Hobby-Lobby
BRISTOL BEAUFIGHTER TWIN ARF
,
New low cost power system with great performance 40-3/8" wingspan, ...Hobby-Lobby
DHC-2 BEAVER 25E ARF
| Wingspan | 68 in (1735mm) |
| Overall Length | 43 in (1090mm) |
| Servos | (6) JR SPORT™ MN-48 |
| Prop Size | APC 12x8E |
| Hardware Included | Yes |
| Speed Control | 60 amps |
| Flaps | Yes, prehinged |
| Approx. Flying Duration | 10 minutes |
Technical Specifications:, DHC-2 Beaver 25e ARF Specs, Wing Area:, 565 sq in (36.4 sq dm), Flying Weight:, 4.9-6.2 lb (2.2-2.8 kg), Motor Size:, Power 25 or Power 32, Radio:, 6+ channels with 6 mini servos, Trim Scheme Colors:, UltraCote® White (HANU870); Dark Red (HANU871); Gold (HANU879), Recommended Battery:, 3S 11.1V 3200mAh Li-Po,
Platinum Series scale, civilian 25-size ARF model. The sport utility ...Hobby-Lobby
ERC B-25 APACHE PRINCESS EPO TWIN (OVERSIZE)
,
Spare Parts Still Available for the eRC B-25 Apache Princess ...Hobby-Lobby
SEBART MIG-29 SWIFTS TEAM PLANE W/O GYRO (OVERSIZE)
| Wingspan | 36" (920 mm) |
| Length | 53" (1340 mm) |
Jason Says:, "The first time I flew one, I knew it was something special. Within 30 seconds I had the tail down on deck in a hover with a huge smile on my face. That's one cool jet!", SebArt Mig-29 Swifts Team Includes:, Lightweight EPS Foam construction, Thrust/weight ratio 1.25:1, Here's Everything you'll need:, Battery, Technical Specifications:, SebArt Mig-29 Swifts Team Specs:, Wing Area:, 329 sq in (21.2 sq dm), Weight (less battery):, 57-59 oz (1625-1675g), Radio:, 7+ ch. w/9 - 9 g servos installed,
World's first production 3D EDF! Finally, a production model EDF ...Hobby-Lobby
SEBART MIG-29 RED STAR PLANE W/O GYRO (OVERSIZE)
| Wingspan | 36" (920 mm) |
| Length | 53" (1340 mm) |
Jason Says:, "The first time I flew one, I knew it was something special. Within 30 seconds I had the tail down on deck in a hover with a huge smile on my face. That's one cool jet!", SebArt Mig-29 Red Star Includes:, Lightweight EPS Foam construction, Thrust/weight ratio 1.25:1, Here's Everything you'll need:, Battery, Technical Specifications:, SebArt Mig-29 Red Star Specs:, Wing Area:, 329 sq in (21.2 sq dm), Weight (less battery):, 57-59 oz (1625-1675g), Radio:, 7+ ch. w/9 - 9 g servos installed,
World's first production 3D EDF! Finally, a production model EDF ...Hobby-Lobby
F4U CORSAIR PLUG-N-PLAY (OVERSIZE)
| Wingspan | 44. in. |
| Length | 35 in. |
| Radio | 4+ channel (not included) |
| Servos | Installed |
| Speed Control | 30 Amp Brushless with Switch-Mode BEC (installed) |
| Recommended Battery | 3S 11.1V 1800mAh LiPo |
F4U Corsair PNP Highlights:, Steerable tail wheel and fixed landing gear allow for smooth takeoffs and landings, F4U Corsair Specs:, Needed to complete:, Transmitter, receiver, battery and charger., Technical Specifications:, Length:, 35", Wingspan:, 44", Flying Weight:, 30 oz., Controls:, Aileron, Elevator, Rudder, Throttle,
Fly a True American Classic ParkZone is proud to present ...Hobby-Lobby
BRISTOL BEAUFIGHTER TWIN ARF
,
New low cost power system with great performance 40-3/8" wingspan, ...Hobby-Lobby
CHAMP RTF ULTRA-MICRO
| Wingspan | 22.4 in. (517mm) |
| Overall Length | 14.3 in. (365mm) |
| Flying Weight | 1.3 oz. (38g) |
The HobbyZone Champ is also equipped with the Spektrum 2.4GHz DSM2 advantage: The Champ's radio system uses the same Spektrum 2.4GHz DSM2 technology that is trusted by experienced RC pilots all around the world. With DSM2 technology you will enjoy complete freedom from signal interference whenever you fly., Champ RTF Highlights:, Everything you need to Teach Yourself to Fly in one box- even the batteries, Technical Specifications:, Champ RTF Specs:, Radio:, 4-channel 2.4 GHz Rx with Spektrum DSM2 3 channel receiver, CG (center of gravity):, Approximately 28mm from leading edge of the main wing, Prop Size:, 5.1 x 2.8 (130 x 70mm), Recommended Battery:, 3.7V 1S 150mAh LiPo (included), Charger:, DC 3.7V LiPo charger (included), Landing Gear:, Fixed main with steerable tail wheel,
The Champ takes the stress out of teaching yourself to ...Hobby-Lobby
SLASH RTR, CHAD HORD #9 BODY
| Needed to complete | 8 AA batteries. |
| Length | 22.4 inches (568mm) |
| Width | 11.7 inches (296mm) |
| Wheelbase | 13.2 inches (335mm) |
| Weight | 4.8 lbs. (2.16kg) |
| Tire Type | Slash 2.2" |
| Speed Control | Waterproof XL-5 ESC |
| Wheel Size | 2.2" |
Features:, Scale dimensions and looks of actual short-course off-road race trucks, Technical Specifications:, Traxxas Slash RTR Racing Truck Specs:, Type:, 2WD Short Course Truck, Scale:1:10, Chassis:, Composite Nylon Modified Tub, Suspension:, Long Front, XX Long Rear, Motor:, Titan 12T 550 modified motor with internal cooling fan, Speed:, 30+ mph with 7-cell battery and included optional 23-tooth pinion gear,
Off-road racing Short Course RC race truck The Traxxas Slash ...Hobby-Lobby
ULTRACOTE GREEN
Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Key Features:, High tech polyester covering, Temp ranges are as follows:, Adhesion to wood begins at 200 to 220 degrees F., Surface Preparation:, The covering job can only be as good as the finish of the surface it's applied over. In order for the covering to properly adhere to a surface, the surface must first be smooth and clean. Sand the model using a sanding block and progressively finer sandpaper, with the final sanding being done with 320 grit paper. Vacuum away all of the dust, as specks of dust under the covering will leave unsightly bumps. Fill gaps and dents with a high-quality filler. If using light-colored UltraCote (such as white or yellow), use a tan-colored filler that matches the wood color to prevent the filler from showing through., Trim Film to Size:, Start by covering the bottom of one wing half. Using scissors or sharp hobby knife, cut a piece of UltraCote a few inches larger than needed to cover the wing. Remove the backing (save for later) and place the covering with the adhesive (dull) side down, centered over the wing. Set the covering iron to the application temperature of 220�F., Tacking Covering to Spar:, Tack the covering to the spar or the high point of the wing, using your iron as shown (an iron sock is highly recommened). Gently pull the covering toward the root and toward the tip, as you work the iron from the center of the spar to the root and tip of the wing. Press gently with the iron, allowing the heat (not pressure) to activate the adhesive and bond the covering to the high point. Ideally, the covering will naturally lay flat against the entire surface with a minimum of wrinkles., Covering a Solid-Sheeted Wing:, If covering a solid-sheeted wing, work from the center of the spar outward to the trailing edge and then to the leading edge as shown, using the iron at 220�F. If a wrinkle develops, the covering can be carefully lifted and reapplied., Covering an Open-Structure Wing:, If covering an open-structure wing, ,
UltraCote Green Hangar 9 UltraCote is a high tech polyester ...Hobby-Lobby
QUIK-CURE 5 MINUTE EPOXY, 4.5 OZ.
,
Quik Cure 5 Minute Epoxy, 4.5 oz. Quik-Cure epoxy cures ...Hobby-Lobby
DX18 SYSTEM WITH AR9020, MD2 BY SPEKTRUM
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR9020 |
| Range | Full |
| Telemetry | Yes |
| Computer Radio | Yes |
| Experience Level | Advanced |
| Frame Rate | 11/22 Ms |
| Resolution | 2048 |
DX18 Highlights:, 50 Model Memory, Technical Specifications:, DX8 8Ch Transmitter w/AR8000 Specs:, Number of Channels, Programming Features:, Airplane/Heli/Sailplane, Model Memory:50, Modes:, Selectable 1, 2, 3 or 4,
DX18 has the pro-class tools you need. To truly fly ...Hobby-Lobby
DX18 SYSTEM WITH AR9020, MD2 BY SPEKTRUM
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR9020 |
| Range | Full |
| Telemetry | Yes |
| Computer Radio | Yes |
| Experience Level | Advanced |
| Frame Rate | 11/22 Ms |
| Resolution | 2048 |
DX18 Highlights:, 50 Model Memory, Technical Specifications:, DX8 8Ch Transmitter w/AR8000 Specs:, Number of Channels, Programming Features:, Airplane/Heli/Sailplane, Model Memory:50, Modes:, Selectable 1, 2, 3 or 4,
DX18 has the pro-class tools you need. To truly fly ...