RCPlanet
AIRTRONICS RX451R M11X SSR FHSS-3 2.4GHZ RECEIVER (FOR SSR SX) AIR92451
, Frequency/Modulation Type:, 2.4GHz/FHSS-3, Nominal Input Voltage:, 4.8v ~ 7.4v, Weight:, .019lbs (0.30oz), Dimensions:, 1.43 x 0.94 x 0.59in (36.5 x 24.0 x 15.0mm), Fail Safe:, Yes (Programmable on All Channels), Receiver Battery Fail Safe:, Yes (3.8v Default / 3.5v ~ 5.0v Adjustable), Connector Type:, Universal 'Z', Note:, This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. Do NOT use a 3S Li-Po battery pack!, When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos., Do NOT use Analog servos with this receiver. Use ONLY digital servos. If you use analog servos, the servos and/or receiver could be damaged. In addition, some older ESCs may not support the extremely high frame rate of this receiver., ,
The Airtronics 92451 4-Channel 2.4GHz FHSS-3 Super Response Surface Receiver ...LowPriceRC
FEIYU FY-Y6 SHAPED STYLE 6 ROTORS SYSTEM
,
1564 FeiYu FY-Y6 Shaped Style 6 Rotors System Model Number: ...HobbyKing
TURNIGY MICRO QUAD V2 PNP ARF INCLUDES KK2.0 LCD FLIGHT CONTROL BOARD
| Width | 250mm |
| Height | 85mm |
| Battery Connection | JST |
***STOP Press!!*** UPDATED: This is the new Turnigy Micro Quad V2 which now includes our brilliant KK2.0 LCD flight control board!, Updated to include our KK2.0 Flight Control system:, The original KK gyro system has been updated to an incredibly sensitive dual chip 3 Axis gyro and single chip 3 axis accelerometer system making this the most stable KK board ever and allowing for the addition of an Auto-level function. At the heart of the KK2.0 is an Atmel Mega324PA 8-bit AVR RISC-based microcontroller with 32k of memory. An additional 2 motor output channels have been added to the KK2.0 allowing for a total of 8 motors to be controlled (Octocopter) to allow you to use this flight control system in any quad you wish!, Micro Quad Features:, • Light weight design, Included in box:, 1 x Turnigy Integrated PCB Plug and Fly Micro Quad (motors/ESCs/ KK2.0 control board pre-installed), Required items:, 500-900mAh 2S 7.4V Lipoly Battery, Specs:, Motor:, 4 x Turnigy T1811-2900kv Brushless, ESC:, 4 x Turnigy Plush 6A, Props:, 4 x 5x3 inch (2CW & 2CCW), Control Board:, Hobbyking KK 2.0 LCD Flight Control,
This tiny yet brilliantly designed PNP micro quad makes getting ...5 Reviews
ngHobbies
MIKROKOPTER QUADRO XL
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Quadro |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...LowPriceRC
FEIYU FY-Y6 SHAPED STYLE 6 ROTORS SYSTEM
,
FY-Y6 Y Shaped Style 6 Rotors System RC 3D Flying ...HobbyKing
POWERBOX COMPETITION W/ SENSOR SWITCH (OLED VERSION)
| Supports three battery types | NiMh/NiCd, LiFePo |
| Dropout voltage | approx. 0,25 V |
| Servo signal resolution | 0,5µs |
| Bus systems | Spektrum, Multiplex |
| Temperature range | - 30 °C to + 75 °C |
| Weight | 115 g |
| SensorSwitch | 15 g |
| EMV approval | EN 55014-1 |
| CE approval | 2004/108/EG |
Features:, High resolution graphical OLED screen with 128x64 pixels, Specification:, Operating voltage:, 4,0 Volts to 9,0 Volts, Power source:, 2 x two-cell LiPO batteries 7,4 Volts, Current drain:, Power-on state approx. 130 mA, Max. receiver and servo current:, 2 x 10 A (stabilised), 2 x 20 A (Peak - Dependant on cooling), Signal frame rate:, User variable - 9ms, 12ms, 15ms, 18ms, 21ms, Screen:, OLED 128 x 64 pixels, graphic, Servo sockets:, 18 sockets, 12 channels, 4 of them match-channels, Dimensions:, 110 x 72 x 24 mm (incl. base plate),
The PowerBox Competition is the latest innovation from PowerBox Systems. ...3 Reviews
HobbyKing
1:5 SCALE NITRO RC MOTOR BIKE READY TO GO
| Features | 100% factory built |
| Specs | Length |
| Width | 120mm (without gaurd wires) |
| Height | 260mm |
| Weight | 1,874 grams (Ready to run) |
This 1:5 Scale Nitro RC Bike comes with dual front friction-damped forks as well as adaptable rear oil filled monoshocks. It's Aluminium side frames which are tough as well as rigid make this bike responsive, light and quick. This Nitro RC Bike is 100% factory assembeled and ready to run, powered by a Sanye .15 gas engine, also included is the 2 high speed servos for greater control. Just include your RX and battery to power up the receiver and the servos, Don't forget to fill up the fuel tank!,
Factory painted Ducati 999R bodywork powerful .15 Nitro engine Front ...5 Reviews
LowPriceRC
FEIYU TECH FLIGHT STABILIZATION SYSTEM PRO
FY-90Q PRO controller is specially designed for QuadCopter use. The Attitude Flight Stabilization System (AFSS), which is an integrated 3-axis gyroscope and 3-axis accelerometer. AFSS forms a comprehensive inertial based navigation platform that calculated 3D flight attitude using proprietary FeiYu Tech algorithm. ,
1551 Feiyu Tech Flight Stabilization System Pro Model Number: FY-90QPRO ...Hobby-Lobby
DX18 SYSTEM WITH AR9020, MD2 BY SPEKTRUM
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Receiver | AR9020 |
| Range | Full |
| Telemetry | Yes |
| Computer Radio | Yes |
| Experience Level | Advanced |
| Frame Rate | 11/22 Ms |
| Resolution | 2048 |
DX18 Highlights:, 50 Model Memory, Technical Specifications:, DX8 8Ch Transmitter w/AR8000 Specs:, Number of Channels, Programming Features:, Airplane/Heli/Sailplane, Model Memory:50, Modes:, Selectable 1, 2, 3 or 4,
DX18 has the pro-class tools you need. To truly fly ...Hobby-Lobby
LCD BACPAC
Enhanced Convenience:, Framing complex scenes; see what you are shooting, LCD BacPac Features:, Attaches to 1080p HD HERO cameras featuring the rear HERO Port, What's Included:, 1 LCD BacPac screen,
LCD BacPac The LCD BacPac is a detachable LCD screen ...HobbyKing
FRSKY TFR8 SB 8CH 2.4GHZ S.BUS RECEIVER FASST COMPATIBLE
| Operating Voltage Range | 3.5V~10V |
| Dimension | 44.5x27.5x17mm |
| Weight | 11.5g |
Compatibility:, FASST 2.4G Air Systems (7CH Mode/Multi Mode):, 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.., Features:, • Compatible with FASST 2.4GHz Air Systems (7CH Mode/Multi Mode)., Specs:, Number of Channels:8, Operating Temperature Range:, -10~80 degree Celsius, Servo Frame Rate:, 14ms (FS-Normal Speed Mode), 7ms (HS-High Speed Mode),
FrSky TFR8 SB 8ch 2.4Ghz S.BUS Receiver FASST Compatible (with ...5 Reviews
HobbyKing
FRSKY TFR4 SB 3/16CH 2.4GHZ S.BUS RECEIVER FASST COMPATIBLE
| • FASST 2.4G Air Systems (7CH Mode/Multi Mode) | 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, etc.. |
| • FASST 2.4G Surface Systems (C1 Mode) | 3PK, 4PK, etc.. |
| • Compatible servos via SB port | Futaba S.BUS servos, FrSky D12MB servo |
| Operating Voltage Range | 3.5V~10V |
| Dimension | 41x24x6mm |
Compatibility:, Features:, • Compatible with FASST 2.4GHz Air Systems (7CH Mode/Multi Mode) & Surface Systems (C1 Mode), Specs:, Number of Channels:, 3~16 (4~16ch in S.BUS mode), Operating Temperature Range:, -10~80 degree of Celsius, Servo Frame Rate:, 14ms (FS-Normal Speed Mode), 7ms (HS-High Speed Mode), Weight:6g,
FrSky TFR4 SB 3/16ch 2.4Ghz S.BUS Receiver FASST Compatible (with ...5 Reviews
RCTimer
MULTICOPTER X650 V4 2836 & ESC10A
| Empty Frame Weight | 470 |
| Maximum Gross Take-Off Weight | 1650g. DO NOT OVERLOAD ON X650 Value WHICH CAN |
Package:, 1 Set * RM650 Frame,
Multicopter X650 V4 2836 & ESC10A 10x4.5" Prop X650V-4 LEAD ...RCTimer
MULTICOPTER X650 V4 2836-20A SETS
| Empty Frame Weight | 470 |
| Maximum Gross Take-Off Weight | 2000g. DO NOT OVERLOAD ON X650 Value WHICH CAN |
Package:, 1 Set * RM650 Frame,
Multicopter X650 V4 Sets X650V-4 LEAD TO DANGER. 4 * ...HobbyKing
ZYX-S 3-AXIS FLYBARLESS SYSTEM W/USB PROGRAM ADAPTER
| Size | 37x25x13mm |
| Operating Voltage | 3.5~9V |
| Flight Modes | F3C / 3D |
ZYX-S 3-axis gyro system provides two different helicopter flight modes - F3C and 3D, which can satisfy pilots from beginners to advanced. It also now supports 4 additional aircraft configurations as well: Quadcopter +, quadcopter X, standard fixed wing and delta fixed wing. This makes the ZYX-S a very versatile stabilization system suitable for virtually all types of aircraft., *Note:, We have tested this unit on our HK450PRO and are very impressed with the performance. The ZYX-S flybarless system is an unbelievable value at a fraction of the cost of other systems currently on the market. Check out the video below of us testing this unit on the HK450PRO flybarless., Specs:, Weight:, 9.8g (without wires), Sensor Technology:, 3 MEMS angular rate sensors, Included in box:, ZYX-S 3-Axis Flybarless System,
The ZYX-S high performance multi-function 3-axis gyro system is the ...5 Reviews