HiModel
JET PLANES 1/6 BLUE PAINTED PILOT
| Thickness at Base | 35mm |
| Width at Base | 67mm |
| Height | 77mm |
| Weight | 31.3 g/1.1 oz |
| Painted color | blue |
, , , , , , Specifications:, , , , , , , , , , , , ,
Features: Fits nearly any 1/6 scale airplane /jet planes.HiModel
L75×W46×H76MM JET PLANE 1/6 SCALE PILOT BLUE HY031-00403
| Length | 75mm |
| Width | 46mm |
| Height | 76mm |
| Weight | 25.8g/0.91oz |
, , , , , , Specifications:, , , , , , , , , , , , ,
HiModel
FEIYU INERTIAL ATTITUDE STABILIZER FY-30A
| ● Mode 1 | FY-30A Deactivated Mode. In this mode, the FY-30A stabilization function is |
| ● Mode 2 | 3D Control Mode. In this mode, the stabilizer utilizes its 3-axis gyroscope to |
| ● Mode 3 | self-balancing mode. In this mode, the FY-30A will automatically command the |
, , , , , , Specifications:, , , , , , , , , , , Applications, The FY30A can be used in the following fixed wing models:, · Traditional layout fixed-wing aircraft with Aileron, Elevator and Rudder, · Flying wings with rudder;, · Flying wings with no rudder;, · Airplanes with no ailerons (rudder and elevator only), · V-tail airplanes with ailerons;, · V tail airplanes with no ailerons, · Any other configuration, please email us for consultation - feiyudz@yahoo.cn., Remote control system:, The FY-30A has been tested to work well with the following RC system:, · Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4G systems, · Graupner / JR PPM 8, PPM 12, SPCM mode;, · MPX PPM8, PPM 12 with UNI mode, · any other system with a neutral position of 1.5 ms (standard remote control device)., FY-30A OperatingMode, The FY-30A can be operated in three flight modes modes:, turned off. The aircraft is completely under the control of the pilot., sense roll velocity and flight attitude. If no input is given by the pilot (sticks in the middle, position) the FY30A will hold the current aircraft attitude. This prevents rolling of the, aircraft at the axial plane and maintains its current posture. Therefore the aircraft can be, easily maneuvered to complete a variety of 3D flight with added stability and smoothness., aircraft control surfaces to maintain level flight at all times., The instruction to change the FY30A flight modes is via a spare channel on the RC receiver., , ,
Features: FY-30A is an inertial attitude measurement instrument used for ...2 Reviews
HiModel
FEIYU FLIGHT STABILISATION SYSTEM FY-20A
| Input voltage | 4.0 to 6.0 Volts |
| Current draw | 52mA (5V) |
| Size | 55 x 33 x 20 mm(2.17 x 1.3 x .79 in) |
| Weight (excluding wires) | 20g(.71oz) |
| Temperature range | -25°C~ +70°C(-13°F~+150°F) |
| Maximum rate of rotation | ≤ 1200 ° / s |
, , , , , , Specifications:, , , , , , , , , , , Application, The FY-20A can be installed in the following aircrafts:, 1. Normal / Traditional fixed-wing planes, 2. Delta-winged plane with rudder, 3. Delta-winged plane without rudder,, 4. Plane without aileron,, 5. V –tail plane with aileron, 6. V –tail plane without aileron, 7. Any other configuration, please, , ,
Features: The FY-20A is a flight stabilizer for fixed wing ...HiModel
FY21AP FPV INERTIAL ATTITUDE STABILIZER(TRADE EDITION) FY-21AP
| Incorporating the AP117 OSD module transmits these parameters | *altitude |
| Additional data can be interfaced to your PC via the Data Radio Link Module upgrade | *longitude |
| Any other configuration, please e-mail us for enquiry | feiyudz@hotmail.com |
| Includes | FY21AP (2.0) Module |
Features:, , In addition, barometric pressure data allows precise altitude hold capability. Beyond providing stabilization for the RC Pilot, under any flight conditions, connections to our other modules allow enhancements such as:, *auto-return to launch site, The FY-21AP can be installed in the following aircrafts:, Normal / Traditional fixed-wing planes, Remote Control system requirement:, The FY-21AP has been tested to work with the following RC systems:, Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, , Resources:, Download Software and instruction manual.,
1. Briefly introduce The FY21AP is a stand-alone autopilot system ...HiModel
FY31AP PATH NAVIGATION & HORNET OSD COMBO
| Inputvoltage | 4.0 ~ 6.0 Volt; |
| Currentdraw | 50mA (5V); |
| Size | 47x 27x 20 mm; |
| Weight (excluding wires) | 25g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Maximum rate of rotation | ≤ 2000 ° /s |
| Input voltage | 3.0 ~ 3.3 Volt; |
| Currentdraw | 60mA (3.3V); |
| Size | 32 x32x 10 mm; |
| Weight (excluding wires) | 22g; |
| Temperature range | -25 ° C ~ +70 ° C; |
| Includes | 1 x FY-31AP |
Features:, , By using your remote control, the FY-31AP can be turned on or off for the following functions:, • Level flight - When stabilization is activated, the FY31AP will automatically control the aircraft for smooth easy flying. For beginners in RC aircraft flying, this is advantages as it makes flight easier and increases the student pilot self-confidence. The system can be activated throughout the entire flight duration, from take off to landing., The FY-31AP provides an optional upgrade combining with the FY-OSD and the Data Radio. With this add-on, you will receive:, • First Person View (FPV) - by connecting this interface to the FY-OSD, telemetric data such as GPS, flight navigation, AHI can be displayed on your downlink video.On the other hand, it will be easier to operate FPV with the functions of automaticbalanceand automated return to home., • FY-31AP module:, • GPS module:, The FY-31AP can be installed in the following aircraft :, 1. Normal / Traditional fixed-wing planes;, The FY-31AP has been tested to work with the following RC systems:, • Robbe-Futaba PPM / PCM 1024 / PCM G3 mode, 2.4 GHz systems；, Includes/Requires:, ,
1. Attitude Flight Stabilization System (AFSS) FY31-AP is an inertial ...1 Reviews
HiModel
35MHZ BA-R3P6 H/T V3 FM 6-CHANNEL MICRO RECEIVER W/O XTAL
| 4. Weight | 0.19 oz or 5.3g |
| 14. Packing | Shrink wrap |
| 15. Pin direction | horizontal pin |
, , , , , , Specifications:, , , , , , , , , , , 1. Sensitivity：＜2μV, 2. Selectivity：－53dB ±3KHz, 3. Dimensions： 35mmX15mmX10mm(1.38in x 0.59in x 0.39in), 5. Channel：1—6CH, 6. Modulation：FM PPM, 7. Compatibility：PPM transmitter (automatically compatible with positive and negative shift transmitters like Futaba, JR, Hitec, Multiplex, Sanwa, GWS etc.), 8. Effective Receiving ranging：＞300M (＞1000 feet), Note: This is the basic spec of R3PX V3 series receivers; field test could exceed this data due to different radio used. If the field test can not meet this data, please check your radio and crystals., 9. Interference test：Connect the receiver to servo (radio and receiver should be on the same channel). Turn on another radio on an adjacent channel and put it close to the receiver. The receiver should work properly (servo does not glitch at all)., 10. Crystal：UM-5 or UM-1 RX single conversion crystal, 11. Operating current：10mA, 12. Input current：5 V (4-cell) ESC is recommended to power these receivers., 13. frequency： 35M, , ,
Features: ★ BLUEARROW R3Px V3 series micro receivers are upgraded ...HiModel
ART-TECH CESSNA182 3 CHANNEL ELECTRIC POWERED AIRPLANES RTF
| Wing span | 980mm |
| Length | 860mm |
| Motor | 480, directly drive |
| Airfoil | RAF 4838 |
| Battery | 8.4v, 1000mah |
| Radio | FM proportional, 3ch for beginner; |
| Frequency Available | 35Mhz, 40Mhz. |
, , , , , , Specifications:, , , , , , , , , , , Weight 560gram, Scale appearance, great attention has been given to details, Very stable flight, easy to control, , ,
Features: The Cessna 182, one of the world most famous ...HiModel
METAL WASHOUT BASE HS1196-78 GRAY COLOR
, , , , , , Specifications:, , , , , , , , , , , New metal washout base has modified the length of the collar, to reduce the clearance between the washout base and the control levers for great 3D performance., , ,
Includes/Requires: ●Metal washout base x 1 ●Collar x 1(Φ5xΦ6.5x13mm)HiModel
TOWER PRO 11KG TORQUE HEAVY DUTY METAL GEARS SERVO MG996R
| Size | 40.7x19.7x42.9mm |
| Weight | 55g |
| Operating speed | 0.17sec/60degree(4.8v) 0.14sec/60degree(6v) |
| Stall torque | 9.4kg/cm(4.8V), 11kg/cm(6V) |
| Temperature Range | 0 degree to 55 degree |
| Dead band width | 5μs |
| Operating Voltage | 4.8-7.2V |
| Gear type | metal |
| Application | Gasoline engine plane,train-flyer |
| Wire length | 31cm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x servo including screws etc 2 x ...HiModel
TOWER PRO 13KG TORQUE HEAVY DUTY METAL GEARS SERVO MG946R
| Size | 40.7x19.7x42.9mm |
| Weight | 55g |
| Operating speed | 0.20sec/60degree(4.8v); 0.17sec/60degree(6.0v) |
| Stall torque | 10.5kg/cm(4.8V),13kg/cm(6V) |
| Temperature Range | 0 degree to 55 degree |
| Dead band width | 5μs |
| Operating Voltage | 4.8-7.2V |
| Gear type | metal |
| Application | Gasoline engine plane,train-flyer |
| Wire length | 32cm |
, , , , , , Specifications:, , , , , , , , , , , , ,
Includes/Requires: Includes: 1 x servo including screws etc 2 x ...3 Reviews
HiModel
RCEXL OPTO GAS ENGINE KILL SWITCH
, , , , , , Specifications:, , , , , , , , , , , This device plugs into a spare receiver channel., This is a must have safety device for any gas powered plane!, This device allows you to safely kill your engine at anytime(on the ground, or in the air!), Or when out of control also allows kill the enfine., , ,
Features: This device allows you to safely and remotely kill ...4 Reviews
HiModel
EZC-RC 4-CHANNLE WIFI RECEIVER (CONTROL YOUR MODEL WITH IPHONE, IPAD, ITOUCH & ANDRIOD)
| Type | RD921 full-range receiver |
| Operation range | 60-70m with model car; 100-120m with model plane |
| band | 2.4GHz |
| Dimensions | 40 x 25 x 9.3 mm (excluding pins) |
| Weight | 9.6g |
, , , , , , Specifications:, , , , , , , , , , , number of channels: 4, APP download links:, a. IOS system, 1., APP for car/trucks, , 2., APP for airplanes, b. Andriod system, 1., APP for car/trucks, , 2., APP for airplanes, Instruction manual, , ,
Features: Control your model with your iphone, ipad or itouch. ...1 Reviews
HiModel
RCGF 15CC PETROL/GAS ENGINE FOR AIRPLANE (REAR INDUCTION)
| Type | 2 cycle piston valve type gasoline engine for airplane |
| Displacement (cc) | 15cc |
| Bore x Stroke (mm) | 29mm*26mm |
| Carburetor | Walbro Pump(made in Japan) & Made in China (Diaphragm butterfly valve type) |
| Ignition | DC-CDI (Computer Controlled auto advance, electronic ignition system) |
| Power supply | 4.8-6V |
| Maximum Output | 2.1 hp/1.54KW |
| speed rang | 1500-15000rpm |
| Gasoline-Version | Pre-mixed Fuel, 25-40 (Gasoline) |
| Lubrication Oil | 2 cycle engine oil |
| Propeller | 15*8 8000 rpm; 13*8 10000rpm (Standard Two leafs prop) |
| recommended Airplane | 60 size plane,50 size plane,40 size plane |
| Cooling System | Air Cooled |
| N.W. (Including ignition and muffler ) | 825g |
| N.W. (Not including ignition and muffler) | 635g |
, , , , , , Specifications:, , , , , , , , , , , (90% high otcane unleaded gasoline, Import gas into carbon fiber installations valves), recommended props 13 x 6, 14 x6,13X8,15X8,15X6, Packing Weight :, , ,
Includes/Requires: Includes:1 x engine 1 x CDI 1 x muffler ...15 Reviews
HiModel
6 PCS STANLEY PRECISION SCREW DRIVER SET
, , , , , , Specifications:, , , , , , , , , , , FOR USE WITH:, Model Plane., Glasses, Cameras, Watches, Electronics, Computers, Small appliances., , ,
Features: The world famous tool brand:stanley,high quality. Ergonomic bi-material shaft ...