sq dm), Length:, 57" (1450mm), Airfoil:, Semi-symmetrical, Center of Gravity:, 5.50" (140mm) Back from the leading edge of the TOP wing, Control Throws, Ailerons:, Up & Down, Low Rate, Bottom Wing:, 9/16" (14mm), Top Wing:, .75" (19mm) up, Top Wing:, 7/8" (22mm) down, 7/8" (22mm), 1" (25mm), High Rate, Bottom Wing:, 1" (25mm), Top Wing:, 1.25" (32mm) up, Top Wing:, 1.50" (38mm) down, 1" (25mm), 1.50" (38mm), Incidences:, Top and bottom wing:, 0°, Stabilizer:, 0°, 1°, Right:, 3°, ,
The Great Planes Super Stearman has long been considered the ...RCPlanet
GREAT PLANES RV-4 40 SPORT KIT .40-.52,54.65" GPMA0180
, Wingspan:, 54.65" (1388mm), Wing Area:, 631.6 sq in (40.8 sq dm), Weight:, 5.75 - 6.25 lb (2.6-2.8 kg), Wing Loading:, 20.9 - 22.8 oz/sq ft (64.1 - 69.7 g/sq dm), Length:, 49.6" (1260mm), Airfoil:, semi-symmetrical, Low-Wing, Selig 8036, Center of gravity:, 3¾" (95mm) back from the wing's leading edge at the fuselage sides, Control Throws, Low Rate, Ailerons:, Up & Down 1/2" (13mm), Elevator:, Up & Down 1/4" (7mm), Rudder:, Right & Left 7/8" (22mm), Flaps:, Down 1/2" (13mm), High Rate, Ailerons:, Up & Down 3/4" (19mm), Elevator:, Up & Down 5/8" (16mm), Rudder:, Right & Left 1-1/16" (27mm), Flaps:, Down 1" (25mm), Incidence, Engine down thrust:, 2°, Wing:, positive 2°, Stabilizer:, 0°, ,
Great Planes homebuilt "hot rod" as a smooth-flying .40! While ...RCPlanet
GREAT PLANES ULTRA SPORT 40 KIT GPMA0410
, Wingspan:, 55", Wing Area:, 566 sq in, Length:, 49-1/2", Weight:, 6 lbs, Wing Loading:, 24 oz/sq ft, Optional:, retract landing gear, Center of Gravity:, 4" back from the leading edge, Degrees Incidence, Engine Thrust:, 2 right, Stabilizer:, 0, Wing:, 0, Control Throws, High, Elevator:, 5/8" up 1/2" down, Rudder:, 1-3/8", Ailerons:, 1/4", Low, Elevator:, 3/8" up 5/16" down, Rudder:, 7/8", Ailerons:, 1/8", ,
This is the Great Planes Ultra Sport 40 Airplane Kit. ...RCPlanet
GREAT PLANES U-CAN-DO 3D 60 ARF GPMA1270
, Wingspan:, 65" (1651mm), Wing Area:, 1072 sq in (69 sq dm), Weight:, 7-7.3lb (3175-3345g), Wing Loading:, 15-15.9 oz/sq ft (46-48 g/sq dm), Length:, 69.5" (1765mm), Airfoil:, Fully-symmetrical mid-wing, Center of Gravity:, 4-7/8" (124mm) Back from the wing's leading edge, Control Throws (3D), Elevator:, Up & Down 3" (75mm), Rudder:, Right to Left 4" (102mm), Ailerons:, Up & Down 2-1/8" (55mm), Flaperons:, Up & Down 2" (51mm) assigned to a switch, not mixed to the elevator, Expo for 3D Rates-no mixing other than expo, Elevators:, -20%, Rudder:, -20%, Ailerons:, -20%, Incidence, Wing:, 0°, Stab:, 0°, Engine:, 1.5° down, 1° right, ,
Great Planes U-Can-Do 3D is a big aerobatic fun for ...RCPlanet
APC PROPELLERS LP20012 20X12 PROPELLER APCLP20012
, Prop Diameter:, 20", Prop Pitch:, 12, Hub Thickness:, 0.50", Weight:, 0.035lbs, Engine Shaft Diameter:, 21/64", ,
APC props are manufactured using a pultrusion process. This method ...RCPlanet
APC PROPELLERS LP18010 18X10 PROPELLER APCLP18010
, Prop Diameter:, 18", Prop Pitch:, 10, Hub Thickness:, 0.40", Hub Diameter:, 0.8", Weight:, 0.047lbs, Engine Shaft Diameter:, 1/4", ,
APC props are manufactured using a pultrusion process. This method ...RCPlanet
THS RACING MANIFOLD HARD COATED W/SPRINGS & SEALS JATO THPTHS144HM
, Inner Diameter Pipe Side:, 17mm, Inner Diameter Engine Side:, 16mm, ,
This is the THS Racing Hard Coated Manifold for the ...