Skip to content

Hobby-Lobby

CHAMP RTF ULTRA-MICRO

Wingspan22.4 in. (517mm)
Overall Length14.3 in. (365mm)
Flying Weight1.3 oz. (38g)

The HobbyZone Champ is also equipped with the Spektrum 2.4GHz DSM2 advantage: The Champ's radio system uses the same Spektrum 2.4GHz DSM2 technology that is trusted by experienced RC pilots all around the world. With DSM2 technology you will enjoy complete freedom from signal interference whenever you fly., Champ RTF Highlights:, Everything you need to Teach Yourself to Fly in one box- even the batteries, Technical Specifications:, Champ RTF Specs:, Radio:, 4-channel 2.4 GHz Rx with Spektrum DSM2 3 channel receiver, CG (center of gravity):, Approximately 28mm from leading edge of the main wing, Prop Size:, 5.1 x 2.8 (130 x 70mm), Recommended Battery:, 3.7V 1S 150mAh LiPo (included), Charger:, DC 3.7V LiPo charger (included), Landing Gear:, Fixed main with steerable tail wheel,

The Champ takes the stress out of teaching yourself to ...

Hobby-Lobby

CHAMP RTF ULTRA-MICRO

Wingspan22.4 in. (517mm)
Overall Length14.3 in. (365mm)
Flying Weight1.3 oz. (38g)

The HobbyZone Champ is also equipped with the Spektrum 2.4GHz DSM2 advantage: The Champ's radio system uses the same Spektrum 2.4GHz DSM2 technology that is trusted by experienced RC pilots all around the world. With DSM2 technology you will enjoy complete freedom from signal interference whenever you fly., Champ RTF Highlights:, Everything you need to Teach Yourself to Fly in one box- even the batteries, Technical Specifications:, Champ RTF Specs:, Radio:, 4-channel 2.4 GHz Rx with Spektrum DSM2 3 channel receiver, CG (center of gravity):, Approximately 28mm from leading edge of the main wing, Prop Size:, 5.1 x 2.8 (130 x 70mm), Recommended Battery:, 3.7V 1S 150mAh LiPo (included), Charger:, DC 3.7V LiPo charger (included), Landing Gear:, Fixed main with steerable tail wheel,

The Champ takes the stress out of teaching yourself to ...

Hobby-Lobby

FIREBIRD STRATOS RTF

Wingspan42.0 in (1070mm)
Overall Length30.0 in (765mm)
Flying Weight17.0 oz (482 g)
Prop Size4.75 x 2.5

Stratos RTF Key Features:, Everything you need to fly RC today, and easy to assemble in minutes, Needed To Complete:, Nothing! Everything you need to get in the air is included., Technical Specifications:, Champ RTF Specs:, Radio:, 3-channel 2.4GHz transmitter, CG (center of gravity):, 0.8 in (20mm) in front of landing gear wire, Recommended Battery:, Rechargeable 7.4V 1300mAh Li-Po, Charger:, 2-Cell DC Balancing Li-Po Charger,

Flying made simple The HobbyZone Firebird Stratos includes everything you ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR VERSION 3.0 WITH DX5E W/DSMX

,

Phoenix R/C Pro Simulator Version 3.0 with DX5e Grab your ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR VERSION 3.0

,

Phoenix R/C Pro Simulator Version 3.0 Grab your transmitter and ...

Hobby-Lobby

KYOSHO AIRIUM SPITFIRE RECEIVER READY

,

Beautiful scale finish and great flight performance - just add ...

Hobby-Lobby

KYOSHO AIRIUM BF-109 RECEIVER READY

,

Compact airframe that flies like a much larger model A ...

Hobby-Lobby

KYOSHO AIRIUM SPITFIRE RTF

,

Beautiful scale finish and great flight performance A dream combination ...

Hobby-Lobby

PILOT PROFICIENCY KIT (DX6I WITH TWO AR400 AND PHOENIX 4)

All typessport, scale, heli, scale, gliders, jets and more

Key Features:, 2 Bonus AR400 Spektrum Receivers Included FREE!,

Everything you need to become a pro pilot The Phoenix ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR V4.0 W/DX5E

Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - NoteThe DX7se is not compatible with the simulator.

Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,

Phoenix R/C Pro Simulator V4.0 w/DX5e When the rain clouds ...

Hobby-Lobby

PHOENIX R/C PRO SIMULATOR V4.0

Spektrum DX4e/DX6/DX6i/DX7/DX7s/DX8 (No adapter required) - NoteThe DX7se is not compatible with the simulator.

Key Features:, Revolutionary InfinityScape 3D landscale generator lets you fly beyond the horizon over beautiful, ever-changing terrain that you create and control, To successfully use Phoenix, you will need the following:, IBM-compatible PC computer with 1.0 GHz Pentium 3/4 or AMD Athlon/64 compatible processor or better, Or alternatively:, An Intel-based Apple Macintosh computer running Microsoft Windows XP, Vista or 7 with the above specifications under one of the following systems:, Bootcamp (recommended), Adapter Requirements:, Adapters may be required depending on the transmitter you wish to use., Please note that the following transmitters are not supported:, No USB controller devices/joysticks,

Phoenix R/C Pro Simulator V4.0 When the rain clouds are ...

Hobby-Lobby

2100MAH 3S 11.1V 20C LIPO BATTERY

Battery TypeLiPo
Capacity2000 - 2999mAh
Connector TypeEC3
Height1.05 in (26.7mm)
Length4.05 in (103mm)
Maximum Continuous Current42A
Maximum Continuous Discharge20C
TypeLithium Polymer
Voltage11.1V
Weight6.6 oz (187g)
Width1.35 in (34.3mm)

WARNING: Lithium Polymer (Li-Po) batteries are significantly more volatile than the alkaline, Ni-Cd or Ni-MH batteries used in RC applications. All instructions and warnings found on the inside of this card must be followed exactly. Mishandling of Li-Po batteries can result in fire., 2100mAh 3S 11.1V 20C LiPo, 13AWG EC3 Highlights:, Capable of maximum continuous discharge rates up to 20C, placing this battery among the most powerful Li-Po battery packs in its class, Technical Specifications:, 2100mAh 3S 11.1V 20C LiPo, 13AWG EC3 Specs:, Configuration:3S, Number of Cells:3, Wire Gauge:13,

Spare 2100mAh 3S 11.1V 20C LiPo 13AWG EC3 E-flite High-Power ...

Hobby-Lobby

3200MAH 3S 11.1V 20C LIPO BATTERY

TypeLithium Polymer
Capacity3200mAh
Voltage11.1V
Main Power LeadsE-flite EC3 / Balancing
Weight10.9 oz (309g)
Length5.40 in (137mm)
Width1.70 in (43.2mm)
Height1.00 in (25.4mm)
Maximum Continuous Discharge20C
Maximum Continuous Current64A

WARNING: Lithium Polymer (LiPo) batteries are significantly more volatile than the alkaline, NiCd or NiMH batteries used in RC applications. All instructions and warnings found on the inside of this card must be followed exactly. Mishandling of LiPo batteries can result in fire., 3200mAh 3S 11.1V 20C LiPo Highlights:, Capable of maximum continuous discharge rates up to 20C, placing this battery among the most powerful LiPo battery packs in its class, Technical Specifications:, 3200mAh 3S 11.1V 20C LiPo Specs:, Connector Type:, Wire Gauge:13, Number of Cells:3, Configuration:3S,

This battery is part of E-flite's High Power LiPo Series ...

Hobby-Lobby

30MM TURBO SPINNER FOR 5MM SHAFT

These spinners have a hole in the front that lets air enter through the nose of the rc plane - a great way to cool the electric motor instead of using a fuselage air scoop. Included: turned aluminum spinner, middlepart yoke, screws for prop blades, and collet type motor shaft adapter. The width between the arms of the prop yoke is 8mm. AeroNaut folding propeller blades have 8mm wide hubs. For DKT3623, use Graupner Scimitar or CAM folding prop blades. For all others, use AeroNaut CAM Carbon or Classic Carbon folding prop blades.,

Turbo spinners have air intakes for motor cooling and include ...

Hobby-Lobby

30MM TURBO SPINNER FOR 3.2MM SHAFT

These spinners have a hole in the front that lets air enter through the nose of the rc plane - a great way to cool the electric motor instead of using a fuselage air scoop. Included: turned aluminum spinner, middlepart yoke, screws for prop blades, and collet type motor shaft adapter. The width between the arms of the prop yoke is 8mm. AeroNaut folding propeller blades have 8mm wide hubs. For DKT3623, use Graupner Scimitar or CAM folding prop blades. For all others, use AeroNaut CAM Carbon or Classic Carbon folding prop blades.,

Turbo spinners have air intakes for motor cooling and include ...

BevRC DPCAV Hobby-Lobby HobbyKing LowPriceRC ngHobbies NitroTek R2Hobbies RangeVideo RCTimer ReadyMadeRC HobbyWireless RCPlanet HorizonHobby HiModel OFM GetFPV AMainHobbies SDSHobby GoodLuckBuy Flying-Hobby