ngHobbies
GOPRO HERO 3 RIGHT ANGLE FPV IMMERSIONRC CABLE
feed from a GoPro 3 Hero HD camera to an Immersion RC video transmitter. The right angle cable and the USB connector fits the GoPro Hero 3 cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection,
This cable offers FPV audio and video Orange - Video ...ngHobbies
GOPRO HD (1 AND 2) FPV IMMERSIONRC VIDEO CABLE
feed from a GoPro Hero HD camera to an Immersion RC video transmitter. The 2.5mm right angle jack fits the GoPro Hero cameras AV plug and the 5 pin Molex type connector has been provided to be plug and play with the video 2.4GHz and 5.8GHz transmitters designed and manufactured by Immersion RC. The 5 pin Molex connector has the following connections:, Brown - Ground connection,
This cable offers FPV video Red - Not Connected Orange ...ngHobbies
3DR PIXHAWK AUTOPILOT W/O GPS AND PPM ENCODER
| • Weight | 38g (1.31oz) |
| • Width | 50mm (1.96") |
| • Thickness | 15.5mm (.613") |
| • Length | 81.5mm (3.21") |
Note: Pixhawk is a PPM-input autopilot, which means that it gets RC input from a single cable to the receiver, either via the PPM port, the Futaba S.BUS port, or the special satellite receiver port for Spektrum gear. Most modern RC receivers (and all those sold by 3D Robotics) allow for PPM output, but some, such as non-S.BUS Futaba receivers, do not., Pixhawk includes:, • Pixhawk autopilot, Microprocessor:, • 32-bit STM32F427 Cortex M4 core with FPU, Sensors:, • ST Micro L3GD20 3-axis 16-bit gyroscope, Interfaces:, • 5x UART (serial ports), one high-power capable, 2x with HW flow control, Power System:, • Ideal diode controller with automatic failover, Weight and Dimensions:,
Pixhawk is an advanced autopilot system designed by the PX4 ...ngHobbies
GOPRO HERO 3 FPV CABLE WITH POWER
. The USB connector fits the GoPro Hero 3 cameras AV plug and the 3 pin servo type connector has been provided to be a convenient connection to other FPV transmitter solutions. The 3 pin servo connector has the following connections:, Brown - Ground connection, The power requirement for the GoPro camera is minimum 1A at 5V. The provided servo cable connections are:, Red - +5V (Do not exceed 5V), Please note:, The Immersion RC or Fatshark transmitters CANNOT supply enough power on the 5V out line to power the GoPro camera in flight. DO NOT risk it, it will damage your Immersion RC transmitter - or you will loose your transmitter in the air!!!,
Beside the FPV audio and video feed from a GoPro ...ngHobbies
ACRO NAZE32
Package content:, - RC input breakout cable is included., :, following youtube video, - Configuration software:, Baseflight-Configurator, - User Manual:, Click here to download,
• Invensense MPU6050 MEMS accelerometer + gyro • Built-in Micro-USB ...ngHobbies
IPHONE INTERFACE CABLE
| Weight | 15g |
| Cable length | 2ft or about 60cm |
| http | //www.immersionrc.com/itelemetry |
Specifications:, Plug and play with most receivers., Documentation:, Click here, iPhone Application:, ,
The iPhone interface cable is a companion to the EzOSD ...ngHobbies
EZUHF 8CH RECEIVER
| Width | 28mm |
| Height | 20mm |
| Length | 70mm |
| Weight | 20 grams (without antenna) |
Notice:, , Dimensions:, , Content of the pacakge:, 1 x EzUHF 8 channel Receiver, Note:, , Documentation:, , Support thread on RcGroups:,
The EzUHF 8-ch receiver which supports a diversity antenna configuration, ...ngHobbies
HITEC SKYSCOUT P2GO W MOTOR, ESC, SERVOS
| Wingspan | 54.5 in. |
| Weight | 24.5 oz. |
| Length | 38.6 in. |
| Wing Area | 372 sq. in. |
| Wing Loading | 5.47 oz./sq.ft. |
Product Downloads:,
The SkyScout is available in three unique and convenient packages ...ngHobbies
FATSHARK MIG HEADTRACKER
Features:, Built in gyroscopic sensors, Weight:, 150 gr., Documentation:,
One of the most affordable and most feature rich headtracker ...ngHobbies
DIVERSITY DUO 5.8 RECEIVER
| Receiver sensitivity | -85dBm |
| Frequencies | 5740, 5760, 5780, 5800, 5820, 5840, 5860MHz |
| Weight | 200 grams |
| Size | 80 x 100 x 23mm |
| Input voltage | 6 – 12V at 500 mA (3s Lipo Ideal) |
| Documentation | Coming soon |
Features:, A/V receiver with two (diversity) antenna inputs -,
The Immersion RC's Diversity Duo receiver is the best diversity ...ngHobbies
IMMERSIONRC AV POWERBOX
| Dimensions | 85 x 74 x 23mm |
| Weight | 120 g |
| Power Requirements | 6-12v, 250mA max. |
Features:, Twin Redundant power inputs,
Immersion RC`s Powerbox is a perfect companion of any modern ...ngHobbies
HIGH G GFORCE MICROSENSOR
Documentation:, Click here to download the manual,
Need to know how many G's you pulled in that ...ngHobbies
DIVERSITY DUO 2.4 RECEIVER
| Weight | 195 |
Features:, 1 button operation, Please note:, This system requires a 6-12V power source not included in the package., Size:, 110 x 83 x 26 mm, Documentation:, , Software to decode telemetry data for google earth:, Download now,
The Immersion RC's Diversity Duo receiver is the best diversity ...ngHobbies
MPI 70-100A WATT METER
| • Dimensions | 4.0 x 2.2 x 0.9 in, Weight |
Features:, • 70A continuous, 100A max,, Documentation:, Included in the package,
MPI's 70A watt meter should be part of any field ...