SDSHobby
6STAR 3IN/76MM SPECIAL DRILLED CNC ANODIZED ALUMINUM ALLOY SPINNER FOR DLE30 DLE50 EME55 MLD70 DLA64 ENGINES
| Height | 75mm |
| Diameter of Bottom Plate | 3in/76mm |
| Aperture of Bottom Plate | 10mm |
| Screw | M5*50mm(screw thread length |
Features:, Quick and easy installation:, 1), Specifications:, Application Fields:, 1, Engines:, Suitable for DLE30/35RA/40/50/55/55RA/60/61,, . Propellers:, Suitable for 18*6 to 20*10 propellers (such as, Worm Tips:, There are ±1mm tolerance for manual measurement, the following sizes are just for reference.,
Aluminum Alloy material. CNC and Anodized processed. Enough prop mounting ...SDSHobby
Z-MANIFOLD EXHAUST PIPE/BENT PIPE L175MM/ D16MM FOR RC BOAT NITRO ENGINE 21-25A
Application Fields:, RC Boat Nitro Engine 21-25A, Specification:, L1=175mm,
L2=60mm D1=16mm D2=16mmSDSHobby
2 SETS SPECIAL MUFFLER CANISTER FOR DLA112, DA100, DLE111, EME120, 80-120CC GAS ENGINE
Application:, These Mufflers can be assembled with DLA112, DA100, DLE111, EME120 80-120CC Engine. It can reduce noise when you fly the airplane., Package Contents:, Polished Aluminum Canister with aluminum alloy Header pipe,
Teflon couple with two spring clumpsSDSHobby
1:5 SCALE GASOLINES POWERED OFF-ROAD MONSTER RTR 053410 WITH 28CC ENGINE, 2.4G RADIO AND 4WD SYSTEM
| Length | 750mm |
| Width | 540mm |
| Height | 300mm |
| Wheelbase (F) | 538mm |
| Wheelbase (R) | 540mm |
| Thread (F/R) | 500mm/570mm |
| Wheel Diameter (F/R) | 200mm/110mm |
| Gear Rate | 11.4 |
| Engine | 28cc |
| Fuel Tank Capacity | 600cc |
| Remote Control System | 2.4G Radio |
| Receiver Battery | 4pcs*1.5V AA Battery |
| Servo | 20KG-cm Steering Servo, 20 KG-cm Throttle Servo |
Specifications:,
SDSHobby
ADJUSTABLE NITRO ENGINE MOUNT L92MM X H60MM
Specifications:, Application Fields:, suitable for nitro engines,
L1=92mm H=60mm L2=5mm L3=10mm L4=48.5mm D1=5mmSDSHobby
AUTOMATIC ADVANCING ANGLE RCEXL SINGLE RC MODEL IGNITION FOR ZENOAH GAS ENGINE G45/G62 W/O BMR6A 90 DEGREE SPARK PLUG
| Application | Zenoah Gas Engine G45/G62 |
| Spark Plug | BPMR6A, 90 degree |
| Operating Voltage | 4.8-6V |
| Weight | 130g |
Specifications:, Included Spare Parts:,
Futaba Interface CDI*1pcs Tight Pipe*1pcs Small Aluminum Plate*1pcs Sensor Bracket*1pcsSDSHobby
AUTOMATIC ADVANCING ANGLE RCEXL SINGLE RC MODEL IGNITION FOR ZENOAH GAS ENGINE G26SC/ G26SLH/ G26SCM/ G26SLH W/O CM-6 90 DEGREE SPARK PLUG
| Application | Zenoah Gas Engine G26SC/ G26SLH/ G26SCM/ G26SLH |
| Spark Plug | CM-6, 90 degree |
| Operating Voltage | 4.8-6V |
| Weight | 130g |
Specifications:, Included Spare Parts:,
Futaba Interface CDI*1pcs Tight Pipe*1pcs Small Aluminum Plate*1pcs Sensor Bracket*1pcsSDSHobby
ORIGINAL BRAND USA MASTER 3 BLADES NYLON PROPELLER 16*8 FOR GAS/ NITRO ENGINES
Specifications:, Propeller Diameter:, 16inch/41cm, Pitch:, 8inch/20cm, Equipped with Prop Gaskets:, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm (inner diameter), Material:, nylon, Application:, used for gas engines and nitro engines, Features:,
Scale Look NACA Airfoils True Pitch Glass-Filled Nylon for Strength ...SDSHobby
GASKET FOR EXHAUST PIPE OF EME55, DLE50, DLE55, DA50, DLA56, GP50R, EME55-II GASOLINE ENGINES
Application Fields:, EME55, DLE50, DLE55, DA50, DLA56, GP50R, EME55-II Gasoline Engines,
SDSHobby
ORIGINAL BRAND USA MASTER 3 BLADES NYLON PROPELLER 15*7 FOR GAS/ NITRO ENGINES
Specifications:, Propeller Diameter:, 15inch/38cm, Pitch:, 7inch/18cm, Equipped with Prop Gaskets:, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm (inner diameter), Material:, nylon, Application:, used for gas engines and nitro engines, Features:,
Scale Look NACA Airfoils True Pitch Glass-Filled Nylon for Strength ...SDSHobby
ORIGINAL BRAND USA MASTER 3 BLADES NYLON PROPELLER 14*7 FOR GAS/ NITRO ENGINES
Specifications:, Propeller Diameter:, 14inch/35cm, Pitch:, 7inch/18cm, Equipped with Prop Gaskets:, 3mm, 4mm, 4.5mm, 5mm, 6mm, 8mm (inner diameter), Material:, nylon, Application:, used for gas engines and nitro engines, Features:,
Scale Look NACA Airfoils True Pitch Glass-Filled Nylon for Strength ...