HobbyKing
JR RG631B 6-CHANNEL FULL RANGE 2.4GHZ DMSS RECEIVER W/TELEMETRY
| Model | RG631B |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 46.5mm |
| Width | 20mm |
| Height | 12.5mm |
| Voltage Range | 4.5–8.5V |
| Antenna Length | 150mm |
Key Features:, • Designed for full range flight in any size model, Specs:, Type:, Full range aircraft receiver, Channels:6, Weight:9g,
JR RG631B 6-Channel Full Range 2.4GHz DMSS Receiver with telemetry. ...5 Reviews
HobbyKing
JR RG831B 8-CHANNEL FULL RANGE 2.4GHZ DMSS RECEIVER W/TELEMETRY
| Model | RG831B |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48mm |
| Width | 25.5mm |
| Height | 14.5mm |
| Weight | 15g |
| Voltage Range | 4.0–8.5V |
| Antenna Length | 150mm |
Key Features:, • Designed for full range flight in any size model, Specs:, Type:, Full range aircraft receiver, Channels:8,
JR RG831B 8-Channel Full Range 2.4GHz DMSS Receiver with telemetry. ...HobbyKing
JR RG1131B 11-CHANNEL FULL RANGE 2.4GHZ DMSS RECEIVER W/TELEMETRY
| Model | RG1131B |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48.5mm |
| Width | 32mm |
| Height | 14.5mm |
| Weight | 18.5g |
| Voltage Range | 4.5–8.5V |
| Antenna Length | 150mm |
Key Features:, • Designed for full range flight in any size model, Specs:, Type:, Full range aircraft receiver, Channels:11,
JR RG1131B 11-Channel Full Range 2.4GHz DMSS Receiver with telemetry. ...HobbyKing
JR XG8 8-CHANNEL 2.4GHZ DMSS TRANSMITTER W/RG831B RECEIVER (MODE 1)
| Modulation | DMSS |
| Band | 2.4GHz |
| Mode | Mode |
| Transmitter Battery | 6.4V 1400mAh Li-Fe |
| Model | RG831B |
| Type | Full range receiver |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48mm |
| Width | 25.5mm |
| Height | 14.5mm |
| Weight | 15g |
| Voltage Range | 4.5V~8.5V |
| Antenna Length | 150mm |
Standard XG8 System includes:, • RG831B 8CH DMSS 2.4GHz receiver, Key Features:, • Large, backlit screen, Transmitter Specs:, Channels:8, Receiver:, RG831B 8-channel full-range receiver, Programming Features:, Airplane, sailplane, helicopter, Model Memory:30, Receiver Specs:, Channels:8,
Using specifically developed JR® DMSS* technology, the all-new XG8 radio ...HobbyKing
JR XG8 8-CHANNEL 2.4GHZ DMSS TRANSMITTER W/RG831B RECEIVER (MODE 2)
| Modulation | DMSS |
| Band | 2.4GHz |
| Transmitter Battery | 6.4V 1400mAh Li-Fe |
| Model | RG831B |
| Type | Full range receiver |
| Modulation | DMSS |
| Band | 2.4GHz |
| Length | 48mm |
| Width | 25.5mm |
| Height | 14.5mm |
| Weight | 15g |
| Voltage Range | 4.5V~8.5V |
| Antenna Length | 150mm |
Standard XG8 System includes:, • RG831B 8CH DMSS 2.4GHz receiver, Key Features:, • Large, backlit screen, Transmitter Specs:, Channels:8, Receiver:, RG831B 8-channel full-range receiver, Programming Features:, Airplane, sailplane, helicopter, Model Memory:30, Mode:, Mode 1, 2, 3, 4 selectable - (mode 2 default), Receiver Specs:, Channels:8,
Using specifically developed JR® DMSS* technology, the all-new XG8 radio ...HobbyKing
FPV RADIO TELEMETRY KIT - 915MHZ
| Features | • Very small size |
| Band | 915MHz |
| Antenna connectors | RP-SMA connector |
| Sensitivity | -117dBm sensitivity |
| Interface | Standard TTL UART |
| Connection status | LED indicators |
Specs:, Output power:, 100mW (20dBm), adjustable between 1-20dBm, Includes:, Radio Telemetry base station (USB Connection),
This Radio Telemetry kit offers a great low price, longer ...5 Reviews
HobbyKing
NTM PROP DRIVE 28-26 1000KV / 315W (SHORT SHAFT VERSION)
| Motor Wind | 19T |
| Max current | 21A |
| Weight | 54g |
| ESC | 20~30A |
| Cell count | 3s~4s Lipoly |
| Bolt holes | 16mm & 19mm |
| Note | An accessory pack is available for this motor. Please see the related items below. |
Specs:, Model:, NTM Prop Drive Series 2826 1000kv, Kv:1000rpm/v, Poles:3, Max Power:, 200W @ 11.1V (3S) / 315W @ 15V (4S), Bolt thread:M3, Connection:, 3.5mm Bullet-connector, Prop Test Data:, 9x4.7 - 11.1V / 113W / 10.2A / 0.632kg thrust,
This is a short shaft version of our popular NTM ...5 Reviews
ngHobbies
MIKROKOPTER BASIKSET OKTO XL
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-OktoXL |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
MIKROKOPTER BASIKSET HEXA XL
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-HexaXL |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
MIKROKOPTER BASIKSET L4-ME
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included in this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Quadro?action=show&redirect=en%2Fassembly |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, 1 x preassembled FlightCtrl ME V2.1 with Altitude Sensor, Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
MIKROKOPTER BASIKSET HEXA 2
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Hexa |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
MIKROKOPTER BASIKSET OKTO 2-26
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Okto |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...ngHobbies
MIKROKOPTER BASIKSET OKTO
| http | //www.nghobbies.com/cart/index.php?main_page=page&id=23 |
| Note | There is NO battery included with this kit. |
| http | //www.mikrokopter.de/ucwiki/en/MK-Okto |
| http | //www.mikrokopter.com/ucwiki/en/Mikrokopter-Get-started |
| http | //www.mikrokopter.com/ucwiki/en/FlightCtrlManual |
| http | //www.mikrokopter.com/ucwiki/en/BrushlessCtrl |
| http | //www.mikrokopter.com/ucwiki/en/SerCon |
| http | //www.mikrokopter.com/ucwiki/en/ElectronicConnections |
| http | //www.mikrokopter.com/ucwiki/en/MikroKopter-Tool |
| http | //www.mikrokopter.de |
| http | //forum.mikrokopter.de/forum-17.html |
NOTE:, Please note this kit is, Please make sure you read and understand the warranty information on these kits before purchasing:, The Mikrokopter is an open source project with a very big support from Germany and all over Europe. The Mikrokopter kit contains everything to get the Mikrokopter in the air in about 5-10 hours of work. The skills needed to make this happen are: soldering, mechanical, good understanding of electronics, airplanes. To fly the Mikrokopter you need a good understanding of helicopter controls. If you ever flew a model helicopter you'll be flying the Mikrokopter in no time., The package contains:, , Documentation:, Assembly manual:, English getting started page:, English Flight controller manual:, English Brushless ESC manual:, English Serial converter manual:, English wiring diagram:, English Mikrokopter tool:, There is also an international section of the Mikrokopter forum:,
pre-order only . We will order this when you place ...HobbyKing
TRACKSTAR 18 LED BATTERY POWERED PIT LIGHT
Specifications:, Input:, 1s LiPo 3.7V Battery, Lighting:, 18 x White Colour (6500K) LEDs, Technical:, Built-in Discharge Cut Off, Power:, Built in battery inside the unit 2600Mah 1s Lipo,
The new super bright 18 LED Folding Pit Light from ...5 Reviews
HobbyKing
SERVO SPLITTER LEAD 1 FEMALE TO 5 MALE
| Lead length | 60mm |
Spec:, Weight:3g,
This handy little accessory will allow you to easily split ...5 Reviews