HobbyKing
DM55 55CC 2-STROKE GAS ENGINE W/ CDI
| Bore x stroke | 45 x 35mm |
| Piston displacement | 55.665cc |
| Min. idle rotating speed | 1400rpm |
| Rotate Speed | 1,400rpm-9,000rpm |
| Compression ratio | 7.5 |
| Spark plug | NGK CM-6 style |
| Dimensions | 195 x 140 x 210mm |
| Weight | 1.490kg |
Specification:, Max. power:, 5.5HP/7,500rpm 6800RPM-22x10 2 blade wood prop, Carburetor:, Walbro choke type/diaphragm, Start mode:, Anticlockwise Push Prop Start,
DM55 55cc 2-Stroke Gas Engine w/ CDI Electronic ignition-CDI5 Reviews
HobbyKing
KD36-50-07S 5000KV BRUSHLESS INRUNNER (9T)
| Dimensions | 36~50mm |
| Shaft size | 5mm |
| Weight | 220g |
| Idle Current | 6.1A |
| Resistance | .0045 |
| Max Amp | 97A |
Kv: 5000rpm/V (9T),
The KD36 inrunners are equivilent to 540 size motors. Front ...5 Reviews
HobbyKing
TURNIGY 2730 BRUSHLESS MOTOR 3000KV
| Diameter of shaft | 3mm |
| Length of front shaft | 10mm |
| Magnet type | 45SH |
| Thrust | 320~410g |
| Prop | 5x3~6x3 |
| ESC | 12A |
| Max Current | 8.5~11A |
| Battery Type | 2S Only |
| Download data files | TURNIGY MOTOR DATA |
Dimension:, 32mm x 27mm, 42mm(with shaft), Weight:, 25g (kv3000) (not including connectors), Lamination thickness: .,
2mm Suited for small indoor, and KT-Board style flyers.5 Reviews
HobbyKing
TURNIGY 30FPS ULTRA-MINI DIGICAM (WITHOUT MEMORY CARD)
| Size | 57x21x19mm |
| Weight | 19g incl. battery |
| Video | 720x480 pixel |
| Battery | 200mAh Lipo |
| Resolution | VGA |
| FPS | 30 (True Rating) |
| Camera lens | 2-million CMOS |
| Angle of view | 72 degree |
| Audio format | Wave |
| Minimum illumination | 1LUX |
| Continuous video recording time | 40min/2GB |
| Power consumption | 150mA/3.7V (max.) |
| Storage temp. | -10~70C |
| Operating temp. | -10~60C |
| USB interface | USB1.1/2.0 |
| Operating system | 2000/XP/Vista 32 |
| Storage consumption | 1.83GB/35min |
| Charge period | About 2 hours |
| Included accessories | Turnigy 800 camera |
:, Ultra-small size alloy housing, Specification:, Voice-activated standby time:, 250 hours standby time, Type of memory card:, Micro SD card/TF card (Not included), Capacity of memory card:, Can support upto 16GB (max.), Player software:, Media player / KM player,
Requires a Fast spec SD memory for smooth high rate ...5 Reviews
HobbyKing
GWS BE-FOUND
| Model | BF-1 |
| [Normal Operation Voltage] 4.8V~7.2V (Max Voltage | 10.0V) |
5 Reviews
HobbyKing
TURNIGY 450/500 H2223 BRUSHLESS OUTRUNNER 2900KV
| Model | 2223 |
| Cells | 2~4S |
| No load Current | 2.7A/10V |
| Max power | 600W |
| Weight | 82g |
| Shaft diameter | 3.17mm |
| Dimensions | 27.2 x 42mm |
| Recomended ESC | 2~4S/50A |
Turns: 6, Kv: 2900rpm/V,
This motor is specifically designed for the 450/500 helicopter range ...5 Reviews
HobbyKing
HOBBYKING AP-02 7000KV BRUSHLESS MICRO MOTOR (2.3G)
| Lipo Range | 1S 3.7V |
| Suggested prop | 2508-3020 |
| Burst current (10sec) | 2.5A |
| Weight | 2.3g (including mount and wire) |
| Shaft | 1.5mm |
| Shaft length | 4mm |
| Dimensions | 13 x 8mm |
| Voltage | 3.7V |
| Current | 0.9A |
| Thrust | 19g |
| Voltage | 3.7V |
| Current | 1.8A |
| Thrust | 27g |
Kv: 7000rpm/v, Max current: 2A, Test data:, 2508 prop (Recommended),
High quality micro motors. Precision wound with silver-copper wire and ...5 Reviews
HobbyKing
ADH30S MICRO BRUSHLESS OUTRUNNER 7500KV
| Weight | 2.6g |
| Size | 17 x 13mm |
| Current | 4.2V/0.4A (No load) |
| Shaft | 1mm |
| Shaft length | 5mm |
| Prop | 2510 |
| Voltage | 4.2V |
| Current | 2.40A |
| Watts | 10.08W |
| Thrust | 32g |
| Efficiency (g/w) | 3.17 |
Kv:6100rpm/v, Max current:2A,
Suitable for LAMA2 and similar micro helicopters. Test data; GWS ...5 Reviews
HobbyKing
TURNIGY 480S BL INRUNNER MOTOR W/ IMPELLER 1500KV
| Diameter of shaft | 4mm |
| Length of front shaft | 13mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1500kv |
| Max current | 60A |
| No load current | 0.9A |
| Internal resistance | 49.3ohm |
| Data | 3S 11.1V |
| Prop | APC12x6 |
| Max Current | 11.4A |
| Pull | 610g |
| Prop | APC7x4, APC8x3.8 |
| Max Current | 23.5A, 34A |
| Pull | 1080g, 1300g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 47mm x 30mm, 60mm(with shaft), Weight:, 109g (kv1500) (not including connectors), Lamination thickness: .,
2mm Spec. 4S 14.8V5 Reviews
HobbyKing
C1822 MICRO BRUSHLESS OUTRUNNER 2100KV (14G)
| Diameter | 18mm |
| Length | 23mm |
| Shaft | 4mm |
| Weight | 14g (with 10cm wire) |
| Power | 50W |
| Resistance | 453 |
| Idle Current | .2A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Turns: 20, Kv: 2100rpm/v,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
HOBBYKING SS SERIES 18-20A ESC
| Weight | 18g |
| Size | 32x47x4mm |
| Cells | 2-3S (Auto Detect) |
| Max Current | 18A |
| Burst | 20A |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
BEC: 2A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
IMAX B6 CHARGER/DISCHARGER 1-6 CELLS (COPY)
| Input Voltage | 11~18v |
| Circuit power | Max Charge |
| Charge Current Range | .1~5.0A |
| Discharge current range | .1~1.0A |
| Ni-MH/NiCd cells | 1~15 |
| Li-ion/Poly cells | 1~6 |
| Pb battery voltage | 2~20v |
| Weight | 277g |
| Dimensions | 133x87x33mm |
| Note | Power supply not included. |
: If you would like accurate and reliable charging, please see the related link below for the iMAX B6 GENUINE.,
This is a copied B6 charger. It's quality and reliability ...5 Reviews
HobbyKing
5INCH RATCHET CLAMP TOOL
| Max opening | 3.5cm |
5 Reviews
HobbyKing
TURNIGY AQUASTAR 120A WATER COOLED ESC
| Brake | (None/Soft) |
| Throttle range | 640uS |
| Constant Current | 120A |
| Burst Current | 150A |
| Battery | 2-6S Lipoly |
| BEC | 3.5A/5v switching BEC, max 4A |
| Motor Type | Sensorless Brushless |
| Size | 90 x 36 x 20mm |
| Weight | 100g |
MosFET type: IR,
Ultra fast microprocessor controlled and extremely low resistance circuit and ...5 Reviews
HobbyKing
TURNIGY G10 BRUSHLESS OUTRUNNER 1100KV
| Battery | 2~3 Cell /7.4~11.1V |
| RPM | 1100kv |
| Max current | 32A |
| No load current | 10V/2.10A |
| Current capacity | 42A/15sec |
| Internal resistance | 0.04 ohm |
| Diameter of shaft | 5mm |
| Dimensions | 68x35mm |
Weight:, 149g (not including connectors),
Designed to be a direct swap out for your 10 ...5 Reviews