ReadyMadeRC
SKY SURFER FPV PAN/TILT POD KIT (FITS BIXLER V1)
When purchased with the pan/tilt kit, comes with a mounting plate that will fit many popular FPV cameras including:, , Note: careful routing of camera wiring is required to prevent binding during 180 degree or 360 degree operation., This kit will include*:, , Other options include:, , Note: for the "no servo" option, it is up to the customer to modify the assembly if required. The system was designed for TG9e or HS-65HB servos. Any other servo must be aligned properly for proper gear engagement., You'll need to supply:, , Manual:, Sky Sufer Pod Instructions,
A Sky Surfer FPV pod that uses a custom mechanism ...ReadyMadeRC
DRAGONLINK 2 LONG RANGE UHF RC SYSTEM
Includes:, 1 Transmitter Module, Notice: The use and operation of this product in the USA and many other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Ready Made RC, LLC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
One of the most popular long range UHF R/C systems, ...ReadyMadeRC
1.3 GHZ IBCRAZY SKY HAMMER ANTENNA
| Gain | 4.25dbic |
| Bandwidth | 1100 – 1520MHz |
| Horizontal beam | 360 degrees |
| Vertical beam | 35 degrees |
| Axial ratio | .82 |
| Gain | 1.5dbic |
| Axial ratio | .73 |
| Bandwidth | 900-1700MHz (It is really wide band!) |
Sky Hammer Specifications:,
Sky Hammer Antenna from IBCrazy (1.3GHz) Can also be split ...ReadyMadeRC
RCCC (RC CAMERA CONTROL SYSTEM)
| Size | 23mm x 40mm (including connectors) |
| http | //youtu.be/oiweyiRv2XU |
| http | //youtu.be/ilNBCHuLSoA |
RC Camera Control (RCCC) has following features:, , Weight: 8g, Available Shutter cables (sold separately):, Canon with C3 connector (like Canon 5D or 7D), Helpful videos for RCCC setup:, Setup when using sum PPM RCCC v1.1,
Introducing the 3 in 1, 3-way Video switch, RC Shutter, ...ReadyMadeRC
SMARTFPV - 3 WAY RC VIDEO SWITCH BY KRISTAPS
| All pin headers have same pin functions | GND, +V, Video |
Introduction:, SmartFPV 3 way RC video switch allows switching between 3 cameras while flying FPV. You can switch between flight camera, back view camera and camera facing down or use switch to see view from camera that takes pictures., Features:, - 3 video inputs, 1 video output, Connecting:, You can connect RC video switch to RC receiver’s regular servo channel or sum PPM connector. It will automatically detect type of RC signal., Configure PPM control channel:, To change PPM channel used to control video switch you need to toggle 8 times needed transmitter switch within 10s after video switch is powered ON., Video connectors:, SmartFPV video switch has 3 video inputs and 1 video output. Connection is made with common 3 pin servo style connectors., Video power:, All middle pins of 3 pin video connectors are interconnected to share same power between video cameras and video transmitter connected. You can power all devices either by feeding voltage to one of video devices connected or by soldering additional leads to battery input and connect battery. Battery connection leads are not included.,
- Regular servo channel or sum PPM control from RC ...ReadyMadeRC
2.3/2.4 GHZ IBCRAZY SKY HAMMER ANTENNA
| Gain | 4.25dbic |
| Bandwidth | 2250-2550 MHz |
| Horizontal beam | 360 degrees |
| Vertical beam | 35 degrees |
| Axial ratio | .82 |
| Gain | 1.5dbic |
| Axial ratio | .73 |
Sky Hammer Specifications:, ,
Sky Hammer Antenna from IBCrazy (2.3/2.4GHz) Can also be split ...ReadyMadeRC
FPV BEGINNERS COMBO: INCLUDES RTF SKY SURFER, PREDATORV2GOGGLES
This combo includes:, , *Notice: The use and operation of this product in the USA and other countries requires an amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility of the purchaser to ensure that the use of this product meets the requirements imposed by your government’s rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. ReadyMadeRC cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations.,
Do you or someone you know want to get in ...ReadyMadeRC
FR SKY - TARANIS X9D TRANSMITTER, MODE 2, 2000MAH (NO RECEIVER)
Note:, This is is the latest version from Fr-Sky that does not include the aluminum case, but has the increased capacity, 2000mAH battery., Model:, , Operating Temperature Range:, , Operating System:, , Transmitting Frequency:, , System:, , Power Supply:, , Current Drain:, , Operating Humidity:, , Includes:, , UHF Pin-Out:,
FEATURES Quad Ball Bearing Gimbals Receiver Match Audio Speech Outputs ...ReadyMadeRC
OUTRUNNER BRUSHLESS MOTOR MOUNT FOR EASYSTAR/SKY SURFER/BIXLER
,
Laser cut motor mount that fits into the EasyStar stock ...ReadyMadeRC
SKY SURFER RTF BRUSHLESS (1.4M)
| Wingspan | 1372mm (54 inch) |
| Length | 915mm (36 inch) |
| Flying Weight | 624g (22 oz) |
| Drive System | 2620 Brushless |
| Speed Controller | 20A |
| *NOTE | Current version uses bullet type connectors and not deans/t-connector types |
| Battery | 11.1V 1300mAh Li-Po (basic charger included) |
| *NOTE | Current version uses bullet type connectors and not deans/t-connector types |
| Control system | 4 CH 2.4GHz |
| Radio Control Range | 3000 |
*Note: There are people looking at what they are calling "version 1" and "version 2" of this plane. They really aren't version 1 or 2, but they are just different versions of this plane. Mine are what people are calling version 1, just as the pictures show. This is MUCH better for FPV since there is a ton of space inside the fuselage. The "version 2" planes ruined the usefulness for FPV by putting the servos and control arms inside the fuselage. The tubes for the control arms add strength to the fuselage in this version. My store is focused on FPV, so the equipment I carry will be what is best for FPV!, *Not to be distributed or linked to by other companies who like to take other people's work. You know who you are... :), Servos:, 4X 9g high speed micro, Requires:, , Note for beginner pilots: Although this plane is super easy to fly, it's a good idea to find local flying help from an experienced pilot. This can help with the small amount of assembly that is required and with the first flights. It's difficult to give support remotely when someone is totally new to the hobby, so the local help and help from,
RTF with pre-installed servos, brushless motor , ESC, and 2.4GHz ...ReadyMadeRC
EASY STAR/SKY SURFER/BIXLER ADJUSTABLE MOTOR MOUNT
| Position 1 | stock height up to a 6" prop. |
| Position 2 | (+) 0.41" for up to a 7" prop. |
| Position 3 | (+) 1.0" for up to an 8" prop. |
| Total Weight | 20g |
Three step installation:, , Included:, 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws., Notes:, A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Compatible Motors:, , Acceptable bolt patterns (units in mm):, 16x16, 16x19, 19x19, 19x25, 25x25,
This CNC machined aluminum two piece mount is designed to ...ReadyMadeRC
WING SET FOR SKY SURFER WITH INSTALLED SERVOS
,
Wing set for Sky Surfer with factory servos and control ...