RCPlanet
AQUACRAFT RECEIVER/ESC REEF RACER 2 A2 AQUM3502
, Length:, 2.1" (54mm), Width:, 1.25" (32mm), Thickness:, .35" (9mm), ,
AquaCraft receiver/Electronic Speed Control on channel A2 for the Hobbico ...RCPlanet
AQUACRAFT RECEIVER ESC A4 W/ON/OFF SWITCH MINI RIO AQUM3510
, Length:, 2.42" (61.5mm), Width:, 1.32" (33.6mm), Thickness:, 0.54" (13.7mm), ,
AquaCraft receiver/electronic speed control on channel A4 for the Mini ...RCPlanet
AQUACRAFT RADIO BOX 3 CHANNEL ASSEMBLED AQUB8602
, Length:, 7.7" (195mm), Width:, 2.2" (57mm), Height:, 2.4" (60mm), ,
AquaCraft 3-Channel assembled radio box for the Hobbico AquaCraft Top ...RCPlanet
AQUACRAFT PULL-PULL CABLE TUNNEL HULL AQUB7768
, Wire Diameter:, 1030mm (41"), Length:, 1.25mm (0.05"), ,
Wire Diameter: 1030mm (41") Length: 1.25mm (0.05") Requires: Installation on ...RCPlanet
AQUACRAFT PROP NUT RIO 51 AQUB7767
, Diameter:, .39" (10mm), Thickness:, .27" (7mm), ,
AquaCraft prop nut locknut design insures propeller is fastened securely. ...RCPlanet
AQUACRAFT PROP HUB ALLIGATOR TOURS AQUB7751
, Length:, 28mm (1.1"), Diameter:, 25.4mm (1"), ,
AquaCraft prop hub for the Alligator Tours Airboat w/Supertigre G34 ...RCPlanet
ASSOCIATED AE 8.0 ENGINE ASC25480
| Three turns counter clockwise from closed Low Speed Mixture | Five and one half turns counterclockwise from closed |
, Displacement:, .50 cu in (8.0cc), High Speed Mixture:, Idle Speed:, Turn screw until throttle opening inside throttle valve is .050" (1.3mm), Weight:, 14.5oz (410g), Distance Between Mounting Hole Centers Same Side:, 0.67" (17mm) Distance Between Mounting Hole Centers, Opposite Side:, 1.6" (42mm), Height from Mounting Tab Bottom to Top of Cylinder Head:, 3.9" (100mm), Height from Crankcase Bottom to Top of Cylinder Head:, 4.6" (116mm), Length from Backplate to Front Bearing:, 3.3" (83mm), Length from Backplate to Crankshaft End:, 0.63" (116mm), Width at Mounting Tabs:, 2.0" (50mm), Cylinder Head Diameter:, 2.2" (56mm), ,
Associated Nitro engine is a direct replacement engine for the ...RCPlanet
AIRTRONICS RX451R M11X SSR FHSS-3 2.4GHZ RECEIVER (FOR SSR SX) AIR92451
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .019lbs (0.30oz), Dimensions:, 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., Do NOT use Analog servos with this receiver. Use ONLY digital servos. If you use analog servos, the servos and/or receiver could be damaged. In addition, some older ESCs may not support the extremely high frame rate of this receiver., ,
The Airtronics 92451 4-Channel 2.4GHz FHSS-3 Super Response Surface Receiver ...RCPlanet
AIRTRONICS RX-461 TELEMETRY 2.4GHZ SURFACE RECEIVER (MT-4 FHSS-4T) AIR92010
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .021 lbs (0.34oz), Dimensions:, 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack., Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should, NOT, use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., You can use Analog or Digital servos with this receiver. For the best results, we recommend using Digital servos., ,
The Airtronics RX461 (92010) 4-Channel 2.4GHz FHSS-4T Surface Receiver is ...RCPlanet
AIRTRONICS RECEIVER - M11X/MX-3X 4CH 2.4GHZ FHSS-3 AIR92744
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .019 lbs (0.30oz), Dimensions:, 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack., When using a 2S Li-Po battery pack you should, NOT, use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., ,
The Airtronics 92744 4-Channel 2.4GHz FHSS-3 Surface Receiver is a ...RCPlanet
AIRTRONICS BATTERY HOLDER - 4-CELL W/ Z CONNECTOR AIR95040Z
, ,
This is the Airtronics Dry Cell Receiver Battery Holder with ...RCPlanet
AIRTRONICS BATTERY HOLDER - 4-CELL W/ SWITCH HARNESS AIR95045Z
, ,
This is an Airtronics Dry 4 Cell Receiver Battery Holder ...RCPlanet
AIRTRONICS 94322Z PRECISION HD BB STANDARD SERVO AIR94322Z
, Torque at 4.8v:, 46oz-in (3.3kg-cm), Torque at 6.0v:, 58oz-in (4.2kg-cm), Speed at 4.8v:, 0.19sec/60º, Speed at 6.0v:, 0.15sec/60º, Weight:, .10 lbs (1.60oz), Dimensions:, 1.54 x 0.79 x 1.42in (39.1 x 20.0 x 36.0mm), Gear Train:, Nylon, Bushing/Ball Bearing:, Single Ball Bearing, Motor Type:, Standard 3-Pole, Connector Type:, 'Z' Connector, Note:, If you're using this servo with an older Airtronics receiver that uses ATX connectors, a 'Z' to ATX adapter (P/N 479399) is required., ,
The Airtronics 94322Z Precision Heavy-Duty Standard Ball Bearing Servo is ...RCPlanet
TRAXXAS KEN BLOCK FIESTA, 1/16 BRUSHED WITH AM RADIO RTR TRA7308
| 5.04 | 1, (reversed input |
| 8.10 | 1 (stock, out-of-box) |
, Length:, 14" (356mm), Front Track:, 7.3" (185mm), Rear Track:, 7.3" (185mm), Weight:, 34oz (964g), Height (overall):, 4.72" (120mm), Wheelbase:, 8.1" (206mm), Wheel Diameter:, 1.9" (48mm), Shock Length (front/rear):, 44mm / 44mm, Front/Rear Tires (glued):, Gymkhana-Compound Slicks, Front/Rear Wheels:, Officially Licensed Volk TE37 in 'Monster-green', Electronic Speed Control:, Waterproof XL-2.5 ESC, Motor (electric):, Titan 12T 550, Transmission:, Heavy-Duty with Steel Idler Gear, Gear Ratio (internal):, Overall Drive Ratio:, Differential Type:, Hardened Steel Bevel, Sealed, Gear Pitch:, 48-Pitch, Chassis Structure/Material:, Molded Composite Nylon Monocoque, Brake Type:, Electronic, Drive System:, Shaft-Driven 4WD, Steering:, Bellcrank, Radio System:, TQ AM Radio, Top Speed:, 20+mph, Skill Level:, 2, Battery Tray Dimensions:, 89mm x 35.5mm x 20mm, Included Batteries:, 6-cell NiMh with Charger, Required Batteries:, 8 "AA" (transmitter), XL-2.5 Waterproof ESC, Input Voltage:, 4-8 Cells (4.8V - 9.6V DC), Case Size:, 26.5mm W x 46.5mm D x 22mm H, Weight:, 33 Grams, Motor Limit:, 10-turns, On Resistance (@Trans):, 0.008 Ohms, Reverse Delay:, None, BEC Voltage:, 6.0V DC, Power Wire:, 16 Gauge / 40mm, Input Harness Wire:, 26 Gauge / 130mm, Motor Wires:, 26 Gauge / 130mm, Transistor Type:, MOSFET, PWM Frequency:, 2300 Hz, Thermal Protection:, Thermal shutdown, Profile selection, Sport Mode:, 100% FWD, 100% brakes, 100% REV, Race Mode:, 100% FWD, 100% brakes, no REV, Training Mode:, 50% FWD, 100% brakes, 50% REV, Single-button setup:, Yes, Traxxas EZ-Set, ,
This is the 1/16 scale Traxxas Ken Block Fiesta RTR ...RCPlanet
TRAXXAS HULL, BLUE GRAPHICS: SPARTAN TRA5716
, ,
FEATURES: Molded plastic construction with blue, black and silver graphics ...