Skip to content

NitroTek

ESKY LAMA V3 4CH TWIN BLADE RC HELICOPTER

  • Main rotor diameter
  • 340mm (13.4 inch)
  • Overall length
  • 360 mm (14.2 inch)
  • All-up weight
  • 215g (Battery included)
  • Driven system
  • 2* 180 carbon motors
  • Servo
  • 2X 8g Servos and inside Gyro
  • Battery
  • 7.4V 800mAh Li-polymer
  • Control system
  • 4CH Multifunctional FM Transmitter and 3-in-1 Receiver
  • Radio Control Range
  • 3300 feet (1000m)
  • Frequency
  • 35Mhz with changeable crystals

      ,
    , ,
      ,
    • Improved V3 version
    • ,
    • 4 Ch transmitter
    • ,
    • Super Stable X-Rotation System
    • ,
    • Coaxial counter-rotating blades
    • ,
    • Precise controlling and easy hovering
    • ,
    • Weight saving 3-in-1 Mixer/Gyro/Receiver
    • ,
    • Reliable high quality mixer with built-in gyro
    • ,
    • Suitable for Indoor/Backyard/Park flying 
    • ,
    • Powerful 800mAh Li-polymer battery.
    • ,
    • Proportional Motor Speed Control
    • ,
    • Top quality stronger blades
    • ,
    • Separate servos from mixer
    • ,
    • Trimming of servos can be done both on helicopter or on transmitter. 
    • ,
    • Approximately 15 minutes flight time
    • ,
    • Best choice for Beginner and Advanced
    • ,
    • Full parts backup
    • ,
    • Complete Kit, Ready to Fly
    • ,
    ,

    This is the famous Esky Lama co-axial helicopter. There are ...

    NitroTek

    ESKY HONEY BEE 4CH RADIO CONTROLLED HELICOPTER

  • Main rotor diameter
  • 520mm
  • Weight
  • 290g 
  • Length
  • 510mm
  • Main blade material
  • plastic
  • Power system
  • 370 motor
  • KIT or RTF
  • RTF
  • Control mode
  • normal
  • Transmitter
  • 4CH system
  • Mix controller
  • "4 IN 1" controller(W/gyro,mixer,ESC, receiver)
  • Servo
  • 8g,1.3kg/CM,0.13s/60
  • Battery
  • 7.4V-800mAh Li-Po with UK charger
  • Flying radius
  • ~400m
  • Flight time
  • ~15 minutes

      ,
    , ,
      ,
    • Excellent design for your indoor flight 
    • ,
    • Pre-position servo mounts for easy setup
    • ,
    • Carbon fibre and flybar and boom for superior strength and durability
    • ,
    • Ready for flight out of the box
    • ,
    • New version with Li-Po battery
    • ,
    ,

    The Honey Bee radio controlled helicopter is the best 4 ...

    NitroTek

    WALKERA HM 4# DRAGONFLY 4CH RC HELICOPTER - 2.4GHZ

  • Weight
  • 267g (Battery included)
  • Servo
  • weight 9.1g / speed 0.12sec/60o(4.8V)/ torque 1.1kgf.cm / dimension 22.5*11.8*27mm
  • Receiver
  • RX-2421
  • Gyro
  • Built-in
  • Battery
  • 7.4V 800mAh Li-Po
  • Transmitter
  • 2.4G LCD WK-2402
  • Tail Rotor Diameter
  • 146 mm
  • Main Rotor Diameter
  • 485 mm
  • Overall Length
  • 480 mm
  • Tail Motor
  • 1220FE33
  • Drive Motor
  • 370SH

      ,
    , ,
      ,
    • Best model to learn to fly a single blade remote control helicopter.
    • ,
    • Simple mechanical structure design, easy maintenance.
    • ,
    • Durable Material, capable of bearing most crashes without any damage.
    • ,
    • Fully assembled and tested in the factory.
    • ,
    • Digital sub-micro servos offer precise and powerful control.
    • ,
    • New 2.4G technology, with the functions of identification and precise code pairing, can allow above 20 models to fly in the same field at the same time.
    • ,
    • High performance 370SH motor powered by 7.4V 800mAh Lipo offers 10 to 12 minute flight time.
    • ,
    ,

    The HM 4# is the easy to control, easy to ...

    NitroTek

    ESKY CO-COMANCHE 4CH RC HELICOPTERS- 2.4GHZ VERSION

  • Main rotor diameter
  • 340mm
  • Weight
  • 242g
  • Length
  • 435mm,width
  • Power system
  • 180 motor*2
  • Transmitter
  • 4CH (including training switch and simulator port. 2.4 Ghz
  • Servo
  • (8g,1.3kg.CM,0.12s/60¡)
  • Battery
  • 7.4V 800mAh Li-polymer battery

      ,
    • RTF
    • ,
    • 4 in 1 mix controller (W/gyro,mixer,ESC,receiver)
    • ,
    , ,
      ,
    • Novel and distinct sculpt with high emulation art
    • ,
    • Designed for beginner and is suitable for indoor flight
    • ,
    • Lifter pulley and culvert tail rotor design ensure a more enjoyable flight
    • ,
    • Airline operation with graceful movements and sensitive reaction
    • ,
    • RTF after unwrapping the packing and fixing the battery and dispense with debugging
    • ,
    ,

     

    ,

    Flight simulator software and cable are included as well as four spare blades

    ,

    The Co-Comanche is one of the coolest looking helicopter RC ...

    NitroTek

    ESKY BELT CP V2 6CH RC HELI- 2.4 GHZ VERSION

  • Length
  • 640mm
  • Height
  • 230mm
  • Main Blade diameter
  • 680mm
  • Tail Blades diameter
  • 130mm
  • Motor gear
  • 10T
  • Main driven gear
  • 140T
  • Tail driven gear
  • 110T
  • Motor
  • 450 brushless motor
  • ESC
  • 25A 
  • Gyro
  • New Esky headlock gyro
  • Servo
  • Digital *4Pcs
  • Transmitter
  • 6 channel 2.4Ghz
  • Receiver
  • 6 channel
  • Battery
  • Li-polymer 1800mAh, 11.1V, 20C discharge
  • Arial, Helvetica, sans-serif; font-size
  • Arial, Helvetica, sans-serif; font-size
  • Arial, Helvetica, sans-serif; font-size
  • Arial, Helvetica, sans-serif; font-size
  • Arial, Helvetica, sans-serif; font-size
    • ,
    • Driven gear rate: 14:1:5
    • ,
    , ,
      ,

      This is E-Sky's flagship model. Aimed at intermediate to advanced ...

      NitroTek

      COPTERX BLACK ANGEL PRO RC HELICOPTER - RTF VERSION

    • Length
    • 653mm
    • Height
    • 240mm
    • Main Rotor
    • 714mm
    • Tail Rotor
    • 157mm
    • Motor Gear
    • 12T/13T
    • Main Gear
    • 150T
    • Autorotation Tail Drive Gear
    • 43T
    • Tail Drive Gear
    • 10T
    • Weight(without electric parts)
    • 370g
    • Weight(including electric parts)
    • 760~800g

        ,
      • Drive Gear Ratio: 1:12.5:4.3(12T) / 1:11.54:4.3(13T)
      • ,
      , ,
        ,
      • CNC & Carbon Construction
      • ,
      • Auto-Rotation System
      • ,
      • Rear Tail Servo Mount
      • ,
      • Collective Pitch System
      • ,
      • Tail Rotor Drive Belt System
      • ,
      • Main Drive Gear with Cooling Fan
      • ,
      • Professional Servo Control Lever Design
      • ,
      ,

      With it’s innovative design and robust aluminium/carbon construction, Black Angel ...

      NitroTek

      COPTERX SE V2 PRO RC HELICOPTER - RTF VERSION

    • Length
    • 650mm
    • Height
    • 230mm
    • Main Rotor
    • 700mm
    • Tail Rotor
    • 150mm
    • Motor Gear
    • 13T/11T
    • Main Gear
    • 150T
    • Autorotation Tail Drive Gear
    • 106T
    • Tail Drive Gear
    • 25T
    • Weight(without power system)
    • 354g
    • Weight(including power system)
    • 690g

        ,
      • Drive Gear Ratio:1:11.5:4.24/1:13.6:4.24
      • ,
      , ,
        ,
      • CNC & Carbon Construction
      • ,
      • Auto-Rotation System
      • ,
      • Rear Tail Servo Mount
      • ,
      • Collective Pitch System
      • ,
      • Tail Rotor Drive Belt System
      • ,
      • Main Drive Gear with Cooling Fan
      • ,
      • Professional Servo Control Lever Design
      • ,
      ,

      The CopterX CX 450 V2 Superior Edition (eCCPM) represents the ...

      NitroTek

      WASP V3 6CH CCPM RTF 2.4GHZ RC HELICOPTER

    • Main Rotor Diameter
    • 475mm
    • Length
    • 450mm
    • Flying Weight
    • 293g (Battery included)
    • Driven system
    • Skyartec 4500KV brushless motor
    • Gyro
    • Skyartec Head Lock
    • Servo
    • 3X Skyartec 9g,1X Skyartec 5g
    • ESC
    • Skyartec 15A
    • Battery
    • Skyartec 7.4V 900mAh Lithium Li-Po
    • Control system
    • SKY703 2.4GHz  7 channel Transmitter and Receiver  
    • Radio Control Range
    • 2500 feet (762m)

        ,
      , ,
        ,
      • CCPM system allows more aerobatic actions and tricks.
      • ,
      • Belt driven tail rotor.
      • ,
      • Symmetrical stronger wooden airfoil has better aerobatic characteristics.
      • ,
      • Powerful brushless motor allows indoor and outdoor use.
      • ,
      • 370 super motor provides super power for high performance flight.
      • ,
      • Simple mechanical structure design, easy maintenance.
      • ,
      • Durable Material, capable of bearing most crashes without any damage. 
      • ,
      • High performance main rotor blade significantly increase the strength for performing advanced 3D maneuvers. 
      • ,
      • Adjustable Pitch Control System, stainless steel Fly Bar.
      • ,
      • Fully assembled and tested in the factory.
      • ,
      • New high-tech 7-channel 2.4G rc transmitter system.
      • ,
      • Digital sub-micro servos offer precise and powerful control.
      • ,
      ,

      The Wasp V3 rc helicopter is the latest 6 channel ...

      NitroTek

      NINJA 400 6CH RTF 2.4GHZ REMOTE CONTROLLED HELICOPTER

    • main rotor diameter
    • 580mm
    • main motor type
    • BL 4500kv
    • main body length
    • 550mm
    • Average flight time approx
    • 10min
    • Flight Weight
    • 440g
    • Battery type
    • 11.1V 1100mAh Li-Po
    • Radio system
    • 7ch 2.4G
    • Main Rotor RPM
    • 3000

        ,
      ,
        ,
      ,
        ,
      , ,
        ,
      • Completely assembled and tested at the factory.
      • ,
      • 120 degree ECCPM control system.
      • ,
      • New High-tech 6-channel RC system.
      • ,
      • High performance Heading Lock gyro is Capable of sport flying and 3D aerobatics.
      • ,
      • Digital Sub-Micro servos and Micro Heading Lock gyro offer precise and powerful control.
      • ,
      • Stainless steel fly bar, main shaft and tail shaft.
      • ,
      • High Performance 4500KV out-runner brushless motor used as the main drive makes the flight much stable and gives more power.
      • ,
      • Auto-rotation landing system.
      • ,
      • Precise control and hovering.
      • ,
      • Suitable for indoor/outdoor use.
      • ,
      • Ultra-tough and resilient but lightweight structure.
      • ,
      • Belt Drive System.
      • ,
      • High Inertial Main Blade.
      • ,
      • High Rigidity Iron Main Shaft.
      • ,
      • Full Ball Bearing & Metal Ball End.
      • ,
      • High rigidity alloy tail boom.
      • ,
      • High Strength Tail Stand.
      • ,
      ,

      The Ninja 400 is a top of the range remote ...

      NitroTek

      WASP V4 BELT 250 RTF 2.4G RC HELICOPTER

    • Main Rotor Diameter
    • 470mm
    • Length
    •  460mm
    • Flying Weight
    • 330g
    • Driven system
    • Skyartec 4500KV brushless motor
    • Gyro
    • Sky600 Head Lock
    • Serv
    • 3X Skyartec 9g + 1X Skyartec 5g
    • ESC
    • Skyartec 18A
    • Battery
    • Skyartec 11.1V 900mAh Lithium Li-Po

        ,
      , ,
        ,
      • Completely assembled and tested at the factory.
      • ,
      • 120 degree eCCPM control system.
      • ,
      • New high-tech 7-channel 2.4Ghz RC system
      • ,
      • High performance head lock gyro is capable of sport flying and 3D aerobatics.
      • ,
      • Digital sub-micro servos and micro head lock gyro offer precise and powerful control.
      • ,
      • Stainless steel fly bar, main shaft and tail shaft.
      • ,
      • 4500KV brushless motor, 18A brushless ESC and 3S 11.1V 900mAh 20C Li-Po battery deliver incredible power and performance.
      • ,
      • Auto-rotation system
      • ,
      • Belt drive system
      • ,
      • High inertial main blade
      • ,
      • Shock proof iron landing skids
      • ,
      • Full ball bearings and metal ball ends
      • ,
      • Strong carbon fibre tail stand
      • ,
      • Training set included
      • ,
      • Spare main rotor blades included
      • ,
      ,

      Skyartec's new flagship model is the Wasp V4 Belt 250. ...

      NitroTek

      SELF BUILD RAPTOR RC TRUGGY - BRUSHLESS VERSION

    • Width
    • 330MM
    • Height
    • 140MM
    • Length
    • 410MM
    • Wheelbase
    • 270MM
    • Gear ratio
    • 8.95
    • Wheel dia.
    • 110*55MM
    • Ground clearance
    • 36MM
    • Radio
    • FM 27mhz Pistol Type
    • Battery
    • 11.1V 1800mah Li-Polymer
    • Motor
    • Brushless 2399kv
    • ESC
    • 25A Brushless

        ,
      • Scale: 1:10
      • ,
      , ,
        ,
      • 1/10 Scale brushless powered build it yourself car
      • ,
      • Everything needed to build included, even the tools
      • ,
      • 4WD Shaft drive system
      • ,
      • Extreme power brushless motor
      • ,
      • Oil-filled shocks
      • ,
      • Powerful Li-Polymer battery with balanced charger
      • ,
      • Front and rear bevel differentials
      • ,
      • Brushless ESC
      • ,
      • Pre-painted exclusive body shell
      • ,
      • High quality FM 27MHZ CE approved Radio system with changeable crystals
      • ,
      ,

      Our new full 1:10 scale Raptor brushless rc truggy self ...

      NitroTek

      SELF BUILD RAPTOR RC TRUGGY - BRUSHED VERSION

    • Width
    • 330MM
    • Height
    • 140MM
    • Length
    • 410MM
    • Wheelbase
    • 270MM
    • Gear ratio
    • 8.95
    • Wheel dia.
    • 110*55MM
    • Ground clearance
    • 36MM
    • Radio
    • AM 27mhz Pistol Type
    • Battery
    • 7.2V Ni-Mh Tamiya type
    • Motor
    • 540 Brushed
    • ESC
    • Proportional forward, brake, proportional reverse.
    • Scale
    • 1

        ,
      , ,
        ,
      • 1/10 Scale build it yourself car
      • ,
      • Everything needed to build included, even the tools.
      • ,
      • 4WD Shaft drive system
      • ,
      • High power 540 motor
      • ,
      • Oil-filled shocks
      • ,
      • 7.2V Tamiya type battery pack with charger
      • ,
      • Front and rear bevel differentials
      • ,
      • Electronic speed controller
      • ,
      • Pre-painted exclusive body shell
      • ,
      • CE approved Radio system with changeable crystals for using more than one model at a time without interference
      • ,
      ,

      The Raptor truggy is a high performance, high speed speed ...

      NitroTek

      GIANT AIRWOLF RTF 4CH RC HELICOPTER WITH LIPO BATTERY (7.4V 1500MAH)

    • Charge time
    • 1.5-2 Hours
    • Flight Time
    • 8 minutes
    • Aviate Height
    • 80M
    • Aviate Area
    • 100 M
    • Frequency
    • 35.066MHZ, 35.120MHZ, 35.180MHZ
    • Function
    • Up/Down, Left/Right Rotation, Forward/Backward, Left/Right

        ,
      • 7.4V 1500mAh Lithium Rechargeable battery pack
      • ,
      , ,
        ,
      • LARGE SCALE
      • ,
      • 4 Channel Full RC system
      • ,
      • Installed fast servos and 4-in-1 control unit
      • ,
      • Dual motors makes the Airwolf powerful and efficient
      • ,
      • FULLY ASSEMBLED
      • ,
      • READY TO FLY
      • ,
      ,

      This beautiful SUPER SIZE AIRWOLF - 4 chl ...

      NitroTek

      AIRWOLF 4CH RC HELICOPTER WITH LIPO BATTERY

    • Battery
    • 7.4V Li-po 600mah
    • Control range
    • around 60m
    • Flight duration
    • 8-10 minutes

        ,
      • Product Size 42*34*18.50(cm)
      • ,
      , , ,
        ,
      • 4 Ch Remote Control
      • ,
      • Counter Rotating Blades
      • ,
      • Plastic Realistic Body
      • ,
      • Flashing LED Lights
      • ,
      • Detailed Paint Job
      • ,
      • Uses ultra tough iron-fiber materials
      • ,
      • New servo and mixer system
      • ,
      • Powerful lithium battery
      • ,
      • Micro servos, receiver, Gyro and Speed controller/mixer
      • ,
      ,

      If you're looking for a helicopter with more control and ...

      BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby