ReadyMadeRC
GRAUPNER CAM SPEED PROP 5.5" X 4.3"
,
Overview Propeller series for electric-powered pylon racing models and other ...ReadyMadeRC
GRAUPNER CAM SPEED PROP 6" X 6"
,
Overview Propeller series for electric-powered pylon racing models and other ...ReadyMadeRC
GRAUPNER CAM SPEED PROP 5" X 5"
,
Overview Propeller series for electric-powered pylon racing models and other ...ReadyMadeRC
IRC - 5.8 GHZ SPIRONET OMNI SMA ANTENNA RHCP - SINGLE ANTENNA
,
Includes only 1 antenna for those only need one piece ...ReadyMadeRC
CELLPRO POWERLAB 8 V2 WITH EC5 INPUT CABLE, 1344W
| Pack capacity | 20 mAh to 360Ah |
| Voltage resolution | 78uV (16 bit) |
| Voltage tolerance | +/- 6mV |
| Charge current | +/- 1% |
| Capacity added to pack | +/- 1% |
| Percent capacity (“Fuel”) | +/- 5% (with accurate fuel table defined for battery being charged) |
For Battery types:, Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 10s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA), Input voltage:, 10-32VDC, reverse polarity protected, Input current:, 1A to 60A, software limited, Power conversion:, Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current, Output battery charge current:, Adjustable range 10mA to 40A, limited by 60A input current*, Output battery discharge current:, Internal discharge 10mA to 10A, 100W max Regenerative discharge 10mA to 40A, 1344W max**, Continuous max output power:, 612W @ +12VDC input, 1344W @ +26.35VDC, Cell balancing:, Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging, Voltage calibration:, Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV, Current calibration:, Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA, Measurement accuracy:, Serial data output:, 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity, Data integrity:, Checksum, CRC checking, Cooling fans:, Twin, 13 CFM, 50mm diameter, Heat sink:, Internal 200W aluminum, thin finned, Output battery connector:, “Cellpro” compatible, JST PA series, 9 position, LCD:, 2 line, 16 character, light grey/blue backlit, Size:, 5.82" x 6.55" x 3.57", Footnotes:, *,
UNLEASH THE POWER! The industry's first 1344W Battery Workstation now ...ReadyMadeRC
FUIM3 USB INTERFACE MODULE FOR 2-WAY DATA COMMUNICATION
,
This high speed, opto-isolated, PC USB interface module is designed ...ReadyMadeRC
FY-40A INERTIAL FLIGHT STABILIZATION SYSTEM
| Mode 1 | Deactivated Mode |
| Mode 2 | Stabilized Mode |
| Mode 3 | 3D Mode |
| Supported servo output | 50Hz refresh frequency |
| Recommended Transmitter | PCM or 2.4GHz with minimum 5 channels |
| Working Voltage Range | DC 4.8V~5.5V (0.05A@5V, Powered by ESC) |
| Operating Temperature | -20°C ~ 50°C |
| Max Gyro Angular Velocity | 2000°/s |
| Weight&Dimensions | FY-40A 17g(45mm x 30mm x 9 mm) |
has an integrated three-axis gyro and three-axis accelerometer which controls the aircraft movement in three-dimensional space. Installation is very simple.By using your remote control, the unit can be turned on or off for the following functions:, Supported aircraft :, , Specifications:, ,
FY-40A ——In this mode, the FY-40Aauto stabilization is turned off. ...ReadyMadeRC
LED MAGICIAN V2.0 - CONTROLLER BOARD
,
The LED Magician - The Simplest Way to Add Blinking ...ReadyMadeRC
DJI - E600 REPLACEMENT 3508 MOTOR - CW
,
From magnets to steel, from copper wire to bearing we ...ReadyMadeRC
DJI - E600 REPLACEMENT 3508 MOTOR - CCW
,
From magnets to steel, from copper wire to bearing we ...ReadyMadeRC
HS-7955TG HIGH TORQUE, TITANIUM GEAR, CORELESS ULTRA PREMIUM
| Motor Type | Coreless |
| Bearing Type | Dual Ball Bearing |
| Speed (4.8V/6.0V) | 0.19 / 0.15 |
| Torque oz./in. (4.8V/6.0V) | 250 / 333 |
| Torque kg./cm. (4.8V/6.0V) | 18.0 / 24.0 |
| Size in Inches | 1.57 x 0.78 x 1.45 |
| Weight ounces | 2.29 |
| Weight grams | 64.92 |
Size in Millimeters:, 39.88 x 19.81 x 36.83,
Product Description Hitec's best servo just got better. Based on ...ReadyMadeRC
DJI - 12 X 4.2 SELF TIGHTENING BLACK PROPS
,
With the state of the art areodynamic efficiency and only ...ReadyMadeRC
PARALINX ARROW - HD TRANSMITTER AND RECEIVER SET
| Supported framerates | 23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i, 60p |
| Transmitter | 3.7"L x 1.3"W x 0.5"H , 40g |
| Receiver | 4"L x 2.4"W x 1"H |
The motion picture industry's first affordable yet professional wireless HD system. Uncompressed 4:2:2 1920x1080 10-bit video. Less than 1ms latency. Supports multiple framerates and resolutions. Operates on 5v power (Transmitter requires 1A, Receiver 2.1A). Range of over 300ft (91m) line-of-sight. 256-bit encryption of transmitted signals. FCC, CE, and ROHS certified. HDMI video input/output. Transmitter weighs less than 40 grams. Plug & Play--no set-up required., In the box:, 1 Paralinx Arrow transmitter,
1 Paralinx Arrow receiver 1 Paralinx USB Regulator [PTap] 1 ...ReadyMadeRC
VAS - 1.3 GHZ BLUEBEAM RIGHT ANGLE WHIP ANTENNA SET RHCP
| Contains TWO antennas | 3 lobe TX, and 4 lobe RX |
| 1280MHz | 80 mph |
| Connector type | SMA male (Choose Straight or Right Angle) |
| Whip length | 2″/5cm |
Max speed without significant deflection:, Radiation pattern:,
Now you can choose straight or right angle connectors below! ...ReadyMadeRC
IRC - 5.8 GHZ SPIRONET PATCH DIRECTIONAL CP ANTENNA (LHCP)
| VSWR < 1.5 | 1 (5740 - 5860MHz) |