Flying-Hobby
MIK4357 MINI V-BAR V 5.2 FLYBARLESS STABILIZATION SYSTEM
| - If using a primary receiver, Mini V-Bar is compatible with the following 2.4GHz receivers | Spektrum, Jeti, Fasst. |
| - Dimensions | 28 x 37 x 13 mm |
| - Weight | 11 g |
| Contents | - Mini V-Bar |
| - Patch Cables | 3.1" For use with a primary receiver (if you opt NOT to use Satellites) |
Compatibility Notes:, - Mini V-Bar Blueline can, Overview:, The Mini V-Bar is the worlds smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini V-Bar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. When light weight is a priority, the Mini V-Bar is your best choice. New version 5.2 Express Software allows for simplified programming and very easy flight tuning!, model helicopters with only a few limitations. Do not use the Mini V-Bar in the following types of helicopters:, - Large Scale heli's, Features:, - Programming is done via Control Panel or via USB using the PC software., Specs:, - 3-Axis Gyro System,
Aside from the nice new Blue case, the Mini V-Bar ...Flying-Hobby
CC BEC PRO 20A 12S SWITCHING REGULATOR
| 1.69" (43mm) x 1.3" (33mm) x 0.94" (24mm) , Weight (w/o wires) | 1 oz (29 g) |
| Max Input | 12S LiPo (50.4V) |
| Max Output Current | 20 amps peak |
| Adjustable Output Voltage | 4.8V-12.5V |
| Max Continuous Current (Input Voltage/Max Continuous Output Current) | 16V/15A, 24V/13A, 32V/11A, 40V/9A, 48V / 8A |
Flying-Hobby
OUTRAGE BL 9188 HIGH VOLTAGE BRUSHLESS DIGITAL TAIL SERVO
Features:, , Specifications:, , Package Includes:, , NOTE:, This servo is a dedicated tail servo only and will not function as a throttle servo, or when plugged directly into a receiver. Servo is designed to work at a specific pulse rate that the tail gyro sends., For Align GP780 Users:, In order to place the GP780 gyro into 760µs frame rate, the rudder stick,
Product description Outrage TORQ Servos - When Good Just Isn't ...Flying-Hobby
DELRIN TAIL PUSH ROD GUIDES (WHITE) - T-REX 450 PRO
Description:-, Includes:, -Two CNC delrin tail push rod guide, Features:*,
The Tail Push Rod Guide is designed to replace stock ...Flying-Hobby
TAIL ROTOR HUB
| FEATURES | Aluminum construction |
| INCLUDES | One tail rotor hub |
| REQUIRES | Installation onto tail assembly |
Flying-Hobby
FUTABA BLS156HV HIGH VOLTAGE HIGH TORQUE SERVO
| Speed | 0.12sec/60 ° (7.4V) |
| Torque | 21.0kg • cm (7.4V) |
| Speed | 0.15sec/60 ° (6.0V) |
| Torque | 18.0kg • cm (6.0V) |
Specs:,
Product description FUTM0750 Futaba BLS156HV Brushless High Torque High Voltage ...Flying-Hobby
CO PILOT II SYSTEM COMBO 2
| Part Number | CPII-C2 |
| CPII Computer Module | 0.61 oz (19gm) |
| CPII Main Sensor | 0.23 oz (7gm) |
| CPII Vertical Sensor | 0.16 oz (5gm) |
| IRNet Router | 0.26 oz (8gm) |
Having trouble deciding which system to buy? Read the following:, CPII-C1 is the basic system. All features are similar to the other combo's, but without the vertical sensor, automatic temperature calibration is not available. Calibration is simple to do and without the vertical sensor installed, the menu system will automatically include another option for calibration. Calibration should be performed 1 time per flying day, or whenever the weather conditions change drastically. Also, without the vertical sensor installed, the aircraft is likely to recover from inverted flight using a split-S maneuver (half of an outside loop) which, if the aircraft is not at high enough altitude can result in contact with the ground. The vertical sensor, when installed, always forces Co Pilot II to roll the aircraft from inverted flight with little loss of altitude. Finally, without the vertical sensor, certain 3D flight modes such as knife edge and vertical hover are not possible. Combo 1 also does not include the PC interface which means you will not be able to access automatic firmware updates using a personal computer running Windows operating systems., To view video demonstrations, click the YouTube links below:, CPII Quick Setup Video, Size:, CPII Computer Module (LxWxH):, 1.754" x 1.115" x 0.460", CPII Main Sensor (LxWxH):, 0.965" x 0.965" x 0.360", CPII Vertical Sensor (LxWxH):, 0.965" x 0.701" x 0.360", IRNet Router (LxWxH):, 1.205" x 1.005" x 0.532" (not including mount tabs), Weight:, Ratings:, System will operate on normal R/C voltage range of approximately 3.5v to 6v., Power Source:, System is powered from your radio's receiver., Applications:, Adds safe and effective flight stabilization to any R/C model aircraft for assistance in learning new aerobatic manuevers,, Radio:, The Co Pilot 2 is not an RF device and therefore it will operate with any type or brand of R/C radio system in,
Co Pilot II System Combo 2 The NEW Co Pilot ...Flying-Hobby
KBDD EXTREME EDITION TAIL BLADE FOR BLADE MCPX - NEON LIME
| Qty | 2 per pack |
Flying-Hobby
KBDD HP 90 PADDLES - NEON GREEN 4MM
| Length | 95mm |
| Weight | 15.8g/paddle average for the 90, weight matched to within .1g |
:, ,
Product Details KBDD paddles are perfect for aggressive 3D flying. ...Flying-Hobby
SAB CARBON FIBER LANDING GEAR (1PC) - GOBLIN 700
,
Product description Carbon Fiber Landing Gear (1pc)Flying-Hobby
KBDD 50/600 EXTREME EDITION PADDLES - NEON YELLOW 3MM FLYBAR
,
Product description KBDD paddles are perfect for aggressive 3D flying. ...Flying-Hobby
DELRIN TAIL PUSH ROD GUIDES - T-REX 550E
Description:, -The Tail Push Rod Guide is designed to replace stock plastic tail servo mount for T-REX 550E helicopters. It is CNC cut with light weight delrin and has screws to be able to adjust and and secure the position of the push rod guide on the T-REX 550E tail boom., Features:*,
Precision CNC delrin products. *Designed with adjustable feature with set ...Flying-Hobby
KBDD 500 PADDLES - NEON ORANGE 2.5MM FLYBAR
| -Length | 76mm |
| -Weight | 8g (per paddle) |
| Color | NEON ORANGE |
Features:, -Holes for 2.5mm flybars,
Product Details