Skip to content

NitroTek

GS RACING STORM CLX PRO 1/8TH NITRO RC BUGGY KIT

  • Length
    		• 510mm
  • Height
    		• 200mm
  • Ground clearance
    		• 60mm
  • Wheelbase
    		• 326-330mm
  • Gear Ratio
    		• 10.5
  • Race Weight
    		• 3300g

      ,
    • Track: F:305mm, R:307mm
      • ,
    , ,
      ,
    • Adjustable wheelbase with long travel suspension front and rear
      • ,
    • Ferodo brake pads with vented brake discs
      • ,
    • Zero bump steer 20 degree C-hub/knuckles
      • ,
    • Compact and balanced chassis layout
      • ,
    • Forward mounted double stage air filter and integrated splash guard
      • ,
    • Front filter and PT mount included
      • ,
    • Captured hinge pin design front and rear. All arms can be used left or right
      • ,
    • Adjustable front upper and lower arm position settings
      • ,
    • Easy access radio box with optional plate if on/off switch is not used roll center
      • ,
    • Rubber sealed bearings throughout
      • ,
    • Adjustable Ackerman and ball bearing supported bell cranks
      • ,
    • 7075 CNC lightweight narrow chassis with steel droop stops
      • ,
    • Lightweight 10T hardened helical cut pinion gears
      • ,
    • Full set of lightweight CV driveshafts standard
      • ,
    • Hard anodized wheel nuts with covered wheel nuts standard
      • ,
    • Lightweight outdrives and lightweight 40T conical gears mated to small diameter differentials
      • ,
    • Lightweight 42T spur gear, 2 piece center diff mount　with off center brake cams and integrated brake disc　guides
      • ,
    • Aluminum 3 shoe clutch with 5x11mm bearing　equipped 16T bell
      • ,
    • 16mm Aluminum threaded shocks with optional springs and pistons standard
      • ,
    ,

    Leaving behind old traditions and taking buggy design to a ...

    Read more

    NitroTek

    AMPHIBIOUS RC BOAT AND CAR LANDING CRAFT

  • Remote control distance
    		• 50 meters
  • Charging time
    		• 4 hours
  • Play Time
    		• 20-25 minutes
  • Missile launch
    		• 10-20 meters
  • Frequency
    		• 27MHZ, 40MHZ
  • Product Dimensions
    		• 24.5 * 24 * 12CM

      ,
    • 7.2V nickel rechargeable batteries
      • ,
    • 7.2V charger
      • ,
    • 9V battery
      • ,
    , ,
      ,
    • Operable on land and on water
      • ,
    • Remote control fold away wheels
      • ,
    • Flashing lights
      • ,
    • Mulitple frequencies mean more than one vehicle can be operated at the same time
      • ,
    • Rotating missile turret which fires 5 missiles
      • ,
    • Amphibious tanks
      • ,
    • Manual
      • ,
    • Missiles included
      • ,
    ,

    This amphibious landing craft and missile launcher works both on ...

    Read more

    NitroTek

    WARRIOR 1/8 NITRO RADIO CONTROLLED BUGGY

  • Height
    		• 185mm
  • Length
    		• 505mm
  • Width
    		• 310mm
  • Wheel base
    		• 315~320mm
  • Track F/R
    		• 310mm
  • Ground clearance
    		• 30mm
  • Weight
    		• 3300g
  • Transmitter
    		• 2 channel

      ,
    , ,
      ,
    • New C-hub steering;
      • ,
    • Newly developed suspension;
      • ,
    • Twin adjustable rear suspension;
      • ,
    • Four wheel drive
      • ,
    • Lightweight ultra-compact gear box; 
      • ,
    • Solid aluminum chassis;
      • ,
    • Width of only 129mm; 
      • ,
    • Quicker steering and fast response;
      • ,
    • 16mm super big bore oil shocks;
      • ,
    • New gear ratio;
      • ,
    • Easy maintenance pinion gearbox;
      • ,
    • All Steel Gear;
      • ,
    • Adjustable Sway bar ball cups (Pro only);
      • ,
    • Adjustable high-downforce wing;
      • ,
    ,

    The Warrior is a fully built, fully featured, race ready, ...

    Read more

    NitroTek

    WEREWOLF 1/8 BRUSHLESS ELECTRIC RC BUGGY - STANDARD VERSION

  • Height
    		• 185mm
  • Length
    		• 505mm
  • Width
    		• 310mm
  • Wheel base
    		• 315~320mm
  • Track F/R
    		• 310mm
  • Ground clearance
    		• 30mm
  • Weight
    		• 3000g
  • Radio
    		• 2.4Ghz Pistol Type
  • Battery
    		• 11.1V Li-Po With Charger
  • Motor
    		• Brushless with ESC

      ,
    • Scale: 1:8
      • ,
    , ,
      ,
    • 1/8 Scale brushless powered car
      • ,
    • Extreme High Speeds
      • ,
    • 2.4G Radio Equipment
      • ,
    • 4WD Shaft drive system
      • ,
    • 3 diff. shaft drive 4WD
      • ,
    • 2.5mm aluminium chassis
      • ,
    • 3mm F/R Alum. shock tower;
      • ,
    • High-torque metal geared steering servo
      • ,
    • Front universal drive shafts (pro version)
      • ,
    • All linkages set with adjustable turnbuckles
      • ,
    • Option for four disc brake system
      • ,
    • Brushless motor, brushless ESC
      • ,
    • Li-Po battery and balanced charger
      • ,
    • Plus many more. See below images for rest of features.
      • ,
    ,

    This is our highest spec electric rc car. Designed with ...

    Read more

    NitroTek

    WARRIOR 1/8 NITRO BUGGY - STANDARD VERSION WITH REMOTE STARTER

  • Height
    		• 185mm
  • Length
    		• 505mm
  • Width
    		• 310mm
  • Wheel base
    		• 315~320mm
  • Track F/R
    		• 310mm
  • Ground clearance
    		• 30mm
  • Weight
    		• 3300g
  • Transmitter
    		• 2 channel

      ,
    ,

    A remote start upgrade is available as an option.

    , ,
      ,
    • New C-hub steering;
      • ,
    • Newly developed suspension;
      • ,
    • Twin adjustable rear suspension;
      • ,
    • Four wheel drive
      • ,
    • Lightweight ultra-compact gear box; 
      • ,
    • Solid aluminum chassis;
      • ,
    • Width of only 129mm; 
      • ,
    • Quicker steering and fast response;
      • ,
    • 16mm super big bore oil shocks;
      • ,
    • New gear ratio;
      • ,
    • Easy maintenance pinion gearbox;
      • ,
    • All Steel Gear;
      • ,
    • Adjustable Sway bar ball cups (Pro only);
      • ,
    • Adjustable high-downforce wing;
      • ,
    ,

    The Warrior is a fully built, fully featured, race ready, ...

    Read more

    NitroTek

    SPITFIRE 4CH RC PLANE WITH RETRACTABLE LANDING GEAR 2.4GHZ RTF

  • Wingspan
    		• 47 inches (1200mm)
  • Overall Length
    		• 40 inches (1010mm)
  • Flying Weight
    		• 42.32 oz (1200 g) w/Battery
  • Motor Size
    		• 1100kv outrunner brushless motors (installed)
  • Radio
    		• 2.4ghz 5 channel included
  • Servos
    		• 4 x 9g Servos installed
  • Speed Control
    		• Dynam Pro 30A Brushless with Switch-Mode BEC (installed)
  • Battery
    		• 3C 11.1V 2200 25C
  • Flight Times
    		• Average (10-18 mins)
  • Assembly Time
    		• 45min

      ,
    , , ,
      ,
    • Powerful 1100kv brushless motors (installed)
      • ,
    • Everything included
      • ,
    • 2.4ghz 5 channel radio equipment
      • ,
    • Electric retractable landing gear
      • ,
    • Large 1200mm wingspan
      • ,
    • Realistic design
      • ,
    • High quality model from industry leader Dynam Rc
      • ,
    ,

    The warbird series has been expanded to include a scale ...

    Read more

    NitroTek

    CONDOR NITRO RADIO CONTROLLED BUGGY

  • Width
    		• 267MM
  • Height
    		• 155MM
  • Track
    		• 240MM
  • Length
    		• 430MM
  • Wheelbase
    		• 280MM
  • Gear ratio
    		• 8.35
  • Engine
    		• Team Infinity .18
  • Wheel dia.
    		• 88*34MM(FRONT); 88*41MM(REAR)
  • Ground clearance
    		• 27MM

      ,
    , ,
      ,
    • 1/10 Scale nitro radio controlled car
      • ,
    • 4WD Shaft drive system
      • ,
    • Infinity powerful .18 pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals
      • ,
    ,

    If you want to race off road and on road ...

    Read more

    NitroTek

    CYCLONE NITRO REMOTE CONTROLLED CARS

  • Width
    		• 199MM
  • Height
    		• 115MM
  • Track
    		• 185MM
  • Length
    		• 380MM
  • Wheelbase
    		• 259MM
  • Gear ratio
    		• 8.35
  • Engine
    		• New Powerful Team Infinty 18
  • Wheel dia.
    		• 64*26MM
  • Ground clearance
    		• 8.5MM

      ,
    , ,
      ,
    • 1/10 Scale nitro powered car
      • ,
    • 4WD Shaft drive system
      • ,
    • Japanese high quality pull start engine
      • ,
    • Oil-filled shocks
      • ,
    • Single speed gear box
      • ,
    • Powerful .18 engine
      • ,
    • Front and rear bevel differentials
      • ,
    • 75CC Fuel tank
      • ,
    • Metal disc brake system
      • ,
    • Pre-painted and cut body shell
      • ,
    • Sealed box for protecting receiver system
      • ,
    • High quality 27MHZ CE approved Radio system with changeable crystals.
      • ,
    ,

    For all the speed junkies! The Cyclone is our quickest ...

    Read more

    NitroTek

    BACKWASH NITRO RADIO CONTROLLED BUGGY

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 250mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 2 Speed
    		• 5.84
  • Ground Clearance
    		• 26mm
  • Front Tyres
    		• 32mm width 86mm diameter
  • Rear Tyres
    		• 40mm width 86mm diameter
  • Radio
    		• Wheel type 2.4G
  • Engine
    		• Infinity .18

      ,
    , ,
      ,
    • Pivot Ball suspension
      • ,
    • Assembled Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75 cc fuel tank with splash guard
      • ,
    • 2 speed automatic gearbox
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

    This is the great looking and performing nitro buggy. The ...

    Read more

    NitroTek

    BUG CRUSHER NITRO REMOTE CONTROL MONSTER TRUCKS

  • Length
    		• 400mm
  • Height
    		• 185mm
  • Width
    		• 310mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 1 Speed
    		• 13.34
  • Ground Clearance
    		• 30mm
  • Tyres
    		• 60mm width 120mm diameter
  • Radio
    		• Wheel type
  • Engine
    		• Infinity .18

      ,
    , ,
      ,
    • Pivot Ball suspension
      • ,
    • Innovative spring loaded bumper
      • ,
    • 8 Oil-filled aluminium shocks
      • ,
    • 2.5mm thick anodised aluminium chassis
      • ,
    • Composite Tuned Pipe
      • ,
    • Pre-painted body with decals applied
      • ,
    • Super-efficient 4WD shaft-drive
      • ,
    • 75cc fuel tank with splash guard
      • ,
    • Hollow light weight flywheel
      • ,
    • Slipper clutch system to protect spur gear
      • ,
    • High impact & high traction electroplated wheels
      • ,
    • Fiber disc brake for extra stopping power
      • ,
    • Front and rear hardened metal drive gears
      • ,
    • Sealed radio box protects the electronics
      • ,
    • Adjustable steel turnbuckles
      • ,
    • High performance Infinity 18 Engine
      • ,
    • Wheel controller
      • ,
    ,

    This HSP nitro monster truck has been finished with a ...

    Read more

    NitroTek

    BUG CRUSHER ELECTRIC RADIO CONTROLLED TRUCK

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 300mm
  • Wheelbase
    		• 275mm
  • Ground Clearance
    		• 30mm
  • Weight
    		• 1530g
  • Tyres
    		• 60mm width 120mm diameter
  • Radio
    		• Wheel type
  • Motor
    		• RC 540
  • ESC
    		• HSP 03018
  • Battery
    		• 7.2V 1800mah

      ,
    • Gear Ratio 1 Speed: 11:1
      • ,
    , ,
      ,
    • Aluminium centre drive joint
      • ,
    • Powerful motor system
      • ,
    • Large solid shock towers
      • ,
    • High performance front/rear diffs
      • ,
    • Powerful suspension
      • ,
    • Aluminium radio tray
      • ,
    • Eight oil filled aluminium capped shocks
      • ,
    • Anti-skid tyres and chrome plated rims
      • ,
    • Spring loaded tough bumper
      • ,
    ,

    If you are ready to take the electric rc hobby ...

    Read more

    NitroTek

    XSTR ELECTRIC RADIO CONTROL BUGGY 2.4G

  • Length
    		• 400mm
  • Height
    		• 160mm
  • Width
    		• 250mm
  • Wheelbase
    		• 275mm
  • Gear Ratio 1 Speed
    		• 8.3
  • Ground Clearance
    		• 26mm
  • Weight
    		• 1300g
  • Tyre Width
    		• 32mm (F) 40mm (R)
  • Tyre Diameter
    		• 86mm
  • Radio
    		• Wheel type 2.4G Transmitter
  • Motor
    		• RC 540
  • ESC
    		• HSP 03018
  • Battery
    		• 7.2V 1800mah

      ,
    , ,
      ,
    • Aluminium centre drive joint
      • ,
    • Powerful motor system
      • ,
    • Aluminium shock towers
      • ,
    • High performance front/rear diffs
      • ,
    • Powerful suspension
      • ,
    • Aluminium radio tray
      • ,
    • Four oil filled aluminium capped shocks
      • ,
    • Anti-skid tyres and chrome plated rims
      • ,
    • Stylish off road wing
      • ,
    • 4WD system
      • ,
    ,

    This is a high spec, pro built radio controlled buggy ...

    Read more

    NitroTek

    COPTERX ME V2 RC HELICOPTER - RTF VERSION

  • Length
    		• 650mm
  • Height
    		• 230mm
  • Main Rotor
    		• 700mm
  • Tail Rotor
    		• 150mm
  • Motor Gear
    		• 13T/11T
  • Main Gear
    		• 150T
  • Autorotation Tail Drive Gear
    		• 106T
  • Tail Drive Gear
    		• 25T
  • Drive Gear Ratio
    		• 1
  • Weight(without power system)
    		• 254g
  • Weight(including power system)
    		• 590g

      ,
    , ,
      ,
    • Aluminium frame and tail boom
      • ,
    • Auto-Rotation System
      • ,
    • Rear Tail Servo Mount
      • ,
    • Collective Pitch System
      • ,
    • Tail Rotor Drive Belt System
      • ,
    • Main Drive Gear with Cooling Fan
      • ,
    • Professional Servo Control Lever Design
      • ,
    ,

    The ME helicopter version is lower priced than the SE ...

    Read more

    NitroTek

    CATALINA 4CH BRUSHLESS TWIN POWER RC SEA PLANE 2.4GHZ

  • Wing span
    		• 1380mm
  • Length
    		• 880mm 
  • Flying Weight
    		• 780g 
  • Battery
    		• Li-po 11.1V-1500mAh
  • Power
    		• twin C2410 brushless motors
  • Control
    		• 4CH RC 2.4G system, 4 servos
  • Range
    		• 1000 feet
  • Rudder can steer on ground
      ,
    • 2 x 25A brushless ESC
      • ,
    , ,
      ,
    • 4 CH Full RC - Aileron, Elevator, Rudder, Throttle
      • ,
    • Powerful brushless motor
      • ,
    • Excellent stability
      • ,
    • Ready to Fly in Just Minutes!
      • ,
    • Super tough
      • ,
    • Lightweight
      • ,
    • Shock Resistant Fuselage
      • ,
    • Strong Wings
      • ,
    • Pre-installed Electronics 
      • ,
    • Suitable for beginners and experts
      • ,
    • Only required 8 AA batteries for the transmitter to start flying
      • ,
    ,

    This 2.4G brushless motored flying boat is an amazing looking ...

    Read more

    NitroTek

    BARBARIAN NXL 1/8 SCALE RC NITRO MONSTER TRUCK 2.4G

  • Height
    		• 190mm
  • Length
    		• 550mm
  • Width
    		• 310mm
  • Wheel base
    		• 320mm
  • Track F/R
    		• 320mm
  • Ground clearance
    		• 28mm
  • Gear ratio
    		• 8.95
  • Weight
    		• 4300g

      ,
    , ,
      ,
    • 4WD, RTR, nitro powered monster truck;
      • ,
    • Newly C-hub steering system. King pin axis extends to the wheel centre, this improves steering performance;
      • ,
    • Newly developed suspension system, twin adjustable rear suspension modes for flexible driving mode & smooth driving mode;
      • ,
    • New lightweight ultra-compact gear box with a low centre of gravity and high durability;
      • ,
    • Front bumpers allow backward movement, this protects chassis from crash and jump impact;
      • ,
    • 6061-T6 solid aluminum chassis, centralised chassis design to allow quicker steering and fast response;
      • ,
    • Newer gear ratios, offers faster acceleration and higher speed;
      • ,
    • Easy to maintain and repair pinion gearbox;
      • ,
    • 16mm super big bore oil aluminum shocks;
      • ,
    • All steel gears, machined motor gear, machined diff. gear;
      • ,
    • Fully adjustable sway bar ball cups;
      • ,
    • Hardened alum. shock tower;
      • ,
    • Ultra-strength front and rear bumper;
      • ,
    • High torque steering 9kg servo with metal gear;
      • ,
    • Model is ball raced throughout
      • ,
    ,

    The ACME Barbarian NXL is a fully built, fully featured, ...

    Read more

    Follow us on

    Twitter Facebook f Linkedin in Google plus g
    BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby