HobbyKing
HOBBYKING XP 3A 1S 0.7G BRUSHLESS SPEED CONTROLLER
Max Voltage | 4.2v |
BEC | Not required. power supplied directly from 1S battery. |
Programable | Yes |
Weight | 0.7g |
Dimensions | 11x13x8mm |
Cont. Current: 3A, Burst Current: 4A,
HobbyKing XP 3A 1S 0.7g Brushless Speed Controller The HK ...5 Reviews
HobbyKing
TURNIGY 540S V-SPEC INRUNNER W/ IMPELLER 1350KV
Diameter of shaft | 5mm |
Length of front shaft | 13mm |
Battery | 3-4 Cell 4S/14.8V |
RPM | 1350kv |
Max current | 40A |
No load current | 2.1A |
Internal resistance | 75.2ohm |
Data | 3S 11.1V |
Prop | APC7x4, APC10x4.7 |
Max Current | 16.6A, 37A |
Pull | 720g, 1260g |
Prop | APC7x4 |
Max Current | 29A |
Pull | 1100g |
ESC | 60A |
Battery Type | 3-4S Only |
Dimension:, 52mm x 36mm, 66mm(with shaft), Weight:, 141g (kv1350) (not including connectors), Lamination thickness: .,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
TURNIGY T600 BRUSHLESS OUTRUNNER FOR 600 HELI (1100KV)
Weight | 369g |
Turns | 10T |
Voltage | 5~7S |
Max Current | 110A |
Diameter of shaft | 6mm |
Length of front shaft | 21.5mm |
ESC | 100~120A |
Specifications:, Dimension:, 58mm x 49mm, 78mm(with shaft), Kv:1100rpm/V,
Is your 600 heli ready for the next level in ...5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 3550KV
Model | 2218 |
Turns | 3.5 |
Cells | 2~3S |
No load Current | 4.7A/10V |
Max power | 500W |
Weight | 67g |
Dimensions | 27.2 x 36.5mm |
Recomended ESC | 2~3S/30A |
Kv: 3550rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews
HobbyKing
TURNIGY 450 H2218 BRUSHLESS OUTRUNNER 1860KV
Model | 2218 |
Cells | 2~4S |
No load Current | 1A/10V |
Max power | 500W |
Weight | 67g |
Shaft diameter | 3.17mm |
Dimensions | 27.2 x 36.5mm |
Recomended ESC | 2~4S/50A |
Turns: 5, Kv: 1860rpm/V,
This motor is specifically designed for the 450 helicopter range ...5 Reviews
HobbyKing
TURNIGY 540L V-SPEC INRUNNER W/ IMPELLER 1025KV
Diameter of shaft | 5mm |
Length of front shaft | 14mm |
Battery | 3-4 Cell 4S/14.8V |
RPM | 1350kv |
Max current | 40A |
No load current | 2.4A |
Internal resistance | 58.3ohm |
Prop | APC9x4.5, APC10x4.7 |
Max Current | 18.9A, 30.5A |
Pull | 920g, 1360g |
Prop | APC8x3.8, APC9x4.5 |
Max Current | 24.5A, 28.5A |
Pull | 1230g, 1580g |
ESC | 60A |
Battery Type | 3-4S Only |
Dimension:, 58mm x 36mm, 72mm(with shaft), Weight:, 173g (kv1025) (not including connectors), Lamination thickness: ., Data:, 3S 11.1V,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
FOKKER DR.I TRIPLANE EPO R/C PLANE (PNF)
Wing Span | 800mm |
Length | 670mm |
Flying Weight | 750~900g |
Servo | 3x4.3g 1x9g |
Motor | TURNIGY 2410-890Kv |
ESC | 20A Brushless |
Propeller | 9x4 Slow Fly |
LiPo Battery | 1000~1300mAh 3S (max size |
LiPo Battery | 1000~1300mAh 3S (max size |
5 Reviews
HobbyKing
TURNIGY 500 H3126 BRUSHLESS OUTRUNNER 1600KV
Model | 3126 |
Cells | 2~6S |
No load Current | 4.1A/10V |
Max power | 1500W |
Weight | 186g |
Shaft diameter | 5mm |
Dimensions | 37.2 x 42mm |
Recomended ESC | 2~6S/70A |
Turns: 4, Kv: 1600rpm/V,
This motor is specifically designed for the 500 helicopter range ...5 Reviews
HobbyKing
KB28-47-16S 2400KV BRUSHLESS MOTOR (FIN)
Shaft Size | 3.17mm x 12mm |
Motor Dimensions | 28mm x 48mm |
Weight | 163g |
Idle current | 1.0A |
Resistance | 0.0385 |
Kv: 2400, Max Amp: 25,
KB28-47-16S Brushless Motor KB28-47-16S5 Reviews
HobbyKing
TURNIGY 1220 MINI GEARBOX SYSTEM 10300KV
Diameter of shaft | 1.48mm |
Length of front shaft | 7mm |
Battery | 1 Cell 1S/3.7V |
RPM | 10300kv |
No load current | 3.7V/0.4A |
Current capacity | 7A/15sec |
Internal resistance | 0.342ohm |
Dimensions | 12x22mm |
Dimension:, 22mm x 12mm, 30mm(with shaft), Weight:, 8.4g (kv10300) (not including connectors), Lamination thickness: ., Max current:6A,
2mm Spec.5 Reviews
HobbyKing
HOBBYKING SS SERIES 8-10A ESC
Size | 30x18x2mm |
Cells | 2-3S (Auto Detect) |
Burst | 10A |
Battery setting | LiPo and NiMH |
Brake | Enable/Disable |
Weight: 6g, Max Current: 8A, BEC: 1A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
C2226 MICRO BRUSHLESS OUTRUNNER 1800KV (21G)
Diameter | 22.2mm |
Length | 28mm |
Shaft | 5mm |
Weight | 21g (with 10cm wire) |
Power | 70W |
Resistance | 657 |
Idle Current | .5A |
Max amp | 10A (15sec burst) |
Voltage | 2-4cell Lipoly |
Kv: 1800rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-34S
Dimentions | 22x28mm |
Rating | 1500kv |
Battery Config | 2~3Lipo |
Shaft | 3.175mm |
Weight | 29gr |
Standard Current | 2-6A |
Max Current: 8A,
5 Reviews
HobbyKing
HEXTRONIK 24GRAM BRUSHLESS OUTRUNNER 1500KV
No Load Current | .5A |
Suggested Lipo | 3 cell 11.1v |
Thrust | 400g+ |
Suggested Prop | 8x3.8 |
Max Load: 7A,
Brushless Outrunner Motor. Kv - 1500 Load Current 9A For ...5 Reviews
HobbyKing
TURNIGY AE-30A BRUSHLESS ESC
Output | Continuous 30A, burst 35A up to 10 seconds. |
Input Voltage | 2-4 cells lithium battery or 5-12 cells NIMH battery. |
BEC | Linear 2A @ 5V |
Control Signal Transmission | Optically coupled system. |
Max Speed | 2 Pole |
6 Pole | 70,000rpm |
12 Pole | 35,000rpm |
Size | 50mm (L) * 26mm (W) * 12mm (H). |
Weight | 25g. |
Multiple protection features | Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection |
Factory default settings | Brake |
Battery type | Li-xx (Li-ion or Li-Po) |
Low voltage cutoff threshold | Soft cut-off (2.6V) |
Timing setup | Low |
Soft Acceleration Start Up | Normal |
Low voltage cutoff type | Medium |
Specification:, Features:, High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency., Programming features:, Brake setting (we recommend using brake for only folding props applications),
The Turnigy AE series are based on new powerful microprocessor. ...5 Reviews