HobbyKing
HACKER STYLE BRUSHLESS OUTRUNNER 20-22L
| Dimentions | 28x32mm |
| Rating | 924kv |
| Battery Config | 3 Lipo Cells |
| Shaft | 3.175mm |
| Weight | 56gr |
| Standard Current | 6-14A |
| Max Current | 17A |
| Suggested Prop | 11x4.7 |
5 Reviews
HobbyKing
HOBBYKING SS SERIES 35-40A ESC
| Weight | 27g |
| Size | 45x24x8mm |
| Cells | 2-3S (Auto Detect) |
| Max Current | 35A |
| Burst | 40A |
| Maximum Kv supported | 2000rpm/v |
| Battery setting | LiPo and NiMH |
| Brake | Enable/Disable |
BEC: 3A,
The Hobbyking SS series comes with a limited range of ...5 Reviews
HobbyKing
KB28-47-22S 1800KV BRUSHLESS MOTOR (FIN)
| Shaft Size | 3.17mm~12mm |
| Motor Dimensions | 28mm~48mm |
| Weight | 163g |
| Idle current | .6A |
| Resistance | 0.0715 |
Kv: 1800, Max Amp: 18,
KB28-47-22S Brushless Motor KB28-47-22S5 Reviews
HobbyKing
HK2836 EDF OUTRUNNER 3500KV FOR 64MM
| Specs | Kv- |
| Dimensions | 75 x 28mm |
| Shaft diameter | 3.0mm |
| Shaft length | 10mm |
| Voltage | 14.8V |
| Weight | 97g |
| Output Power | 520w |
| Max current(<60s) | 35A |
| RPM/V | 3500 |
| Thrust | 1100g(38.8oz.) |
| Recommended model weight | 600-800g |
| Recommended model fans | 64mm Fans |
| Mounting Hole Bolt Circle | 18mm |
| Mtg. Hole Number & Size | 4 x M2 |
5 Reviews
HobbyKing
TURNIGY 1:4 SCALE BRUSHLESS GOKART ARR.
| Length | 450mm |
| Width | (F)262mm / (R)305mm |
| Height | 201mm |
| Ground Clearance | 5~12mm |
| Top Speed | 45~60km/h |
| Tyres | 56×30mm / 58×45mm |
| Pinion | 13T |
| Driving Weight | 2,100g (approx.) |
| LiPo | 2S 4000~5200mAh Hardcase Lipo (140x48x50mm max size) |
The TURNIGY 1:4 scale gokart is a real blast to drive, with it's low center of gravity and ultra sticky TruRubber* tyres which keep the kart turning sharply. A powerful full size servo is included with kart to keep the steering precise and quick, while the non differential rear tyres lay rubber on each corner!, Gear Ratio: 13:2.37, Drive/Main Ratio: 13:47, T-Tube/Main Ratio: 20:30, TruRubber: TURNIGY's very own super-soft rubber compound that sticks to road surfaces better than standard street tyres.,
The entire floor pan is made of 4mm Carbon fiber ...5 Reviews
HobbyKing
T-45 R/C EPO JET (KIT)
| Specifications | Wing Span |
| Length | 880mm |
| Flying weight | ~610g |
| Ducted fan | 64mm Fan unit (included) |
| Battery compartment | 90x46x46 (MAX) |
| Motor | B2040 Brushless inrunner (to suit 64mm EDF fan unit) |
| ESC | 30A |
| Servo | 3 x 9g |
| Radio | Your own Tx/Rx |
Radio Channels: 4, Required:, Battery 1500mah 3s1p,
The T-45 Is an aircraft carrier capable training jet still ...5 Reviews
HobbyKing
HOBBYKING 50WATT 5A X-CHARGER/BALANCER
| Operating voltage range | 10.0~18.0Volt |
| Charge current range | 0.1~5.0A |
| Discharge current range | 0.1~1.0A |
| Current drain for balancing Li-po | 300mAh/cell |
| NiCd/ NiMH battery cell count | 1~15cells |
| Lithium battery cell count | 1~6Series |
| Pb battery voltage | 2 to 20V |
| Dimension | 135×100×40mm |
Circuit power:, max.50W for charging, max.5W for discharging,
The HobbyKing HKC6 charger/balancer features programing functionality found in more ...5 Reviews
HobbyKing
S2030-6570 BRUSHLESS INRUNNER 6560KV (7T)
| Motor Size | 2030 |
| RPM/V | 6560kv (7T) |
| Max Load | 14A |
| Max Volts | 11.1v (2~3s lipo) |
| Max Watts | 120w |
| Resistance | 0.0437 |
| Diameter | 20mm |
| Front Mounting Hole Distance | 16mm or 17mm |
| Shaft Diameter | 3mm |
| Shaft Length | 10mm |
| Can Size | 130 |
| Weight | 45g |
Front Mount Thread Size:, 16mm M2.5 / 17mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
S3674-2370 BRUSHLESS INRUNNER 2370KV (19.5T)
| Motor Size | 3674 |
| RPM/V | 2370kv (19.5T) |
| Max Volts | 14.8 (2~4s) |
| Max Load | 95A |
| Max Power | 1600watts |
| Resistance | 0.0064 |
| Diameter | 36mm |
| Front Mounting Hole Distance | 25mm |
| Front Mount Thread Size | M3.0 |
| Shaft Diameter | 5mm |
| Shaft Length | 16mm |
| Can Size | 540 |
| Weight | 378g |
Plug type:, 4mm Bullet-connector,
5 Reviews
HobbyKing
SU47 TWIN 55MM EDF JET (KIT)
| Length | 1024mm |
| Wingspan | 750mm |
| Wing Area | 12.7dm2 |
| Flying weight | ~700g |
| Wing Loading | 55g / dm2 |
| Servo | 3 x 9g (Required) |
| ESC | 2 x 18A (Required) |
| Servo | 3 x 9g |
| ESC | 2 x 18A |
| Radio | Your own Tx/Rx |
Specs:, Ducted fan:, Twin 55mm 3 Blade Fan units (Included), Battery:, 11.1v 2200mah 20c (Required), Battery Area:, 38mm x 27mm x 105mm (MAX), Required:, Motor:, 2 x 2040 4300kv Brushless inrunner (with 2.3mm shaft), Battery:, 11.1v 2200mah 3S1P 20c,
Developed by Sokhoi in Russia as an experimental aircraft to ...5 Reviews
HobbyKing
S2858-2630 BRUSHLESS INRUNNER (2630KV)
| Motor Size | 2858 |
| RPM/V | 2630kv |
| Max Load | 38A |
| Max volts | 14.8v 2~4s |
| Max Watts | 700w |
| Resistance | 0.0222 |
| Diameter | 28mm |
| Front Mounting Hole Distance | 16mm or 19mm |
| Shaft Diameter | 3.17mm |
| Shaft Length | 14mm |
| Can Size | 380 |
| Weight | 180g |
Front Mount Thread Size:, 16mm M2.5 / 19mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
RCG 30CC GAS ENGINE W/ CD-IGNITION 3.9HP/2.94KW
| Displacement | 30cc |
| Carburettor | Walbro type |
| Prop Speed | 1500 ~ 9000rpm |
| Max power | 3.9hp / 2.9kw |
| Power Supply | 4.8-6v |
| Lubrication oil | 2 cycle engine oil |
| Bore/Stroke | 36mm x 30mm |
Weight:, 980g (Including ignition and muffler), Suggested prop:, 18x8, 18x10, 19x8, 20x8 (standard two blade prop), Ignition:, DC-CDI (computer controlled auto advance electric ignition system), Mixture:25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews
HobbyKing
RCG 15CC GAS ENGINE W/ CD-IGNITION 2.1HP/1.54KW
| Displacement | 15cc |
| Carburettor | Walbro type |
| Prop Speed | 1500 ~ 9800rpm |
| Max power | 2.1hp / 1.54kw |
| Shaft diameter | 8mm |
| Power Supply | 4.8-6v |
| Lubrication oil | 2 cycle engine |
| Bore/Stroke | 31mm x 26mm |
Weight:, 825g (Including ignition and muffler), Suggested prop:, 15x6 7800rpm (standard two blade prop), Ignition:, DC-CDI (computer controlled auto advance electric ignition system), Mixture:25:1 to 40:1,
With its easy starting characteristics and reliable low-maintenance running the ...5 Reviews
HobbyKing
S2848-3900 BRUSHLESS INRUNNER 3900KV (11.5T)
| Motor Size | 2848 |
| RPM/V | 3900kv (11.5T) |
| Max Load | 41A |
| Max volts | 12v 2~3s |
| Max Watts | 500w |
| Resistance | 0.0155 |
| Diameter | 28mm |
| Front Mounting Hole Distance | 16mm or 19mm |
| Shaft Diameter | 3.17mm |
| Shaft Length | 12mm |
| Can Size | 380 |
| Weight | 142g |
Front Mount Thread Size:, 16mm M2.5 / 19mm M3.0, Plug type:, 3mm Bullet-connector,
5 Reviews
HobbyKing
S3650-3980 BRUSHLESS INRUNNER 3980KV (11T)
| Motor Size | 3650 |
| RPM/V | 3980kv (11T) |
| Max Load | 72A |
| Max volts | 11.1v 2~3s |
| Max Watts | 750w |
| Resistance | 0.0086 |
| Diameter | 36mm |
| Front Mounting Hole Distance | 25mm |
| Front Mount Thread Size | M3.0 |
| Shaft Diameter | 5mm |
| Shaft Length | 16mm |
| Can Size | 540 |
| Weight | 222g |
Plug type:, 4mm Bullet-connector,
5 Reviews