ReadyMadeRC
MOSQUITO MK VI PNP
| Wingspan | 1244mm (49.0 in) |
| Overall Length | 955mm (37.6 in) |
| Flying Weight | 42.3 oz (1200 g), 44.4 oz (1260 g) with flaps servos and retracts installed |
| Motor Size | (2) 370-size brushless outunner |
| Radio | 4+ channel (6+ channel for optional retracts and flaps) required |
| Servos | (2) DSV130 and (2) SV80 servos (installed) |
| CG (center of gravity) | 2.90-3.30 (73-83mm) back from the leading edge of wing at fuselage |
| Prop Size | 8.25 x 5.5 |
| Speed Control | (2) 18-amp brushless (installed) |
| Recommended Battery | 11.1V 3S 2200mAh 25C LiPo (required) |
| Flaps | Optional (servo |
| Retracts | Optional (EFLG100) |
| Control Throw (Ailerons) | Low |
| Control Throw (Elevator) | Low |
| Control Throw (Rudder) | Low |
| Control Throw (Flaps) | Half |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
NIGHT VAPOR BNF
| Wingspan | 14.8 in ( |
| Overall Length | 15.3 in (389mm) |
| Flying Weight | 16.4 g (0.6 oz) |
| Prop Size | 140mm x 45mm |
| Recommended Battery | 70mAh 3.7V 14C Li-Po |
Is Assembly Required: No,
Like the original Vapor® aircraft, the Night Vapor™ model is ...ReadyMadeRC
GOPRO HERO 1&2 HOUSING - "DUO ADAPTER" FOR "SNAP" VERSION- BLACK
,
With this alternative front-plate you can mount a FPV-Cam in ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 12" (30CM) CABLE
| WEIGHT | 12 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 48" (125CM) CABLE
| WEIGHT | 25 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 6" (15CM) CABLE
| WEIGHT | 9 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 36" (90CM) CABLE
| WEIGHT | 19 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 24" (60CM) CABLE
| WEIGHT | 15 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
DRAGONLINK - RX ANTENNA WITH 1" (3CM) RIDGID CABLE
| WEIGHT | 8 Grams |
| ELEMENT LENGTH | 15 CM Each |
SPECIFICATIONS:, ,
This is a super high performance antenna for use with ...ReadyMadeRC
RMRC GOPRO MOUNT FOR DRQ250
Package includes:,
Custom 3D printed mount for the DRQ250 that fits the ...ReadyMadeRC
PHOENIX R/C PRO SIMULATOR V5.0
| Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8/DX10T/DX18 (No adapter required) - Note | The DX7se is not compatible with the simulator. |
Features:, , Overview:, Whenever weather, schedules or circumstances conspire to keep you from the flying field, scratch your flying itch with the latest Phoenix Professional RC Flight Simulator, version 5.0. Stunning graphics and incredibly realistic physics have made the Phoenix simulator not only one of the best desktop flight simulators, but a virtual RC experience with just about all the benefits of an RC club and flying field. This newest version features definitively refined physics plus new companion software you can use to create your own models, fly them and then share them online. It’s always a perfect time to fly with the Phoenix Professional RC Flight Simulator., Tech Notes:, To successfully use Phoenix, you will need the following:, • IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, • An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, • Boot Camp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., supported:,
Improved airplane physics rebuilt from the ground up, plus industry-leading ...ReadyMadeRC
EYEFLY - HAMMERHEAD NANO FRAME - G10 GLASS FIBER
| Motors | Tiger MT1306 |
| ESCs | 6A-10A |
| Control unit | CC3D |
| Propellers | GemFan or HQ 5" |
| Camera | FatShark 600tvl |
| Centerplates & motor mounts | 50g |
| Polyamide-parts | 20g |
| Arms | 19g |
| Screws, nuts, etc | 38g |
Our new frame, the "Hammerhead Nano" was designed with the following goals:, , Weight:, ,
The foldable "always-at-hand"-frame that will never leave your side! This ...ReadyMadeRC
SIS LABS - DETACH Y6 - FLIGHT CONTROLLER READY
,
Closeout - Please do NOT backorder! If you are looking ...ReadyMadeRC
VOLO ULTRA COMPACT LEDS - WHITE
| Emitting Colour | White |
| Voltage | 12V DC (3S LiPo suitable) |
| Size | 21mm x 7mm x 3.6mm (LxWxH) |
| Operating Temp | -40 to +100 degrees Centigrade |
| Chip technology | Cree PLCC4 SMD |
| Adhesive tape | 3M VHB 0.5mm Double sided Black Foam |
Specifications:, ,
Unlike any other LED, the VOLO LEDs were specifically designed ...ReadyMadeRC
VOLO ULTRA COMPACT LEDS - RED
| Emitting Colour | Red |
| Voltage | 12V DC (3S LiPo suitable) |
| Size | 21mm x 7mm x 3.6mm (LxWxH) |
| Operating Temp | -40 to +85 degrees Centigrade |
| Chip technology | AlInGaP |
| Adhesive tape | 3M VHB 0.5mm Double sided Black Foam |
Specifications:, ,
Unlike any other LED, the VOLO LEDs were specifically designed ...